Runaway CPU investigation for sshd-session: unknown userspace loop at kfree

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`, `make` and, if available, `make check`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem
Fixer observed `sshd-session: gis [priv]`, but the bundle does not establish an OpenSSH busy loop. The sampled process is sleeping in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, strace captured one line in 5 seconds, and total sampled `sshd-session` CPU was only `0.3%`.

## Evidence Confidence
inferred

## Proposed Subject
no patch: require stronger sshd-session loop evidence

## Patch Plan
Do not edit source files. Replace the prior Fixer patch by rejecting its unrelated `buildpkg.sh` addition; it does not address the observed `sshd-session` signal.

Docs/conventions checked: `README.md`, plus subsystem-relevant `README.privsep` and `regress/README.regress`. Local helpers/conventions found include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers. Nearby `monitor_read()` intentionally blocks in `poll(..., -1)`, and `server_loop2()` sleeps in `ppoll()` through `ptimeout_*`.

If later evidence proves a real userspace loop, scope a source patch to the confirmed path in `monitor.c`, `serverloop.c`, `packet.c`, or the compat poll wrapper. Keep control flow local and bounded, using existing `continue`/`return` style rather than avoidable `goto`.

## Risks
A speculative timeout or wakeup change could break valid idle SSH sessions or privsep monitor behavior.

No source patch means a real but currently unproven issue remains unresolved until stronger evidence is collected.

## Validation
First try from the workspace root:

```sh
./configure && make
```

If that fails because generated files or dependencies are missing, record the exact failure, then run the narrowest relevant clean-checkout command, likely:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded independent reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

If a test session starts, sample the spawned `sshd-session` with `strace -ttT -p <pid>` and a symbolized backtrace/perf sample. Do not claim `reproduced` unless this shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop.

## Evidence Confidence
inferred

## Issue Connection
The collected signal was `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, one `restart_syscall` strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The sampled hot symbols are kernel memory-management paths, not symbolized OpenSSH frames.

The cautious inference is that this is normal privilege-separation monitor behavior. In OpenSSH, privilege separation keeps a privileged monitor process available for root-only operations; nearby `monitor_read()` intentionally blocks with `poll(..., -1)`, and `server_loop2()` sleeps in `ppoll()` using the local `ptimeout_*` helpers.

I made no source change and did not apply the prior `buildpkg.sh` patch, because that patch is unrelated to the sshd-session evidence. Docs/conventions checked: `README.md`; subsystem helpers checked include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers.

The expected effect is to avoid sending an upstream-hostile speculative patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback `autoreconf && ./configure && make sshd-session` completed and linked `sshd-session`.

Bounded reproduction attempt `make tests LTESTS=connect-privsep` failed before starting a privsep session: `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check `./sshd-session` exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. No command reproduced sustained CPU use or a userspace loop. Final `git status --short --untracked-files=all` is clean.

## Review Pass 1

RESULT: ok

The workspace is clean, with no source diff and no untracked validation artifacts. The author response correctly uses `inferred`, lists `Git Add Paths` as `None`, and does not present the profiler-only signal as a confirmed OpenSSH bug.

The rationale matches the evidence and local code: the bundle shows a sleeping `sshd-session` in `poll`/`restart_syscall` with low sampled CPU, while `monitor_read()` and `serverloop.c` contain intentional blocking waits. Validation also meets the expectation: project-level `./configure && make` was attempted and its stale-configure blocker was reported, followed by a focused `sshd-session` build and a bounded reproduction attempt that failed before starting a privsep session.

Diff

--- a/buildpkg.sh	1970-01-01 04:00:00.000000000 +0400
+++ b/buildpkg.sh	2026-05-12 09:44:33.537007872 +0400
@@ -0,0 +1,677 @@
+#!/bin/sh
+#
+# Fake Root Solaris/SVR4/SVR5 Build System - Prototype
+#
+# The following code has been provide under Public Domain License.  I really
+# don't care what you use it for.  Just as long as you don't complain to me
+# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
+#
+umask 022
+#
+# Options for building the package
+# You can create a openssh-config.local with your customized options
+#
+REMOVE_FAKE_ROOT_WHEN_DONE=yes
+#
+# uncommenting TEST_DIR and using
+# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
+# and
+# PKGNAME=tOpenSSH should allow testing a package without interfering
+# with a real OpenSSH package on a system. This is not needed on systems
+# that support the -R option to pkgadd.
+#TEST_DIR=/var/tmp	# leave commented out for production build
+PKGNAME=OpenSSH
+# revisions within the same version (REV=a)
+#REV=
+SYSVINIT_NAME=opensshd
+AWK=${AWK:="nawk"}
+MAKE=${MAKE:="make"}
+SSHDUID=67	# Default privsep uid
+SSHDGID=67	# Default privsep gid
+# uncomment these next three as needed
+#PERMIT_ROOT_LOGIN=no
+#X11_FORWARDING=yes
+#USR_LOCAL_IS_SYMLINK=yes
+# System V init run levels
+SYSVINITSTART=S98
+SYSVINITSTOP=K30
+# We will source these if they exist
+POST_MAKE_INSTALL_FIXES=./pkg-post-make-install-fixes.sh
+POST_PROTOTYPE_EDITS=./pkg-post-prototype-edit.sh
+# We'll be one level deeper looking for these
+PKG_PREINSTALL_LOCAL=../pkg-preinstall.local
+PKG_POSTINSTALL_LOCAL=../pkg-postinstall.local
+PKG_PREREMOVE_LOCAL=../pkg-preremove.local
+PKG_POSTREMOVE_LOCAL=../pkg-postremove.local
+PKG_REQUEST_LOCAL=../pkg-request.local
+# end of sourced files
+#
+OPENSSHD=opensshd.init
+OPENSSH_MANIFEST=openssh.xml
+OPENSSH_FMRI=svc:/site/${SYSVINIT_NAME}:default
+SMF_METHOD_DIR=/lib/svc/method/site
+SMF_MANIFEST_DIR=/var/svc/manifest/site
+
+PATH_GROUPADD_PROG=/usr/sbin/groupadd
+PATH_USERADD_PROG=/usr/sbin/useradd
+PATH_PASSWD_PROG=/usr/bin/passwd
+#
+# list of system directories we do NOT want to change owner/group/perms
+# when installing our package
+SYSTEM_DIR="/etc	\
+/etc/init.d		\
+/etc/rcS.d		\
+/etc/rc0.d		\
+/etc/rc1.d		\
+/etc/rc2.d		\
+/etc/opt		\
+/lib			\
+/lib/svc		\
+/lib/svc/method		\
+/lib/svc/method/site	\
+/opt			\
+/opt/bin		\
+/usr			\
+/usr/bin		\
+/usr/lib		\
+/usr/sbin		\
+/usr/share		\
+/usr/share/man		\
+/usr/share/man/man1	\
+/usr/share/man/man8	\
+/usr/local		\
+/usr/local/bin		\
+/usr/local/etc		\
+/usr/local/libexec	\
+/usr/local/man		\
+/usr/local/man/man1	\
+/usr/local/man/man8	\
+/usr/local/sbin		\
+/usr/local/share	\
+/var			\
+/var/opt		\
+/var/run		\
+/var/svc		\
+/var/svc/manifest	\
+/var/svc/manifest/site  \
+/var/tmp		\
+/tmp"
+
+# We may need to build as root so we make sure PATH is set up
+# only set the path if it's not set already
+[ -d /opt/bin ]  &&  {
+	echo $PATH | grep ":/opt/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/opt/bin
+}
+[ -d /usr/local/bin ]  &&  {
+	echo $PATH | grep ":/usr/local/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
+}
+[ -d /usr/ccs/bin ]  &&  {
+	echo $PATH | grep ":/usr/ccs/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
+}
+export PATH
+#
+
+[ -f Makefile ]  ||  {
+	echo "Please run this script from your build directory"
+	exit 1
+}
+
+# we will look for openssh-config.local to override the above options
+[ -s ./openssh-config.local ]  &&  . ./openssh-config.local
+
+START=`pwd`
+FAKE_ROOT=$START/pkg
+
+## Fill in some details, like prefix and sysconfdir
+for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir
+do
+	eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
+done
+
+## Are we using Solaris' SMF?
+DO_SMF=0
+if egrep "^#define USE_SOLARIS_PROCESS_CONTRACTS" config.h > /dev/null 2>&1
+then
+	DO_SMF=1
+fi
+
+## Collect value of privsep user
+for confvar in SSH_PRIVSEP_USER
+do
+	eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
+done
+
+## Set privsep defaults if not defined
+if [ -z "$SSH_PRIVSEP_USER" ]
+then
+	SSH_PRIVSEP_USER=sshd
+fi
+
+## Extract common info requires for the 'info' part of the package.
+VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'`
+
+ARCH=`uname -m`
+DEF_MSG="\n"
+OS_VER=`uname -v`
+SCRIPT_SHELL=/sbin/sh
+UNAME_R=`uname -r`
+UNAME_S=`uname -s`
+case ${UNAME_S} in
+	SunOS)	UNAME_S=Solaris
+		OS_VER=${UNAME_R}
+		ARCH=`uname -p`
+		RCS_D=yes
+		DEF_MSG="(default: n)"
+		;;
+	SCO_SV)	case ${UNAME_R} in
+			3.2)	UNAME_S=OpenServer5
+		OS_VER=`uname -X | grep Release | sed -e 's/^Rel.*3.2v//'`
+				;;
+			5)	UNAME_S=OpenServer6
+				;;
+		esac
+		SCRIPT_SHELL=/bin/sh
+		RC1_D=no
+		DEF_MSG="(default: n)"
+		;;
+esac
+
+case `basename $0` in
+	buildpkg.sh)
+## Start by faking root install
+echo "Faking root install..."
+[ -d $FAKE_ROOT ]  &&  rm -fr $FAKE_ROOT
+mkdir $FAKE_ROOT
+${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
+if [ $? -gt 0 ]
+then
+	echo "Fake root install failed, stopping."
+	exit 1
+fi
+
+## Setup our run level stuff while we are at it.
+if [ $DO_SMF -eq 1 ]
+then
+	# For Solaris' SMF, /lib/svc/method/site is the preferred place
+	# for start/stop scripts that aren't supplied with the OS, and
+	# similarly /var/svc/manifest/site for manifests.
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+
+	cat ${OPENSSH_MANIFEST} | \
+	    sed -e "s|__SYSVINIT_NAME__|${SYSVINIT_NAME}|" \
+	    -e "s|__SMF_METHOD_DIR__|${SMF_METHOD_DIR}|" \
+	    > $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+	chmod 644 $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+fi
+
+[ "${PERMIT_ROOT_LOGIN}" = no ]  &&  \
+	perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+[ "${X11_FORWARDING}" = yes ]  &&  \
+	perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+# fix PrintMotd
+perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
+	$FAKE_ROOT${sysconfdir}/sshd_config
+
+# We don't want to overwrite config files on multiple installs
+mv $FAKE_ROOT${sysconfdir}/ssh_config $FAKE_ROOT${sysconfdir}/ssh_config.default
+mv $FAKE_ROOT${sysconfdir}/sshd_config $FAKE_ROOT${sysconfdir}/sshd_config.default
+
+# local tweeks here
+[ -s "${POST_MAKE_INSTALL_FIXES}" ]  &&  . ${POST_MAKE_INSTALL_FIXES}
+
+cd $FAKE_ROOT
+
+## Ok, this is outright wrong, but it will work.  I'm tired of pkgmk
+## whining.
+for i in *; do
+  PROTO_ARGS="$PROTO_ARGS $i=/$i";
+done
+
+## Build info file
+echo "Building pkginfo file..."
+cat > pkginfo << _EOF
+PKG=$PKGNAME
+NAME="OpenSSH Portable for ${UNAME_S}"
+DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
+VENDOR="OpenSSH Portable Team - https://www.openssh.com/portable.html"
+ARCH=$ARCH
+VERSION=$VERSION$REV
+CATEGORY="Security,application"
+BASEDIR=/
+CLASSES="none"
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+
+## Build empty depend file that may get updated by $POST_PROTOTYPE_EDITS
+echo "Building depend file..."
+touch depend
+
+## Build space file
+echo "Building space file..."
+if [ $DO_SMF -eq 1 ]
+then
+	# XXX Is this necessary?  If not, remove space line from mk-proto.awk.
+	touch space
+else
+	cat > space << _EOF
+# extra space required by start/stop links added by installf
+# in postinstall
+$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1
+$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME} 0 1
+_EOF
+	[ "$RC1_D" = no ]  ||  \
+	echo "$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+	[ "$RCS_D" = yes ]  &&  \
+	echo "$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+fi
+
+## Build preinstall file
+echo "Building preinstall file..."
+cat > preinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+_EOF
+
+# local preinstall changes here
+[ -s "${PKG_PREINSTALL_LOCAL}" ]  &&  . ${PKG_PREINSTALL_LOCAL}
+
+cat >> preinstall << _EOF
+#
+if [ "\${PRE_INS_STOP}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm disable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+	fi
+fi
+
+exit 0
+_EOF
+
+## Build postinstall file
+echo "Building postinstall file..."
+cat > postinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
+
+# make rc?.d dirs only if we are doing a test install
+[ -n "${TEST_DIR}" ]  &&  [ $DO_SMF -ne 1 ] && {
+	[ "$RCS_D" = yes ]  &&  mkdir -p ${TEST_DIR}/etc/rcS.d
+	mkdir -p ${TEST_DIR}/etc/rc0.d
+	[ "$RC1_D" = no ]  ||  mkdir -p ${TEST_DIR}/etc/rc1.d
+	mkdir -p ${TEST_DIR}/etc/rc2.d
+}
+
+if [ $DO_SMF -eq 1 ]
+then
+	# Delete the existing service, if it exists, then import the
+	# new one.
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+	# NOTE, The manifest disables sshd by default.
+	svccfg import ${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	if [ "\${USE_SYM_LINKS}" = yes ]
+	then
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+	else
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+	fi
+fi
+
+# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
+[ -d $piddir ]  ||  installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 0755 root sys
+
+_EOF
+
+# local postinstall changes here
+[ -s "${PKG_POSTINSTALL_LOCAL}" ]  &&  . ${PKG_POSTINSTALL_LOCAL}
+
+cat >> postinstall << _EOF
+installf -f ${PKGNAME}
+
+# Use chroot to handle PKG_INSTALL_ROOT
+if [ ! -z "\${PKG_INSTALL_ROOT}" ]
+then
+	chroot="chroot \${PKG_INSTALL_ROOT}"
+fi
+# If this is a test build, we will skip the groupadd/useradd/passwd commands
+if [ ! -z "${TEST_DIR}" ]
+then
+	chroot=echo
+fi
+
+	echo "PrivilegeSeparation user always required."
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
+	then
+		echo "PrivSep user $SSH_PRIVSEP_USER already exists."
+		SSH_PRIVSEP_GROUP=\`grep "^$SSH_PRIVSEP_USER:" \${PKG_INSTALL_ROOT}/etc/passwd | awk -F: '{print \$4}'\`
+		SSH_PRIVSEP_GROUP=\`grep ":\$SSH_PRIVSEP_GROUP:" \${PKG_INSTALL_ROOT}/etc/group | awk -F: '{print \$1}'\`
+	else
+		DO_PASSWD=yes
+	fi
+	[ -z "\$SSH_PRIVSEP_GROUP" ]  &&  SSH_PRIVSEP_GROUP=$SSH_PRIVSEP_USER
+
+	# group required?
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'\$SSH_PRIVSEP_GROUP'\$' >/dev/null
+	then
+		echo "PrivSep group \$SSH_PRIVSEP_GROUP already exists."
+	else
+		DO_GROUP=yes
+	fi
+
+	# create group if required
+	[ "\$DO_GROUP" = yes ]  &&  {
+		# Use gid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
+		then
+			:
+		else
+			sshdgid="-g $SSHDGID"
+		fi
+		echo "Creating PrivSep group \$SSH_PRIVSEP_GROUP."
+		\$chroot ${PATH_GROUPADD_PROG} \$sshdgid \$SSH_PRIVSEP_GROUP
+	}
+
+	# Create user if required
+	[ "\$DO_PASSWD" = yes ]  &&  {
+		# Use uid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDUID'\$' >/dev/null
+		then
+			:
+		else
+			sshduid="-u $SSHDUID"
+		fi
+		echo "Creating PrivSep user $SSH_PRIVSEP_USER."
+		\$chroot ${PATH_USERADD_PROG} -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
+		\$chroot ${PATH_PASSWD_PROG} -l $SSH_PRIVSEP_USER
+	}
+
+if [ "\${POST_INS_START}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm enable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
+	fi
+fi
+exit 0
+_EOF
+
+## Build preremove file
+echo "Building preremove file..."
+cat > preremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	svcadm disable $OPENSSH_FMRI
+else
+	${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+fi
+_EOF
+
+# local preremove changes here
+[ -s "${PKG_PREREMOVE_LOCAL}" ]  &&  . ${PKG_PREREMOVE_LOCAL}
+
+cat >> preremove << _EOF
+exit 0
+_EOF
+
+## Build postremove file
+echo "Building postremove file..."
+cat > postremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+fi
+_EOF
+
+# local postremove changes here
+[ -s "${PKG_POSTREMOVE_LOCAL}" ]  &&  . ${PKG_POSTREMOVE_LOCAL}
+
+cat >> postremove << _EOF
+exit 0
+_EOF
+
+## Build request file
+echo "Building request file..."
+cat > request << _EOF
+trap 'exit 3' 15
+
+_EOF
+
+[ -x /usr/bin/ckyorn ]  ||  cat >> request << _EOF
+
+ckyorn() {
+# for some strange reason OpenServer5 has no ckyorn
+# We build a striped down version here
+
+DEFAULT=n
+PROMPT="Yes or No [yes,no,?,quit]"
+HELP_PROMPT="        Enter y or yes if your answer is yes; n or no if your answer is no."
+USAGE="usage: ckyorn [options]
+where options may include:
+        -d default
+        -h help
+        -p prompt
+"
+
+if [ \$# != 0 ]
+then
+	while getopts d:p:h: c
+	do
+		case \$c in
+			h)	HELP_PROMPT="\$OPTARG" ;;
+			d)	DEFAULT=\$OPTARG ;;
+			p)	PROMPT=\$OPTARG ;;
+			\\?)	echo "\$USAGE" 1>&2
+				exit 1 ;;
+		esac
+	done
+	shift \`expr \$OPTIND - 1\`
+fi
+
+while true
+do
+	echo "\${PROMPT}\\c " 1>&2
+	read key
+	[ -z "\$key" ]  &&  key=\$DEFAULT
+	case \$key in
+		[n,N]|[n,N][o,O]|[y,Y]|[y,Y][e,E][s,S])	echo "\${key}\\c"
+			exit 0 ;;
+		\\?)	echo \$HELP_PROMPT 1>&2 ;;
+		q|quit)	echo "q\\c" 1>&2
+			exit 3 ;;
+	esac
+done
+
+}
+
+_EOF
+
+if [ $DO_SMF -eq 1 ]
+then
+	# This could get hairy, as the running sshd may not be under SMF.
+	# We'll assume an earlier version of OpenSSH started via SMF.
+	cat >> request << _EOF
+PRE_INS_STOP=no
+POST_INS_START=no
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  ] && \\
+    /usr/bin/svcs -H $OPENSSH_FMRI 2>&1 | egrep "^online" > /dev/null 2>&1
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+else
+	cat >> request << _EOF
+USE_SYM_LINKS=no
+PRE_INS_STOP=no
+POST_INS_START=no
+# Use symbolic links?
+ans=\`ckyorn -d n \\
+-p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$?
+case \$ans in
+	[y,Y]*)	USE_SYM_LINKS=yes ;;
+esac
+
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  -a  -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+USE_SYM_LINKS='\$USE_SYM_LINKS'
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+fi
+
+# local request changes here
+[ -s "${PKG_REQUEST_LOCAL}" ]  &&  . ${PKG_REQUEST_LOCAL}
+
+cat >> request << _EOF
+exit 0
+
+_EOF
+
+## Next Build our prototype
+echo "Building prototype file..."
+cat >mk-proto.awk << _EOF
+	    BEGIN { print "i pkginfo"; print "i depend"; \\
+		    print "i preinstall"; print "i postinstall"; \\
+ 		    print "i preremove"; print "i postremove"; \\
+		    print "i request"; print "i space"; \\
+		    split("$SYSTEM_DIR",sys_files); }
+	    {
+	     for (dir in sys_files) { if ( \$3 != sys_files[dir] )
+		     { if ( \$1 == "s" )
+			{ \$5=""; \$6=""; }
+		     else
+			{ \$5="root"; \$6="sys"; }
+		     }
+		else
+		     { \$4="?"; \$5="?"; \$6="?"; break;}
+	    } }
+	    { print; }
+_EOF
+
+find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \
+	pkgproto $PROTO_ARGS | ${AWK} -f mk-proto.awk > prototype
+
+# /usr/local is a symlink on some systems
+[ "${USR_LOCAL_IS_SYMLINK}" = yes ]  &&  {
+	grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
+	mv prototype.new prototype
+}
+
+## Step back a directory and now build the package.
+cd ..
+# local prototype tweeks here
+[ -s "${POST_PROTOTYPE_EDITS}" ]  &&  . ${POST_PROTOTYPE_EDITS}
+
+echo "Building package.."
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+	justpkg.sh)
+rm -fr ${FAKE_ROOT}/${PKGNAME}
+grep -v "^PSTAMP=" $FAKE_ROOT/pkginfo > $$tmp
+mv $$tmp $FAKE_ROOT/pkginfo
+cat >> $FAKE_ROOT/pkginfo << _EOF
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+esac
+
+[ "${REMOVE_FAKE_ROOT_WHEN_DONE}" = yes ]  &&  rm -rf $FAKE_ROOT
+exit 0
+
--- a/config.h.in~	1970-01-01 04:00:00.000000000 +0400
+++ b/config.h.in~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,2107 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
+/* Define if you have a getaddrinfo that fails for the all-zeros IPv6 address
+   */
+#undef AIX_GETNAMEINFO_HACK
+
+/* Define if your AIX loginfailed() function takes 4 arguments (AIX >= 5.2) */
+#undef AIX_LOGINFAILED_4ARG
+
+/* System only supports IPv4 audit records */
+#undef AU_IPv4
+
+/* Define if your resolver libs need this for getrrsetbyname */
+#undef BIND_8_COMPAT
+
+/* The system has incomplete BSM API */
+#undef BROKEN_BSM_API
+
+/* broken in chroots on older kernels */
+#undef BROKEN_CLOSEFROM
+
+/* Define if cmsg_type is not passed correctly */
+#undef BROKEN_CMSG_TYPE
+
+/* getaddrinfo is broken (if present) */
+#undef BROKEN_GETADDRINFO
+
+/* getgroups(0,NULL) will return -1 */
+#undef BROKEN_GETGROUPS
+
+/* getline is not what we expect */
+#undef BROKEN_GETLINE
+
+/* Do not use system glob */
+#undef BROKEN_GLOB
+
+/* Define if you system's inet_ntoa is busted (e.g. Irix gcc issue) */
+#undef BROKEN_INET_NTOA
+
+/* Define if your struct dirent expects you to allocate extra space for d_name
+   */
+#undef BROKEN_ONE_BYTE_DIRENT_D_NAME
+
+/* System poll(2) implementation is broken */
+#undef BROKEN_POLL
+
+/* Can't do comparisons on readv */
+#undef BROKEN_READV_COMPARISON
+
+/* NetBSD read function is sometimes redirected, breaking atomicio comparisons
+   against it */
+#undef BROKEN_READ_COMPARISON
+
+/* Needed for NeXT */
+#undef BROKEN_SAVED_UIDS
+
+/* Define if your setregid() is broken */
+#undef BROKEN_SETREGID
+
+/* Define if your setresgid() is broken */
+#undef BROKEN_SETRESGID
+
+/* Define if your setresuid() is broken */
+#undef BROKEN_SETRESUID
+
+/* Define if your setreuid() is broken */
+#undef BROKEN_SETREUID
+
+/* LynxOS has broken setvbuf() implementation */
+#undef BROKEN_SETVBUF
+
+/* QNX shadow support is broken */
+#undef BROKEN_SHADOW_EXPIRE
+
+/* Define if your snprintf is busted */
+#undef BROKEN_SNPRINTF
+
+/* strndup broken, see APAR IY61211 */
+#undef BROKEN_STRNDUP
+
+/* strnlen broken, see APAR IY62551 */
+#undef BROKEN_STRNLEN
+
+/* strnvis detected broken */
+#undef BROKEN_STRNVIS
+
+/* tcgetattr with ICANON may hang */
+#undef BROKEN_TCGETATTR_ICANON
+
+/* updwtmpx is broken (if present) */
+#undef BROKEN_UPDWTMPX
+
+/* Define if you have BSD auth support */
+#undef BSD_AUTH
+
+/* Define if you want to specify the path to your lastlog file */
+#undef CONF_LASTLOG_FILE
+
+/* Define if you want to specify the path to your utmp file */
+#undef CONF_UTMP_FILE
+
+/* Define if you want to specify the path to your wtmpx file */
+#undef CONF_WTMPX_FILE
+
+/* Define if you want to specify the path to your wtmp file */
+#undef CONF_WTMP_FILE
+
+/* Need to call setpgrp as root */
+#undef DISABLE_FD_PASSING
+
+/* Define if you don't want to use lastlog */
+#undef DISABLE_LASTLOG
+
+/* Define if you don't want to use your system's login() call */
+#undef DISABLE_LOGIN
+
+/* Define if you don't want to use pututline() etc. to write [uw]tmp */
+#undef DISABLE_PUTUTLINE
+
+/* Define if you don't want to use pututxline() etc. to write [uw]tmpx */
+#undef DISABLE_PUTUTXLINE
+
+/* Define if you want to disable shadow passwords */
+#undef DISABLE_SHADOW
+
+/* Define if you don't want to use utmp */
+#undef DISABLE_UTMP
+
+/* Define if you don't want to use utmpx */
+#undef DISABLE_UTMPX
+
+/* Define if you don't want to use wtmp */
+#undef DISABLE_WTMP
+
+/* Define if you don't want to use wtmpx */
+#undef DISABLE_WTMPX
+
+/* Enable for PKCS#11 support */
+#undef ENABLE_PKCS11
+
+/* Enable for U2F/FIDO support */
+#undef ENABLE_SK
+
+/* Enable for built-in U2F/FIDO support */
+#undef ENABLE_SK_INTERNAL
+
+/* define if fflush(NULL) does not work */
+#undef FFLUSH_NULL_BUG
+
+/* File names may not contain backslash characters */
+#undef FILESYSTEM_NO_BACKSLASH
+
+/* fsid_t has member val */
+#undef FSID_HAS_VAL
+
+/* fsid_t has member __val */
+#undef FSID_HAS___VAL
+
+/* getpgrp takes one arg */
+#undef GETPGRP_VOID
+
+/* Conflicting defs for getspnam */
+#undef GETSPNAM_CONFLICTING_DEFS
+
+/* Define if your system glob() function has the GLOB_ALTDIRFUNC extension */
+#undef GLOB_HAS_ALTDIRFUNC
+
+/* Define if your system glob() function has gl_matchc options in glob_t */
+#undef GLOB_HAS_GL_MATCHC
+
+/* Define if your system glob() function has gl_statv options in glob_t */
+#undef GLOB_HAS_GL_STATV
+
+/* Define this if you want GSSAPI support in the version 2 protocol */
+#undef GSSAPI
+
+/* Define if you want to use shadow password expire field */
+#undef HAS_SHADOW_EXPIRE
+
+/* Define if your system uses access rights style file descriptor passing */
+#undef HAVE_ACCRIGHTS_IN_MSGHDR
+
+/* Define if you have ut_addr in utmp.h */
+#undef HAVE_ADDR_IN_UTMP
+
+/* Define if you have ut_addr in utmpx.h */
+#undef HAVE_ADDR_IN_UTMPX
+
+/* Define if you have ut_addr_v6 in utmp.h */
+#undef HAVE_ADDR_V6_IN_UTMP
+
+/* Define if you have ut_addr_v6 in utmpx.h */
+#undef HAVE_ADDR_V6_IN_UTMPX
+
+/* Define to 1 if you have the `arc4random' function. */
+#undef HAVE_ARC4RANDOM
+
+/* Define to 1 if you have the `arc4random_buf' function. */
+#undef HAVE_ARC4RANDOM_BUF
+
+/* Define to 1 if you have the `arc4random_stir' function. */
+#undef HAVE_ARC4RANDOM_STIR
+
+/* Define to 1 if you have the `arc4random_uniform' function. */
+#undef HAVE_ARC4RANDOM_UNIFORM
+
+/* Define to 1 if you have the `asprintf' function. */
+#undef HAVE_ASPRINTF
+
+/* OpenBSD's gcc has bounded */
+#undef HAVE_ATTRIBUTE__BOUNDED__
+
+/* Have attribute nonnull */
+#undef HAVE_ATTRIBUTE__NONNULL__
+
+/* compiler supports nonstring attribute */
+#undef HAVE_ATTRIBUTE__NONSTRING__
+
+/* OpenBSD's gcc has sentinel */
+#undef HAVE_ATTRIBUTE__SENTINEL__
+
+/* Define to 1 if you have the `aug_get_machine' function. */
+#undef HAVE_AUG_GET_MACHINE
+
+/* Define to 1 if you have the `auth_hostok' function. */
+#undef HAVE_AUTH_HOSTOK
+
+/* Define to 1 if you have the `auth_timeok' function. */
+#undef HAVE_AUTH_TIMEOK
+
+/* Define to 1 if you have the `b64_ntop' function. */
+#undef HAVE_B64_NTOP
+
+/* Define to 1 if you have the `b64_pton' function. */
+#undef HAVE_B64_PTON
+
+/* Define if you have the basename function. */
+#undef HAVE_BASENAME
+
+/* Define to 1 if you have the `bcopy' function. */
+#undef HAVE_BCOPY
+
+/* Define to 1 if you have the `bcrypt_pbkdf' function. */
+#undef HAVE_BCRYPT_PBKDF
+
+/* Define to 1 if you have the `bindresvport_sa' function. */
+#undef HAVE_BINDRESVPORT_SA
+
+/* Define to 1 if you have the `blf_enc' function. */
+#undef HAVE_BLF_ENC
+
+/* Define to 1 if you have the <blf.h> header file. */
+#undef HAVE_BLF_H
+
+/* Define to 1 if you have the `Blowfish_expand0state' function. */
+#undef HAVE_BLOWFISH_EXPAND0STATE
+
+/* Define to 1 if you have the `Blowfish_expandstate' function. */
+#undef HAVE_BLOWFISH_EXPANDSTATE
+
+/* Define to 1 if you have the `Blowfish_initstate' function. */
+#undef HAVE_BLOWFISH_INITSTATE
+
+/* Define to 1 if you have the `Blowfish_stream2word' function. */
+#undef HAVE_BLOWFISH_STREAM2WORD
+
+/* Define to 1 if you have the `BN_is_prime_ex' function. */
+#undef HAVE_BN_IS_PRIME_EX
+
+/* Define to 1 if you have the <bsd/libutil.h> header file. */
+#undef HAVE_BSD_LIBUTIL_H
+
+/* Define to 1 if you have the <bsm/audit.h> header file. */
+#undef HAVE_BSM_AUDIT_H
+
+/* Define to 1 if you have the <bstring.h> header file. */
+#undef HAVE_BSTRING_H
+
+/* Define to 1 if you have the `bzero' function. */
+#undef HAVE_BZERO
+
+/* calloc(0, x) returns NULL */
+#undef HAVE_CALLOC
+
+/* Define if you have caph_cache_tzdata */
+#undef HAVE_CAPH_CACHE_TZDATA
+
+/* Define to 1 if you have the <capsicum_helpers.h> header file. */
+#undef HAVE_CAPSICUM_HELPERS_H
+
+/* Define to 1 if you have the `cap_rights_limit' function. */
+#undef HAVE_CAP_RIGHTS_LIMIT
+
+/* Define to 1 if you have the `clock' function. */
+#undef HAVE_CLOCK
+
+/* Have clock_gettime */
+#undef HAVE_CLOCK_GETTIME
+
+/* define if you have clock_t data type */
+#undef HAVE_CLOCK_T
+
+/* Define to 1 if you have the `closefrom' function. */
+#undef HAVE_CLOSEFROM
+
+/* Define to 1 if you have the `close_range' function. */
+#undef HAVE_CLOSE_RANGE
+
+/* Define if gai_strerror() returns const char * */
+#undef HAVE_CONST_GAI_STRERROR_PROTO
+
+/* Define if your system uses ancillary data style file descriptor passing */
+#undef HAVE_CONTROL_IN_MSGHDR
+
+/* Define to 1 if you have the `crypt' function. */
+#undef HAVE_CRYPT
+
+/* Define to 1 if you have the <crypto/sha2.h> header file. */
+#undef HAVE_CRYPTO_SHA2_H
+
+/* Define to 1 if you have the <crypt.h> header file. */
+#undef HAVE_CRYPT_H
+
+/* Define if you are on Cygwin */
+#undef HAVE_CYGWIN
+
+/* Define if your libraries define daemon() */
+#undef HAVE_DAEMON
+
+/* Define to 1 if you have the declaration of `AI_NUMERICSERV', and to 0 if
+   you don't. */
+#undef HAVE_DECL_AI_NUMERICSERV
+
+/* Define to 1 if you have the declaration of `authenticate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_AUTHENTICATE
+
+/* Define to 1 if you have the declaration of `bzero', and to 0 if you don't.
+   */
+#undef HAVE_DECL_BZERO
+
+/* Define to 1 if you have the declaration of `ftruncate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_FTRUNCATE
+
+/* Define to 1 if you have the declaration of `getentropy', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETENTROPY
+
+/* Define to 1 if you have the declaration of `getpeereid', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETPEEREID
+
+/* Define to 1 if you have the declaration of `GLOB_NOMATCH', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GLOB_NOMATCH
+
+/* Define to 1 if you have the declaration of `GSS_C_NT_HOSTBASED_SERVICE',
+   and to 0 if you don't. */
+#undef HAVE_DECL_GSS_C_NT_HOSTBASED_SERVICE
+
+/* Define to 1 if you have the declaration of `howmany', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HOWMANY
+
+/* Define to 1 if you have the declaration of `htole64', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HTOLE64
+
+/* Define to 1 if you have the declaration of `h_errno', and to 0 if you
+   don't. */
+#undef HAVE_DECL_H_ERRNO
+
+/* Define to 1 if you have the declaration of `INFINITY', and to 0 if you
+   don't. */
+#undef HAVE_DECL_INFINITY
+
+/* Define to 1 if you have the declaration of `le32toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE32TOH
+
+/* Define to 1 if you have the declaration of `le64toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE64TOH
+
+/* Define to 1 if you have the declaration of `loginfailed', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINFAILED
+
+/* Define to 1 if you have the declaration of `loginrestrictions', and to 0 if
+   you don't. */
+#undef HAVE_DECL_LOGINRESTRICTIONS
+
+/* Define to 1 if you have the declaration of `loginsuccess', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINSUCCESS
+
+/* Define to 1 if you have the declaration of `MAXSYMLINKS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_MAXSYMLINKS
+
+/* Define to 1 if you have the declaration of `memmem', and to 0 if you don't.
+   */
+#undef HAVE_DECL_MEMMEM
+
+/* Define to 1 if you have the declaration of `NFDBITS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_NFDBITS
+
+/* Define to 1 if you have the declaration of `offsetof', and to 0 if you
+   don't. */
+#undef HAVE_DECL_OFFSETOF
+
+/* Define to 1 if you have the declaration of `O_NONBLOCK', and to 0 if you
+   don't. */
+#undef HAVE_DECL_O_NONBLOCK
+
+/* Define to 1 if you have the declaration of `passwdexpired', and to 0 if you
+   don't. */
+#undef HAVE_DECL_PASSWDEXPIRED
+
+/* Define to 1 if you have the declaration of `readv', and to 0 if you don't.
+   */
+#undef HAVE_DECL_READV
+
+/* Define to 1 if you have the declaration of `setauthdb', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SETAUTHDB
+
+/* Define to 1 if you have the declaration of `SHUT_RD', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SHUT_RD
+
+/* Define to 1 if you have the declaration of `UINT32_MAX', and to 0 if you
+   don't. */
+#undef HAVE_DECL_UINT32_MAX
+
+/* Define to 1 if you have the declaration of `writev', and to 0 if you don't.
+   */
+#undef HAVE_DECL_WRITEV
+
+/* Define to 1 if you have the declaration of `_getlong', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETLONG
+
+/* Define to 1 if you have the declaration of `_getshort', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETSHORT
+
+/* Define to 1 if you have the declaration of `__builtin_inff', and to 0 if
+   you don't. */
+#undef HAVE_DECL___BUILTIN_INFF
+
+/* Define to 1 if you have the `DES_crypt' function. */
+#undef HAVE_DES_CRYPT
+
+/* Define if you have /dev/ptmx */
+#undef HAVE_DEV_PTMX
+
+/* Define if you have /dev/ptc */
+#undef HAVE_DEV_PTS_AND_PTC
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the `dirfd' function. */
+#undef HAVE_DIRFD
+
+/* Define to 1 if you have the `dirname' function. */
+#undef HAVE_DIRNAME
+
+/* Define to 1 if you have the `dlopen' function. */
+#undef HAVE_DLOPEN
+
+/* Define to 1 if you have the `EC_KEY_METHOD_new' function. */
+#undef HAVE_EC_KEY_METHOD_NEW
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates' function. */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates' function. */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the <elf.h> header file. */
+#undef HAVE_ELF_H
+
+/* Define to 1 if you have the `endgrent' function. */
+#undef HAVE_ENDGRENT
+
+/* Define to 1 if you have the <endian.h> header file. */
+#undef HAVE_ENDIAN_H
+
+/* Define to 1 if you have the `endutent' function. */
+#undef HAVE_ENDUTENT
+
+/* Define to 1 if you have the `endutxent' function. */
+#undef HAVE_ENDUTXENT
+
+/* Define to 1 if you have the `err' function. */
+#undef HAVE_ERR
+
+/* Define to 1 if you have the `errx' function. */
+#undef HAVE_ERRX
+
+/* Define to 1 if you have the <err.h> header file. */
+#undef HAVE_ERR_H
+
+/* Define if your system has /etc/default/login */
+#undef HAVE_ETC_DEFAULT_LOGIN
+
+/* Define to 1 if you have the `EVP_chacha20' function. */
+#undef HAVE_EVP_CHACHA20
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_updated_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_UPDATED_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv_noconst' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV_NOCONST
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_set_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_SET_IV
+
+/* Define to 1 if you have the `EVP_DigestFinal_ex' function. */
+#undef HAVE_EVP_DIGESTFINAL_EX
+
+/* Define to 1 if you have the `EVP_DigestInit_ex' function. */
+#undef HAVE_EVP_DIGESTINIT_EX
+
+/* Define to 1 if you have the `EVP_DigestSign' function. */
+#undef HAVE_EVP_DIGESTSIGN
+
+/* Define to 1 if you have the `EVP_DigestVerify' function. */
+#undef HAVE_EVP_DIGESTVERIFY
+
+/* Define to 1 if you have the `EVP_MD_CTX_cleanup' function. */
+#undef HAVE_EVP_MD_CTX_CLEANUP
+
+/* Define to 1 if you have the `EVP_MD_CTX_copy_ex' function. */
+#undef HAVE_EVP_MD_CTX_COPY_EX
+
+/* Define to 1 if you have the `EVP_MD_CTX_init' function. */
+#undef HAVE_EVP_MD_CTX_INIT
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_private_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PRIVATE_KEY
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_public_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PUBLIC_KEY
+
+/* Define to 1 if you have the `EVP_sha256' function. */
+#undef HAVE_EVP_SHA256
+
+/* Define to 1 if you have the `EVP_sha384' function. */
+#undef HAVE_EVP_SHA384
+
+/* Define to 1 if you have the `EVP_sha512' function. */
+#undef HAVE_EVP_SHA512
+
+/* Define if you have ut_exit in utmp.h */
+#undef HAVE_EXIT_IN_UTMP
+
+/* Define to 1 if you have the `explicit_bzero' function. */
+#undef HAVE_EXPLICIT_BZERO
+
+/* Define to 1 if you have the `explicit_memset' function. */
+#undef HAVE_EXPLICIT_MEMSET
+
+/* Define to 1 if you have the `fchmod' function. */
+#undef HAVE_FCHMOD
+
+/* Define to 1 if you have the `fchmodat' function. */
+#undef HAVE_FCHMODAT
+
+/* Define to 1 if you have the `fchown' function. */
+#undef HAVE_FCHOWN
+
+/* Define to 1 if you have the `fchownat' function. */
+#undef HAVE_FCHOWNAT
+
+/* Use F_CLOSEM fcntl for closefrom */
+#undef HAVE_FCNTL_CLOSEM
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if the system has the type `fd_mask'. */
+#undef HAVE_FD_MASK
+
+/* Define to 1 if you have the <features.h> header file. */
+#undef HAVE_FEATURES_H
+
+/* Define to 1 if you have the `fido_assert_set_clientdata' function. */
+#undef HAVE_FIDO_ASSERT_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_prot' function. */
+#undef HAVE_FIDO_CRED_PROT
+
+/* Define to 1 if you have the `fido_cred_set_clientdata' function. */
+#undef HAVE_FIDO_CRED_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_set_prot' function. */
+#undef HAVE_FIDO_CRED_SET_PROT
+
+/* Define to 1 if you have the `fido_dev_get_touch_begin' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_BEGIN
+
+/* Define to 1 if you have the `fido_dev_get_touch_status' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_STATUS
+
+/* Define to 1 if you have the `fido_dev_is_winhello' function. */
+#undef HAVE_FIDO_DEV_IS_WINHELLO
+
+/* Define to 1 if you have the `fido_dev_supports_cred_prot' function. */
+#undef HAVE_FIDO_DEV_SUPPORTS_CRED_PROT
+
+/* Define to 1 if you have the <floatingpoint.h> header file. */
+#undef HAVE_FLOATINGPOINT_H
+
+/* Define to 1 if you have the `flock' function. */
+#undef HAVE_FLOCK
+
+/* Define to 1 if you have the `fmt_scaled' function. */
+#undef HAVE_FMT_SCALED
+
+/* Define to 1 if you have the `fnmatch' function. */
+#undef HAVE_FNMATCH
+
+/* Define to 1 if you have the <fnmatch.h> header file. */
+#undef HAVE_FNMATCH_H
+
+/* Define to 1 if you have the `freeaddrinfo' function. */
+#undef HAVE_FREEADDRINFO
+
+/* Define to 1 if you have the `freezero' function. */
+#undef HAVE_FREEZERO
+
+/* Define to 1 if the system has the type `fsblkcnt_t'. */
+#undef HAVE_FSBLKCNT_T
+
+/* Define to 1 if the system has the type `fsfilcnt_t'. */
+#undef HAVE_FSFILCNT_T
+
+/* Define to 1 if you have the `fstatat' function. */
+#undef HAVE_FSTATAT
+
+/* Define to 1 if you have the `fstatfs' function. */
+#undef HAVE_FSTATFS
+
+/* Define to 1 if you have the `fstatvfs' function. */
+#undef HAVE_FSTATVFS
+
+/* Define to 1 if you have the `futimes' function. */
+#undef HAVE_FUTIMES
+
+/* Define to 1 if you have the `gai_strerror' function. */
+#undef HAVE_GAI_STRERROR
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+#undef HAVE_GETADDRINFO
+
+/* Define to 1 if you have the `getaudit' function. */
+#undef HAVE_GETAUDIT
+
+/* Define to 1 if you have the `getaudit_addr' function. */
+#undef HAVE_GETAUDIT_ADDR
+
+/* Define to 1 if you have the `getcwd' function. */
+#undef HAVE_GETCWD
+
+/* Define to 1 if you have the `getentropy' function. */
+#undef HAVE_GETENTROPY
+
+/* Define to 1 if you have the `getgrouplist' function. */
+#undef HAVE_GETGROUPLIST
+
+/* Define to 1 if you have the `getgrset' function. */
+#undef HAVE_GETGRSET
+
+/* Define to 1 if you have the `getlastlogxbyname' function. */
+#undef HAVE_GETLASTLOGXBYNAME
+
+/* Define to 1 if you have the `getline' function. */
+#undef HAVE_GETLINE
+
+/* Define to 1 if you have the `getluid' function. */
+#undef HAVE_GETLUID
+
+/* Define to 1 if you have the `getnameinfo' function. */
+#undef HAVE_GETNAMEINFO
+
+/* Define to 1 if you have the `getopt' function. */
+#undef HAVE_GETOPT
+
+/* Define to 1 if you have the <getopt.h> header file. */
+#undef HAVE_GETOPT_H
+
+/* Define if your getopt(3) defines and uses optreset */
+#undef HAVE_GETOPT_OPTRESET
+
+/* Define if your libraries define getpagesize() */
+#undef HAVE_GETPAGESIZE
+
+/* Define to 1 if you have the `getpeereid' function. */
+#undef HAVE_GETPEEREID
+
+/* Define to 1 if you have the `getpeerucred' function. */
+#undef HAVE_GETPEERUCRED
+
+/* Define to 1 if you have the `getpgid' function. */
+#undef HAVE_GETPGID
+
+/* Define to 1 if you have the `getpgrp' function. */
+#undef HAVE_GETPGRP
+
+/* Define to 1 if you have the `getpwanam' function. */
+#undef HAVE_GETPWANAM
+
+/* Define to 1 if you have the `getrandom' function. */
+#undef HAVE_GETRANDOM
+
+/* Define to 1 if you have the `getrlimit' function. */
+#undef HAVE_GETRLIMIT
+
+/* Define if getrrsetbyname() exists */
+#undef HAVE_GETRRSETBYNAME
+
+/* Define to 1 if you have the `getseuserbyname' function. */
+#undef HAVE_GETSEUSERBYNAME
+
+/* Define to 1 if you have the `getsid' function. */
+#undef HAVE_GETSID
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define to 1 if you have the `getttyent' function. */
+#undef HAVE_GETTTYENT
+
+/* Define to 1 if you have the `getutent' function. */
+#undef HAVE_GETUTENT
+
+/* Define to 1 if you have the `getutid' function. */
+#undef HAVE_GETUTID
+
+/* Define to 1 if you have the `getutline' function. */
+#undef HAVE_GETUTLINE
+
+/* Define to 1 if you have the `getutxent' function. */
+#undef HAVE_GETUTXENT
+
+/* Define to 1 if you have the `getutxid' function. */
+#undef HAVE_GETUTXID
+
+/* Define to 1 if you have the `getutxline' function. */
+#undef HAVE_GETUTXLINE
+
+/* Define to 1 if you have the `getutxuser' function. */
+#undef HAVE_GETUTXUSER
+
+/* Define to 1 if you have the `get_default_context_with_level' function. */
+#undef HAVE_GET_DEFAULT_CONTEXT_WITH_LEVEL
+
+/* Define to 1 if you have the `glob' function. */
+#undef HAVE_GLOB
+
+/* Define to 1 if you have the <glob.h> header file. */
+#undef HAVE_GLOB_H
+
+/* Define to 1 if you have the `group_from_gid' function. */
+#undef HAVE_GROUP_FROM_GID
+
+/* Define to 1 if you have the <gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi/gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_KRB5_H
+
+/* Define to 1 if you have the <gssapi.h> header file. */
+#undef HAVE_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_KRB5_H
+
+/* Define if HEADER.ad exists in arpa/nameser.h */
+#undef HAVE_HEADER_AD
+
+/* Define to 1 if you have the `HMAC_CTX_init' function. */
+#undef HAVE_HMAC_CTX_INIT
+
+/* Define if you have ut_host in utmp.h */
+#undef HAVE_HOST_IN_UTMP
+
+/* Define if you have ut_host in utmpx.h */
+#undef HAVE_HOST_IN_UTMPX
+
+/* Define to 1 if you have the <iaf.h> header file. */
+#undef HAVE_IAF_H
+
+/* Define to 1 if you have the <ia.h> header file. */
+#undef HAVE_IA_H
+
+/* Define if you have ut_id in utmp.h */
+#undef HAVE_ID_IN_UTMP
+
+/* Define if you have ut_id in utmpx.h */
+#undef HAVE_ID_IN_UTMPX
+
+/* Define to 1 if you have the <ifaddrs.h> header file. */
+#undef HAVE_IFADDRS_H
+
+/* Define to 1 if you have the `inet_aton' function. */
+#undef HAVE_INET_ATON
+
+/* Define to 1 if you have the `inet_ntoa' function. */
+#undef HAVE_INET_NTOA
+
+/* Define to 1 if you have the `inet_ntop' function. */
+#undef HAVE_INET_NTOP
+
+/* Define to 1 if you have the `innetgr' function. */
+#undef HAVE_INNETGR
+
+/* define if you have int64_t data type */
+#undef HAVE_INT64_T
+
+/* Define to 1 if the system has the type `intmax_t'. */
+#undef HAVE_INTMAX_T
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* define if you have intxx_t data type */
+#undef HAVE_INTXX_T
+
+/* Define to 1 if the system has the type `in_addr_t'. */
+#undef HAVE_IN_ADDR_T
+
+/* Define to 1 if the system has the type `in_port_t'. */
+#undef HAVE_IN_PORT_T
+
+/* Define if you have isblank(3C). */
+#undef HAVE_ISBLANK
+
+/* Define to 1 if you have the `killpg' function. */
+#undef HAVE_KILLPG
+
+/* Define to 1 if you have the `krb5_cc_new_unique' function. */
+#undef HAVE_KRB5_CC_NEW_UNIQUE
+
+/* Define to 1 if you have the `krb5_free_error_message' function. */
+#undef HAVE_KRB5_FREE_ERROR_MESSAGE
+
+/* Define to 1 if you have the `krb5_get_error_message' function. */
+#undef HAVE_KRB5_GET_ERROR_MESSAGE
+
+/* Define to 1 if you have the <langinfo.h> header file. */
+#undef HAVE_LANGINFO_H
+
+/* Define to 1 if you have the <lastlog.h> header file. */
+#undef HAVE_LASTLOG_H
+
+/* Define if you want ldns support */
+#undef HAVE_LDNS
+
+/* Define to 1 if you have the <libaudit.h> header file. */
+#undef HAVE_LIBAUDIT_H
+
+/* Define to 1 if you have the `bsm' library (-lbsm). */
+#undef HAVE_LIBBSM
+
+/* Define to 1 if you have the `dl' library (-ldl). */
+#undef HAVE_LIBDL
+
+/* Define to 1 if you have the <libgen.h> header file. */
+#undef HAVE_LIBGEN_H
+
+/* Define if system has libiaf that supports set_id */
+#undef HAVE_LIBIAF
+
+/* Define to 1 if you have the `network' library (-lnetwork). */
+#undef HAVE_LIBNETWORK
+
+/* Define to 1 if you have the `pam' library (-lpam). */
+#undef HAVE_LIBPAM
+
+/* Define to 1 if you have the <libproc.h> header file. */
+#undef HAVE_LIBPROC_H
+
+/* Define to 1 if you have the `socket' library (-lsocket). */
+#undef HAVE_LIBSOCKET
+
+/* Define to 1 if you have the <libutil.h> header file. */
+#undef HAVE_LIBUTIL_H
+
+/* Define to 1 if you have the `xnet' library (-lxnet). */
+#undef HAVE_LIBXNET
+
+/* Define to 1 if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <linux/audit.h> header file. */
+#undef HAVE_LINUX_AUDIT_H
+
+/* Define to 1 if you have the <linux/filter.h> header file. */
+#undef HAVE_LINUX_FILTER_H
+
+/* Define to 1 if you have the <linux/if_tun.h> header file. */
+#undef HAVE_LINUX_IF_TUN_H
+
+/* Define to 1 if you have the <linux/seccomp.h> header file. */
+#undef HAVE_LINUX_SECCOMP_H
+
+/* Define to 1 if you have the `llabs' function. */
+#undef HAVE_LLABS
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the `localtime_r' function. */
+#undef HAVE_LOCALTIME_R
+
+/* Define to 1 if you have the `login' function. */
+#undef HAVE_LOGIN
+
+/* Define to 1 if you have the <login_cap.h> header file. */
+#undef HAVE_LOGIN_CAP_H
+
+/* Define to 1 if you have the `login_getcapbool' function. */
+#undef HAVE_LOGIN_GETCAPBOOL
+
+/* Define to 1 if you have the `login_getpwclass' function. */
+#undef HAVE_LOGIN_GETPWCLASS
+
+/* Define to 1 if you have the <login.h> header file. */
+#undef HAVE_LOGIN_H
+
+/* Define to 1 if you have the `logout' function. */
+#undef HAVE_LOGOUT
+
+/* Define to 1 if you have the `logwtmp' function. */
+#undef HAVE_LOGWTMP
+
+/* Define to 1 if the system has the type `long double'. */
+#undef HAVE_LONG_DOUBLE
+
+/* Define to 1 if the system has the type `long long'. */
+#undef HAVE_LONG_LONG
+
+/* Define to 1 if you have the <maillock.h> header file. */
+#undef HAVE_MAILLOCK_H
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+   to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the `mblen' function. */
+#undef HAVE_MBLEN
+
+/* Define to 1 if you have the `mbtowc' function. */
+#undef HAVE_MBTOWC
+
+/* Define to 1 if you have the `memmem' function. */
+#undef HAVE_MEMMEM
+
+/* Define to 1 if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define to 1 if you have the `memset_s' function. */
+#undef HAVE_MEMSET_S
+
+/* Define to 1 if you have the `mkdtemp' function. */
+#undef HAVE_MKDTEMP
+
+/* Define to 1 if you have the `mmap' function. */
+#undef HAVE_MMAP
+
+/* define if you have mode_t data type */
+#undef HAVE_MODE_T
+
+/* Some systems put nanosleep outside of libc */
+#undef HAVE_NANOSLEEP
+
+/* Define to 1 if you have the <ndir.h> header file. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the <netdb.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define to 1 if you have the <netgroup.h> header file. */
+#undef HAVE_NETGROUP_H
+
+/* Define to 1 if you have the <net/if_tun.h> header file. */
+#undef HAVE_NET_IF_TUN_H
+
+/* Define to 1 if you have the <net/route.h> header file. */
+#undef HAVE_NET_ROUTE_H
+
+/* Define if you are on NeXT */
+#undef HAVE_NEXT
+
+/* Define to 1 if the system has the type `nfds_t'. */
+#undef HAVE_NFDS_T
+
+/* Define to 1 if you have the `ngetaddrinfo' function. */
+#undef HAVE_NGETADDRINFO
+
+/* Define to 1 if you have the `nlist' function. */
+#undef HAVE_NLIST
+
+/* Define to 1 if you have the <nlist.h> header file. */
+#undef HAVE_NLIST_H
+
+/* Define to 1 if you have the `nl_langinfo' function. */
+#undef HAVE_NL_LANGINFO
+
+/* Define to 1 if you have the `nsleep' function. */
+#undef HAVE_NSLEEP
+
+/* Define to 1 if you have the `ogetaddrinfo' function. */
+#undef HAVE_OGETADDRINFO
+
+/* Define if you have an old version of PAM which takes only one argument to
+   pam_strerror */
+#undef HAVE_OLD_PAM
+
+/* Define to 1 if you have the `openlog_r' function. */
+#undef HAVE_OPENLOG_R
+
+/* Define to 1 if you have the `openpty' function. */
+#undef HAVE_OPENPTY
+
+/* Define to 1 if you have the `OpenSSL_version' function. */
+#undef HAVE_OPENSSL_VERSION
+
+/* Define to 1 if you have the `OpenSSL_version_num' function. */
+#undef HAVE_OPENSSL_VERSION_NUM
+
+/* Define if you have Digital Unix Security Integration Architecture */
+#undef HAVE_OSF_SIA
+
+/* Define to 1 if you have the `pam_getenvlist' function. */
+#undef HAVE_PAM_GETENVLIST
+
+/* Define to 1 if you have the <pam/pam_appl.h> header file. */
+#undef HAVE_PAM_PAM_APPL_H
+
+/* Define to 1 if you have the `pam_putenv' function. */
+#undef HAVE_PAM_PUTENV
+
+/* Define to 1 if you have the <paths.h> header file. */
+#undef HAVE_PATHS_H
+
+/* Define if you have ut_pid in utmp.h */
+#undef HAVE_PID_IN_UTMP
+
+/* define if you have pid_t data type */
+#undef HAVE_PID_T
+
+/* Define to 1 if you have the `pledge' function. */
+#undef HAVE_PLEDGE
+
+/* Define to 1 if you have the `poll' function. */
+#undef HAVE_POLL
+
+/* Define to 1 if you have the <poll.h> header file. */
+#undef HAVE_POLL_H
+
+/* Define to 1 if you have the `ppoll' function. */
+#undef HAVE_PPOLL
+
+/* Define to 1 if you have the `prctl' function. */
+#undef HAVE_PRCTL
+
+/* Define to 1 if you have the `priv_basicset' function. */
+#undef HAVE_PRIV_BASICSET
+
+/* Define to 1 if you have the <priv.h> header file. */
+#undef HAVE_PRIV_H
+
+/* Define to 1 if you have the `procctl' function. */
+#undef HAVE_PROCCTL
+
+/* Define if you have /proc/$pid/fd */
+#undef HAVE_PROC_PID
+
+/* Define to 1 if you have the `proc_pidinfo' function. */
+#undef HAVE_PROC_PIDINFO
+
+/* Define to 1 if you have the `pselect' function. */
+#undef HAVE_PSELECT
+
+/* Define to 1 if you have the `pstat' function. */
+#undef HAVE_PSTAT
+
+/* Define to 1 if you have the <pty.h> header file. */
+#undef HAVE_PTY_H
+
+/* Define to 1 if you have the `pututline' function. */
+#undef HAVE_PUTUTLINE
+
+/* Define to 1 if you have the `pututxline' function. */
+#undef HAVE_PUTUTXLINE
+
+/* Define to 1 if you have the `raise' function. */
+#undef HAVE_RAISE
+
+/* Define to 1 if you have the `readpassphrase' function. */
+#undef HAVE_READPASSPHRASE
+
+/* Define to 1 if you have the <readpassphrase.h> header file. */
+#undef HAVE_READPASSPHRASE_H
+
+/* Define to 1 if your system has a GNU libc compatible `realloc' function,
+   and to 0 otherwise. */
+#undef HAVE_REALLOC
+
+/* Define to 1 if you have the `reallocarray' function. */
+#undef HAVE_REALLOCARRAY
+
+/* Define to 1 if you have the `realpath' function. */
+#undef HAVE_REALPATH
+
+/* Define to 1 if you have the `recallocarray' function. */
+#undef HAVE_RECALLOCARRAY
+
+/* Define to 1 if you have the `recvmsg' function. */
+#undef HAVE_RECVMSG
+
+/* sys/resource.h has RLIMIT_NPROC */
+#undef HAVE_RLIMIT_NPROC
+
+/* Define to 1 if you have the <rpc/types.h> header file. */
+#undef HAVE_RPC_TYPES_H
+
+/* Define to 1 if you have the `rresvport_af' function. */
+#undef HAVE_RRESVPORT_AF
+
+/* Define to 1 if you have the `RSA_generate_key_ex' function. */
+#undef HAVE_RSA_GENERATE_KEY_EX
+
+/* Define to 1 if you have the `RSA_get_default_method' function. */
+#undef HAVE_RSA_GET_DEFAULT_METHOD
+
+/* Define to 1 if you have the <sandbox.h> header file. */
+#undef HAVE_SANDBOX_H
+
+/* Define to 1 if you have the `sandbox_init' function. */
+#undef HAVE_SANDBOX_INIT
+
+/* define if you have sa_family_t data type */
+#undef HAVE_SA_FAMILY_T
+
+/* Define to 1 if you have the `scan_scaled' function. */
+#undef HAVE_SCAN_SCALED
+
+/* Define if you have SecureWare-based protected password database */
+#undef HAVE_SECUREWARE
+
+/* Define to 1 if you have the <security/pam_appl.h> header file. */
+#undef HAVE_SECURITY_PAM_APPL_H
+
+/* Define to 1 if you have the `sendmsg' function. */
+#undef HAVE_SENDMSG
+
+/* Define to 1 if you have the `setauthdb' function. */
+#undef HAVE_SETAUTHDB
+
+/* Define to 1 if you have the `setdtablesize' function. */
+#undef HAVE_SETDTABLESIZE
+
+/* Define to 1 if you have the `setegid' function. */
+#undef HAVE_SETEGID
+
+/* Define to 1 if you have the `setenv' function. */
+#undef HAVE_SETENV
+
+/* Define to 1 if you have the `seteuid' function. */
+#undef HAVE_SETEUID
+
+/* Define to 1 if you have the `setgroupent' function. */
+#undef HAVE_SETGROUPENT
+
+/* Define to 1 if you have the `setgroups' function. */
+#undef HAVE_SETGROUPS
+
+/* Define to 1 if you have the `setlinebuf' function. */
+#undef HAVE_SETLINEBUF
+
+/* Define to 1 if you have the `setlogin' function. */
+#undef HAVE_SETLOGIN
+
+/* Define to 1 if you have the `setluid' function. */
+#undef HAVE_SETLUID
+
+/* Define to 1 if you have the `setpassent' function. */
+#undef HAVE_SETPASSENT
+
+/* Define to 1 if you have the `setpcred' function. */
+#undef HAVE_SETPCRED
+
+/* Define to 1 if you have the `setpflags' function. */
+#undef HAVE_SETPFLAGS
+
+/* Define to 1 if you have the `setppriv' function. */
+#undef HAVE_SETPPRIV
+
+/* Define to 1 if you have the `setproctitle' function. */
+#undef HAVE_SETPROCTITLE
+
+/* Define to 1 if you have the `setregid' function. */
+#undef HAVE_SETREGID
+
+/* Define to 1 if you have the `setresgid' function. */
+#undef HAVE_SETRESGID
+
+/* Define to 1 if you have the `setresuid' function. */
+#undef HAVE_SETRESUID
+
+/* Define to 1 if you have the `setreuid' function. */
+#undef HAVE_SETREUID
+
+/* Define to 1 if you have the `setrlimit' function. */
+#undef HAVE_SETRLIMIT
+
+/* Define to 1 if you have the `setsid' function. */
+#undef HAVE_SETSID
+
+/* Define to 1 if you have the `setutent' function. */
+#undef HAVE_SETUTENT
+
+/* Define to 1 if you have the `setutxdb' function. */
+#undef HAVE_SETUTXDB
+
+/* Define to 1 if you have the `setutxent' function. */
+#undef HAVE_SETUTXENT
+
+/* Define to 1 if you have the `setvbuf' function. */
+#undef HAVE_SETVBUF
+
+/* Define to 1 if you have the `set_id' function. */
+#undef HAVE_SET_ID
+
+/* Define to 1 if you have the `SHA256Update' function. */
+#undef HAVE_SHA256UPDATE
+
+/* Define to 1 if you have the <sha2.h> header file. */
+#undef HAVE_SHA2_H
+
+/* Define to 1 if you have the `SHA384Update' function. */
+#undef HAVE_SHA384UPDATE
+
+/* Define to 1 if you have the `SHA512Update' function. */
+#undef HAVE_SHA512UPDATE
+
+/* Define to 1 if you have the <shadow.h> header file. */
+#undef HAVE_SHADOW_H
+
+/* Define to 1 if you have the `sigaction' function. */
+#undef HAVE_SIGACTION
+
+/* Define to 1 if the system has the type `sighandler_t'. */
+#undef HAVE_SIGHANDLER_T
+
+/* Define to 1 if you have the `sigvec' function. */
+#undef HAVE_SIGVEC
+
+/* Define to 1 if the system has the type `sig_atomic_t'. */
+#undef HAVE_SIG_ATOMIC_T
+
+/* define if you have size_t data type */
+#undef HAVE_SIZE_T
+
+/* Define to 1 if you have the `snprintf' function. */
+#undef HAVE_SNPRINTF
+
+/* Define to 1 if you have the `socketpair' function. */
+#undef HAVE_SOCKETPAIR
+
+/* Have PEERCRED socket option */
+#undef HAVE_SO_PEERCRED
+
+/* define if you have ssize_t data type */
+#undef HAVE_SSIZE_T
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE_SS_FAMILY_IN_SS
+
+/* Define if you have ut_ss in utmpx.h */
+#undef HAVE_SS_IN_UTMPX
+
+/* Define to 1 if you have the `statfs' function. */
+#undef HAVE_STATFS
+
+/* Define to 1 if you have the `statvfs' function. */
+#undef HAVE_STATVFS
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#undef HAVE_STDIO_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasestr' function. */
+#undef HAVE_STRCASESTR
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the `strftime' function. */
+#undef HAVE_STRFTIME
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcat' function. */
+#undef HAVE_STRLCAT
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if you have the `strmode' function. */
+#undef HAVE_STRMODE
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
+/* Define to 1 if you have the `strnvis' function. */
+#undef HAVE_STRNVIS
+
+/* Define to 1 if you have the `strptime' function. */
+#undef HAVE_STRPTIME
+
+/* Define to 1 if you have the `strsep' function. */
+#undef HAVE_STRSEP
+
+/* Define to 1 if you have the `strsignal' function. */
+#undef HAVE_STRSIGNAL
+
+/* Define to 1 if you have the `strtoll' function. */
+#undef HAVE_STRTOLL
+
+/* Define to 1 if you have the `strtonum' function. */
+#undef HAVE_STRTONUM
+
+/* Define to 1 if you have the `strtoul' function. */
+#undef HAVE_STRTOUL
+
+/* Define to 1 if you have the `strtoull' function. */
+#undef HAVE_STRTOULL
+
+/* define if you have struct addrinfo data type */
+#undef HAVE_STRUCT_ADDRINFO
+
+/* Define to 1 if `d_type' is a member of `struct dirent'. */
+#undef HAVE_STRUCT_DIRENT_D_TYPE
+
+/* define if you have struct in6_addr data type */
+#undef HAVE_STRUCT_IN6_ADDR
+
+/* Define to 1 if `pw_change' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CHANGE
+
+/* Define to 1 if `pw_class' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CLASS
+
+/* Define to 1 if `pw_expire' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_EXPIRE
+
+/* Define to 1 if `pw_gecos' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_GECOS
+
+/* Define to 1 if `fd' is a member of `struct pollfd'. */
+#undef HAVE_STRUCT_POLLFD_FD
+
+/* define if you have struct sockaddr_in6 data type */
+#undef HAVE_STRUCT_SOCKADDR_IN6
+
+/* Define to 1 if `sin6_scope_id' is a member of `struct sockaddr_in6'. */
+#undef HAVE_STRUCT_SOCKADDR_IN6_SIN6_SCOPE_ID
+
+/* define if you have struct sockaddr_storage data type */
+#undef HAVE_STRUCT_SOCKADDR_STORAGE
+
+/* Define to 1 if `f_files' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FILES
+
+/* Define to 1 if `f_flags' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FLAGS
+
+/* Define to 1 if `st_blksize' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_BLKSIZE
+
+/* Define to 1 if `st_mtim' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIM
+
+/* Define to 1 if `st_mtime' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIME
+
+/* define if you have struct timespec */
+#undef HAVE_STRUCT_TIMESPEC
+
+/* define if you have struct timeval */
+#undef HAVE_STRUCT_TIMEVAL
+
+/* Define to 1 if you have the `sysconf' function. */
+#undef HAVE_SYSCONF
+
+/* Define if you have syslen in utmpx.h */
+#undef HAVE_SYSLEN_IN_UTMPX
+
+/* Define to 1 if you have the <sys/audit.h> header file. */
+#undef HAVE_SYS_AUDIT_H
+
+/* Define to 1 if you have the <sys/bitypes.h> header file. */
+#undef HAVE_SYS_BITYPES_H
+
+/* Define to 1 if you have the <sys/bsdtty.h> header file. */
+#undef HAVE_SYS_BSDTTY_H
+
+/* Define to 1 if you have the <sys/byteorder.h> header file. */
+#undef HAVE_SYS_BYTEORDER_H
+
+/* Define to 1 if you have the <sys/capsicum.h> header file. */
+#undef HAVE_SYS_CAPSICUM_H
+
+/* Define to 1 if you have the <sys/cdefs.h> header file. */
+#undef HAVE_SYS_CDEFS_H
+
+/* Define to 1 if you have the <sys/dir.h> header file. */
+#undef HAVE_SYS_DIR_H
+
+/* Define if your system defines sys_errlist[] */
+#undef HAVE_SYS_ERRLIST
+
+/* Define to 1 if you have the <sys/file.h> header file. */
+#undef HAVE_SYS_FILE_H
+
+/* Define to 1 if you have the <sys/label.h> header file. */
+#undef HAVE_SYS_LABEL_H
+
+/* Define to 1 if you have the <sys/mman.h> header file. */
+#undef HAVE_SYS_MMAN_H
+
+/* Define to 1 if you have the <sys/mount.h> header file. */
+#undef HAVE_SYS_MOUNT_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file. */
+#undef HAVE_SYS_NDIR_H
+
+/* Define if your system defines sys_nerr */
+#undef HAVE_SYS_NERR
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/poll.h> header file. */
+#undef HAVE_SYS_POLL_H
+
+/* Define to 1 if you have the <sys/prctl.h> header file. */
+#undef HAVE_SYS_PRCTL_H
+
+/* Define to 1 if you have the <sys/procctl.h> header file. */
+#undef HAVE_SYS_PROCCTL_H
+
+/* Define to 1 if you have the <sys/pstat.h> header file. */
+#undef HAVE_SYS_PSTAT_H
+
+/* Define to 1 if you have the <sys/ptms.h> header file. */
+#undef HAVE_SYS_PTMS_H
+
+/* Define to 1 if you have the <sys/ptrace.h> header file. */
+#undef HAVE_SYS_PTRACE_H
+
+/* Define to 1 if you have the <sys/random.h> header file. */
+#undef HAVE_SYS_RANDOM_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/statvfs.h> header file. */
+#undef HAVE_SYS_STATVFS_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/stream.h> header file. */
+#undef HAVE_SYS_STREAM_H
+
+/* Define to 1 if you have the <sys/stropts.h> header file. */
+#undef HAVE_SYS_STROPTS_H
+
+/* Define to 1 if you have the <sys/strtio.h> header file. */
+#undef HAVE_SYS_STRTIO_H
+
+/* Define to 1 if you have the <sys/sysctl.h> header file. */
+#undef HAVE_SYS_SYSCTL_H
+
+/* Force use of sys/syslog.h on Ultrix */
+#undef HAVE_SYS_SYSLOG_H
+
+/* Define to 1 if you have the <sys/sysmacros.h> header file. */
+#undef HAVE_SYS_SYSMACROS_H
+
+/* Define to 1 if you have the <sys/timers.h> header file. */
+#undef HAVE_SYS_TIMERS_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/un.h> header file. */
+#undef HAVE_SYS_UN_H
+
+/* Define to 1 if you have the <sys/vfs.h> header file. */
+#undef HAVE_SYS_VFS_H
+
+/* Define to 1 if you have the `tcgetpgrp' function. */
+#undef HAVE_TCGETPGRP
+
+/* Define to 1 if you have the `tcsendbreak' function. */
+#undef HAVE_TCSENDBREAK
+
+/* Define to 1 if you have the `time' function. */
+#undef HAVE_TIME
+
+/* Define to 1 if you have the `timegm' function. */
+#undef HAVE_TIMEGM
+
+/* Define to 1 if you have the <time.h> header file. */
+#undef HAVE_TIME_H
+
+/* Define if you have ut_time in utmp.h */
+#undef HAVE_TIME_IN_UTMP
+
+/* Define if you have ut_time in utmpx.h */
+#undef HAVE_TIME_IN_UTMPX
+
+/* Define to 1 if you have the `timingsafe_bcmp' function. */
+#undef HAVE_TIMINGSAFE_BCMP
+
+/* Define to 1 if you have the <tmpdir.h> header file. */
+#undef HAVE_TMPDIR_H
+
+/* Define to 1 if you have the `truncate' function. */
+#undef HAVE_TRUNCATE
+
+/* Define to 1 if you have the <ttyent.h> header file. */
+#undef HAVE_TTYENT_H
+
+/* Define if you have ut_tv in utmp.h */
+#undef HAVE_TV_IN_UTMP
+
+/* Define if you have ut_tv in utmpx.h */
+#undef HAVE_TV_IN_UTMPX
+
+/* Define if you have ut_type in utmp.h */
+#undef HAVE_TYPE_IN_UTMP
+
+/* Define if you have ut_type in utmpx.h */
+#undef HAVE_TYPE_IN_UTMPX
+
+/* Define to 1 if you have the <ucred.h> header file. */
+#undef HAVE_UCRED_H
+
+/* Define to 1 if the system has the type `uintmax_t'. */
+#undef HAVE_UINTMAX_T
+
+/* define if you have uintxx_t data type */
+#undef HAVE_UINTXX_T
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `unlinkat' function. */
+#undef HAVE_UNLINKAT
+
+/* Define to 1 if you have the `unsetenv' function. */
+#undef HAVE_UNSETENV
+
+/* Define to 1 if the system has the type `unsigned long long'. */
+#undef HAVE_UNSIGNED_LONG_LONG
+
+/* Define to 1 if you have the `unveil' function. */
+#undef HAVE_UNVEIL
+
+/* Define to 1 if you have the `updwtmp' function. */
+#undef HAVE_UPDWTMP
+
+/* Define to 1 if you have the `updwtmpx' function. */
+#undef HAVE_UPDWTMPX
+
+/* Define to 1 if you have the <usersec.h> header file. */
+#undef HAVE_USERSEC_H
+
+/* Define to 1 if you have the `user_from_uid' function. */
+#undef HAVE_USER_FROM_UID
+
+/* Define to 1 if you have the `usleep' function. */
+#undef HAVE_USLEEP
+
+/* Define to 1 if you have the <util.h> header file. */
+#undef HAVE_UTIL_H
+
+/* Define to 1 if you have the `utimensat' function. */
+#undef HAVE_UTIMENSAT
+
+/* Define to 1 if you have the `utimes' function. */
+#undef HAVE_UTIMES
+
+/* Define to 1 if you have the <utime.h> header file. */
+#undef HAVE_UTIME_H
+
+/* Define to 1 if you have the `utmpname' function. */
+#undef HAVE_UTMPNAME
+
+/* Define to 1 if you have the `utmpxname' function. */
+#undef HAVE_UTMPXNAME
+
+/* Define to 1 if you have the <utmpx.h> header file. */
+#undef HAVE_UTMPX_H
+
+/* Define to 1 if you have the <utmp.h> header file. */
+#undef HAVE_UTMP_H
+
+/* define if you have u_char data type */
+#undef HAVE_U_CHAR
+
+/* define if you have u_int data type */
+#undef HAVE_U_INT
+
+/* define if you have u_int64_t data type */
+#undef HAVE_U_INT64_T
+
+/* define if you have u_intxx_t data type */
+#undef HAVE_U_INTXX_T
+
+/* Define to 1 if you have the `vasprintf' function. */
+#undef HAVE_VASPRINTF
+
+/* Define if va_copy exists */
+#undef HAVE_VA_COPY
+
+/* Define to 1 if you have the <vis.h> header file. */
+#undef HAVE_VIS_H
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#undef HAVE_VSNPRINTF
+
+/* Define to 1 if you have the `waitpid' function. */
+#undef HAVE_WAITPID
+
+/* Define to 1 if you have the `warn' function. */
+#undef HAVE_WARN
+
+/* Define to 1 if you have the <wchar.h> header file. */
+#undef HAVE_WCHAR_H
+
+/* Define to 1 if you have the `wcwidth' function. */
+#undef HAVE_WCWIDTH
+
+/* Define to 1 if you have the `_getlong' function. */
+#undef HAVE__GETLONG
+
+/* Define to 1 if you have the `_getpty' function. */
+#undef HAVE__GETPTY
+
+/* Define to 1 if you have the `_getshort' function. */
+#undef HAVE__GETSHORT
+
+/* Define if you have struct __res_state _res as an extern */
+#undef HAVE__RES_EXTERN
+
+/* Define to 1 if you have the `__b64_ntop' function. */
+#undef HAVE___B64_NTOP
+
+/* Define to 1 if you have the `__b64_pton' function. */
+#undef HAVE___B64_PTON
+
+/* Define if compiler implements __FUNCTION__ */
+#undef HAVE___FUNCTION__
+
+/* Define if libc defines __progname */
+#undef HAVE___PROGNAME
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE___SS_FAMILY_IN_SS
+
+/* Define if __va_copy exists */
+#undef HAVE___VA_COPY
+
+/* Define if compiler implements __func__ */
+#undef HAVE___func__
+
+/* Define this if you are using the Heimdal version of Kerberos V5 */
+#undef HEIMDAL
+
+/* Define if you need to use IP address instead of hostname in $DISPLAY */
+#undef IPADDR_IN_DISPLAY
+
+/* Detect IPv4 in IPv6 mapped addresses and treat as IPv4 */
+#undef IPV4_IN_IPV6
+
+/* Define if your system choked on IP TOS setting */
+#undef IP_TOS_IS_BROKEN
+
+/* Define if you want Kerberos 5 support */
+#undef KRB5
+
+/* Define if pututxline updates lastlog too */
+#undef LASTLOG_WRITE_PUTUTXLINE
+
+/* Define to whatever link() returns for "not supported" if it doesn't return
+   EOPNOTSUPP. */
+#undef LINK_OPNOTSUPP_ERRNO
+
+/* Lock all memory to protect sshd against Linux kcompactd */
+#undef LINUX_MEMLOCK_ONFAULT
+
+/* Adjust Linux out-of-memory killer */
+#undef LINUX_OOM_ADJUST
+
+/* max value of long long calculated by configure */
+#undef LLONG_MAX
+
+/* min value of long long calculated by configure */
+#undef LLONG_MIN
+
+/* Account locked with pw(1) */
+#undef LOCKED_PASSWD_PREFIX
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_STRING
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_SUBSTR
+
+/* Some systems need a utmpx entry for /bin/login to work */
+#undef LOGIN_NEEDS_UTMPX
+
+/* Set this to your mail directory if you do not have _PATH_MAILDIR */
+#undef MAIL_DIRECTORY
+
+/* Define if your compiler lacks __builtin_popcount */
+#undef MISSING_BUILTIN_POPCOUNT
+
+/* Need setpgrp to for controlling tty */
+#undef NEED_SETPGRP
+
+/* compiler does not accept __attribute__ on prototype args */
+#undef NO_ATTRIBUTE_ON_PROTOTYPE_ARGS
+
+/* compiler does not accept __attribute__ on return types */
+#undef NO_ATTRIBUTE_ON_RETURN_TYPE
+
+/* SA_RESTARTed signals do no interrupt select */
+#undef NO_SA_RESTART
+
+/* Define to disable UID restoration test */
+#undef NO_UID_RESTORATION_TEST
+
+/* Define if X11 doesn't support AF_UNIX sockets on that system */
+#undef NO_X11_UNIX_SOCKETS
+
+/* Define if EVP_DigestUpdate returns void */
+#undef OPENSSL_EVP_DIGESTUPDATE_VOID
+
+/* OpenSSL has ECC */
+#undef OPENSSL_HAS_ECC
+
+/* libcrypto has ed25519 support */
+#undef OPENSSL_HAS_ED25519
+
+/* libcrypto has NID_X9_62_prime256v1 */
+#undef OPENSSL_HAS_NISTP256
+
+/* libcrypto has NID_secp384r1 */
+#undef OPENSSL_HAS_NISTP384
+
+/* libcrypto has NID_secp521r1 */
+#undef OPENSSL_HAS_NISTP521
+
+/* libcrypto is missing AES 192 and 256 bit functions */
+#undef OPENSSL_LOBOTOMISED_AES
+
+/* Define if you want the OpenSSL internally seeded PRNG only */
+#undef OPENSSL_PRNG_ONLY
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define if you are using Solaris-derived PAM which passes pam_messages to
+   the conversation function with an extra level of indirection */
+#undef PAM_SUN_CODEBASE
+
+/* Work around problematic Linux PAM modules handling of PAM_TTY */
+#undef PAM_TTY_KLUDGE
+
+/* must supply username to passwd */
+#undef PASSWD_NEEDS_USERNAME
+
+/* System dirs owned by bin (uid 2) */
+#undef PLATFORM_SYS_DIR_UID
+
+/* need inet in pledge for setsockopt IP_TOS */
+#undef PLEDGE_EXTRA_INET
+
+/* Define if poll 2nd arg is ulong */
+#undef POLL_NFDS_T_ULONG
+
+/* Port number of PRNGD/EGD random number socket */
+#undef PRNGD_PORT
+
+/* Location of PRNGD/EGD random number socket */
+#undef PRNGD_SOCKET
+
+/* read(1) can return 0 for a non-closed fd */
+#undef PTY_ZEROREAD
+
+/* Sandbox using capsicum */
+#undef SANDBOX_CAPSICUM
+
+/* Sandbox using Darwin sandbox_init(3) */
+#undef SANDBOX_DARWIN
+
+/* no privsep sandboxing */
+#undef SANDBOX_NULL
+
+/* Sandbox using setrlimit(2) */
+#undef SANDBOX_RLIMIT
+
+/* Sandbox using seccomp filter */
+#undef SANDBOX_SECCOMP_FILTER
+
+/* setrlimit RLIMIT_FSIZE works */
+#undef SANDBOX_SKIP_RLIMIT_FSIZE
+
+/* define if setrlimit RLIMIT_NOFILE breaks things */
+#undef SANDBOX_SKIP_RLIMIT_NOFILE
+
+/* Sandbox using Solaris/Illumos privileges */
+#undef SANDBOX_SOLARIS
+
+/* Specify the system call convention in use */
+#undef SECCOMP_AUDIT_ARCH
+
+/* Define if your platform breaks doing a seteuid before a setuid */
+#undef SETEUID_BREAKS_SETUID
+
+/* The size of `int', as computed by sizeof. */
+#undef SIZEOF_INT
+
+/* The size of `long int', as computed by sizeof. */
+#undef SIZEOF_LONG_INT
+
+/* The size of `long long int', as computed by sizeof. */
+#undef SIZEOF_LONG_LONG_INT
+
+/* The size of `short int', as computed by sizeof. */
+#undef SIZEOF_SHORT_INT
+
+/* The size of `time_t', as computed by sizeof. */
+#undef SIZEOF_TIME_T
+
+/* Define as const if snprintf() can declare const char *fmt */
+#undef SNPRINTF_CONST
+
+/* sockaddr_in has sin_len */
+#undef SOCK_HAS_LEN
+
+/* Define to a Set Process Title type if your system is supported by
+   bsd-setproctitle.c */
+#undef SPT_TYPE
+
+/* Define if sshd somehow reacquires a controlling TTY after setsid() */
+#undef SSHD_ACQUIRES_CTTY
+
+/* sshd PAM service name */
+#undef SSHD_PAM_SERVICE
+
+/* Use audit debugging module */
+#undef SSH_AUDIT_EVENTS
+
+/* Windows is sensitive to read buffer size */
+#undef SSH_IOBUFSZ
+
+/* non-privileged user for privilege separation */
+#undef SSH_PRIVSEP_USER
+
+/* Use tunnel device compatibility to OpenBSD */
+#undef SSH_TUN_COMPAT_AF
+
+/* Open tunnel devices the FreeBSD way */
+#undef SSH_TUN_FREEBSD
+
+/* Open tunnel devices the Linux tun/tap way */
+#undef SSH_TUN_LINUX
+
+/* No layer 2 tunnel support */
+#undef SSH_TUN_NO_L2
+
+/* Open tunnel devices the OpenBSD way */
+#undef SSH_TUN_OPENBSD
+
+/* Prepend the address family to IP tunnel traffic */
+#undef SSH_TUN_PREPEND_AF
+
+/* Define to 1 if all of the C90 standard headers exist (not just the ones
+   required in a freestanding environment). This macro is provided for
+   backward compatibility; new code need not use it. */
+#undef STDC_HEADERS
+
+/* Define if you want a different $PATH for the superuser */
+#undef SUPERUSER_PATH
+
+/* syslog_r function is safe to use in in a signal handler */
+#undef SYSLOG_R_SAFE_IN_SIGHAND
+
+/* Have sshd notify systemd on start/reload */
+#undef SYSTEMD_NOTIFY
+
+/* Support routing domains using Linux VRF */
+#undef SYS_RDOMAIN_LINUX
+
+/* Support passwords > 8 chars */
+#undef UNIXWARE_LONG_PASSWORDS
+
+/* Specify default $PATH */
+#undef USER_PATH
+
+/* Define this if you want to use libkafs' AFS support */
+#undef USE_AFS
+
+/* Use BSM audit module */
+#undef USE_BSM_AUDIT
+
+/* Use btmp to log bad logins */
+#undef USE_BTMP
+
+/* Use libedit for sftp */
+#undef USE_LIBEDIT
+
+/* Use Linux audit module */
+#undef USE_LINUX_AUDIT
+
+/* Enable OpenSSL engine support */
+#undef USE_OPENSSL_ENGINE
+
+/* Define if you want to enable PAM support */
+#undef USE_PAM
+
+/* Use PIPES instead of a socketpair() */
+#undef USE_PIPES
+
+/* Define if you have Solaris privileges */
+#undef USE_SOLARIS_PRIVS
+
+/* Define if you have Solaris process contracts */
+#undef USE_SOLARIS_PROCESS_CONTRACTS
+
+/* Define if you have Solaris projects */
+#undef USE_SOLARIS_PROJECTS
+
+/* Use libwtmpdb for sshd */
+#undef USE_WTMPDB
+
+/* compiler variable declarations after code */
+#undef VARIABLE_DECLARATION_AFTER_CODE
+
+/* compiler supports variable length arrays */
+#undef VARIABLE_LENGTH_ARRAYS
+
+/* Define if you shouldn't strip 'tty' from your ttyname in [uw]tmp */
+#undef WITH_ABBREV_NO_TTY
+
+/* Define if you want to enable AIX4's authenticate function */
+#undef WITH_AIXAUTHENTICATE
+
+/* Define if you have/want arrays (cluster-wide session management, not C
+   arrays) */
+#undef WITH_IRIX_ARRAY
+
+/* Define if you want IRIX audit trails */
+#undef WITH_IRIX_AUDIT
+
+/* Define if you want IRIX kernel jobs */
+#undef WITH_IRIX_JOBS
+
+/* Define if you want IRIX project management */
+#undef WITH_IRIX_PROJECT
+
+/* use libcrypto for cryptography */
+#undef WITH_OPENSSL
+
+/* Define if you want SELinux support. */
+#undef WITH_SELINUX
+
+/* Enable zlib */
+#undef WITH_ZLIB
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+#  define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+#  undef WORDS_BIGENDIAN
+# endif
+#endif
+
+/* Define if xauth is found in your path */
+#undef XAUTH_PATH
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* log for bad login attempts */
+#undef _PATH_BTMP
+
+/* Full path of your "passwd" program */
+#undef _PATH_PASSWD_PROG
+
+/* Specify location of ssh.pid */
+#undef _PATH_SSH_PIDDIR
+
+/* Define if we don't have struct __res_state in resolv.h */
+#undef __res_state
+
+/* Define to rpl_calloc if the replacement function should be used. */
+#undef calloc
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
+
+/* Define to rpl_realloc if the replacement function should be used. */
+#undef realloc
+
+/* type to use in place of socklen_t if not defined */
+#undef socklen_t
--- a/configure~	1970-01-01 04:00:00.000000000 +0400
+++ b/configure~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,28438 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.71 for OpenSSH Portable.
+#
+# Report bugs to <openssh-unix-dev@mindrot.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
+# Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
+if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else $as_nop
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+
+# Reset variables that may have inherited troublesome values from
+# the environment.
+
+# IFS needs to be set, to space, tab, and newline, in precisely that order.
+# (If _AS_PATH_WALK were called with IFS unset, it would have the
+# side effect of setting IFS to empty, thus disabling word splitting.)
+# Quoting is to prevent editors from complaining about space-tab.
+as_nl='
+'
+export as_nl
+IFS=" ""	$as_nl"
+
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# Ensure predictable behavior from utilities with locale-dependent output.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# We cannot yet rely on "unset" to work, but we need these variables
+# to be unset--not just set to an empty or harmless value--now, to
+# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh).  This construct
+# also avoids known problems related to "unset" and subshell syntax
+# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
+for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
+do eval test \${$as_var+y} \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+
+# Ensure that fds 0, 1, and 2 are open.
+if (exec 3>&0) 2>/dev/null; then :; else exec 0</dev/null; fi
+if (exec 3>&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
+if (exec 3>&2)            ; then :; else exec 2>/dev/null; fi
+
+# The user is always right.
+if ${PATH_SEPARATOR+false} :; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    test -r "$as_dir$0" && as_myself=$as_dir$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="as_nop=:
+if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else \$as_nop
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" )
+then :
+
+else \$as_nop
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+blah=\$(echo \$(echo blah))
+test x\"\$blah\" = xblah || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null
+then :
+  as_have_required=yes
+else $as_nop
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null
+then :
+
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null
+then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+IFS=$as_save_IFS
+if $as_found
+then :
+
+else $as_nop
+  if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi
+fi
+
+
+      if test "x$CONFIG_SHELL" != x
+then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno
+then :
+  printf "%s\n" "$0: This script requires a shell more modern than all"
+  printf "%s\n" "$0: the shells that I found on your system."
+  if test ${ZSH_VERSION+y} ; then
+    printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and
+$0: openssh-unix-dev@mindrot.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
+then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else $as_nop
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
+then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else $as_nop
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  printf "%s\n" "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+# Determine whether it's possible to make 'echo' print without a newline.
+# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
+# for compatibility with existing Makefiles.
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+# For backward compatibility with old third-party macros, we provide
+# the shell variables $as_echo and $as_echo_n.  New code should use
+# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
+as_echo='printf %s\n'
+as_echo_n='printf %s'
+
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='OpenSSH'
+PACKAGE_TARNAME='openssh'
+PACKAGE_VERSION='Portable'
+PACKAGE_STRING='OpenSSH Portable'
+PACKAGE_BUGREPORT='openssh-unix-dev@mindrot.org'
+PACKAGE_URL=''
+
+ac_unique_file="ssh.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stddef.h>
+#ifdef HAVE_STDIO_H
+# include <stdio.h>
+#endif
+#ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+#ifdef HAVE_STRING_H
+# include <string.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_header_c_list=
+ac_subst_vars='LTLIBOBJS
+COMPATINCLUDES
+CFLAGS_NOPIE
+LDFLAGS_NOPIE
+TMUX
+DROPBEARCONVERT
+DROPBEARKEY
+DBCLIENT
+DROPBEAR
+CONCH
+PUTTYGEN
+PLINK
+DEPEND
+UNSUPPORTED_ALGORITHMS
+TEST_MALLOC_OPTIONS
+TEST_SSH_UTF8
+TEST_SSH_IPV6
+piddir
+user_path
+mansubdir
+MANTYPE
+XAUTH_PATH
+STRIP_OPT
+xauth_path
+PRIVSEP_PATH
+CHANNELLIBS
+K5LIBS
+GSSLIBS
+KRB5CONF
+SSHDLIBS
+SSH_PRIVSEP_USER
+SK_STANDALONE
+LIBFIDO2
+SK_DUMMY_LIBRARY
+OPENSSL_BIN
+openssl_bin
+PICFLAG
+LIBWTMPDB
+LIBEDIT
+LDNSCONFIG
+LIBOBJS
+TESTLIBS
+LD
+PATH_PASSWD_PROG
+STARTUP_SCRIPT_SHELL
+MAKE_PACKAGE_SUPPORTED
+PATH_USERADD_PROG
+PATH_GROUPADD_PROG
+MANFMT
+TEST_SHELL
+PKGCONFIG
+MANDOC
+NROFF
+GROFF
+SH
+TEST_MINUS_S_SH
+SED
+KILL
+CAT
+ac_ct_AR
+AR
+MKDIR_P
+EGREP
+GREP
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+RANLIB
+CPP
+AWK
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+runstatedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_largefile
+with_openssl
+with_stackprotect
+with_hardening
+with_retpoline
+with_rpath
+with_cflags
+with_cflags_after
+with_cppflags
+with_ldflags
+with_ldflags_after
+with_libs
+with_Werror
+with_linux_memlock_onfault
+with_solaris_contracts
+with_solaris_projects
+with_solaris_privs
+with_osfsia
+with_zlib
+with_zlib_version_check
+with_ldns
+with_libedit
+with_wtmpdb
+with_audit
+with_pie
+enable_pkcs11
+enable_security_key
+with_security_key_builtin
+with_security_key_standalone
+with_ssl_dir
+with_openssl_header_check
+with_ssl_engine
+with_prngd_port
+with_prngd_socket
+with_pam
+with_pam_service
+with_privsep_user
+with_sandbox
+with_selinux
+with_kerberos5
+with_privsep_path
+with_xauth
+enable_strip
+with_maildir
+with_mantype
+with_shadow
+with_ipaddr_display
+enable_etc_default_login
+with_default_path
+with_superuser_path
+with_4in6
+with_bsd_auth
+with_pid_dir
+enable_fd_passing
+enable_lastlog
+enable_utmp
+enable_utmpx
+enable_wtmp
+enable_wtmpx
+enable_libutil
+enable_pututline
+enable_pututxline
+with_lastlog
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir runstatedir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures OpenSSH Portable to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/openssh]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of OpenSSH Portable:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-largefile     omit support for large files
+  --disable-pkcs11        disable PKCS#11 support code [no]
+  --disable-security-key  disable U2F/FIDO support code no
+  --disable-strip         Disable calling strip(1) on install
+  --disable-etc-default-login Disable using PATH from /etc/default/login no
+  --disable-fd-passing    disable file descriptor passsing no
+  --disable-lastlog       disable use of lastlog even if detected no
+  --disable-utmp          disable use of utmp even if detected no
+  --disable-utmpx         disable use of utmpx even if detected no
+  --disable-wtmp          disable use of wtmp even if detected no
+  --disable-wtmpx         disable use of wtmpx even if detected no
+  --disable-libutil       disable use of libutil (login() etc.) no
+  --disable-pututline     disable use of pututline() etc. (uwtmp) no
+  --disable-pututxline    disable use of pututxline() etc. (uwtmpx) no
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --without-openssl       Disable use of OpenSSL; use only limited internal crypto **EXPERIMENTAL**
+  --without-stackprotect  Don't use compiler's stack protection
+  --without-hardening     Don't use toolchain hardening flags
+  --without-retpoline     Enable retpoline spectre mitigation
+  --without-rpath         Disable auto-added -R linker paths
+  --with-cflags           Specify additional flags to pass to compiler
+  --with-cflags-after     Specify additional flags to pass to compiler after configure
+  --with-cppflags         Specify additional flags to pass to preprocessor
+  --with-ldflags          Specify additional flags to pass to linker
+  --with-ldflags-after    Specify additional flags to pass to linker after configure
+  --with-libs             Specify additional libraries to link with
+  --with-Werror           Build main code with -Werror
+  --with-linux-memlock-onfault Enables memory locking on Linux
+  --with-solaris-contracts Enable Solaris process contracts (experimental)
+  --with-solaris-projects Enable Solaris projects (experimental)
+  --with-solaris-privs    Enable Solaris/Illumos privileges (experimental)
+  --with-osfsia           Enable Digital Unix SIA
+  --with-zlib=PATH        Use zlib in PATH
+  --without-zlib-version-check Disable zlib version check
+  --with-ldns[=PATH]      Use ldns for DNSSEC support (optionally in PATH)
+  --with-libedit[=PATH]   Enable libedit support for sftp
+  --with-wtmpdb[=PATH]   Enable wtmpdb support for sshd
+  --with-audit=module     Enable audit support (modules=debug,bsm,linux)
+  --with-pie              Build Position Independent Executables if possible
+  --with-security-key-builtin include builtin U2F/FIDO support
+  --with-security-key-standalone build standalone sk-libfido2 SecurityKeyProvider
+  --with-ssl-dir=PATH     Specify path to OpenSSL installation
+  --without-openssl-header-check Disable OpenSSL version consistency check
+  --with-ssl-engine       Enable OpenSSL (hardware) ENGINE support
+  --with-prngd-port=PORT  read entropy from PRNGD/EGD TCP localhost:PORT
+  --with-prngd-socket=FILE read entropy from PRNGD/EGD socket FILE (default=/var/run/egd-pool)
+  --with-pam              Enable PAM support
+  --with-pam-service=name Specify PAM service name
+  --with-privsep-user=user Specify non-privileged user for privilege separation
+  --with-sandbox=style    Specify privilege separation sandbox (no, capsicum, darwin, rlimit, seccomp_filter)
+  --with-selinux          Enable SELinux support
+  --with-kerberos5=PATH   Enable Kerberos 5 support
+  --with-privsep-path=xxx Path for privilege separation chroot (default=/var/empty)
+  --with-xauth=PATH       Specify path to xauth program
+  --with-maildir=/path/to/mail    Specify your system mail directory
+  --with-mantype=man|cat|doc  Set man page type
+  --without-shadow        Disable shadow password support
+  --with-ipaddr-display   Use ip address instead of hostname in $DISPLAY
+  --with-default-path=    Specify default $PATH environment for server
+  --with-superuser-path=  Specify different path for super-user
+  --with-4in6             Check for and convert IPv4 in IPv6 mapped addresses
+  --with-bsd-auth         Enable BSD auth support
+  --with-pid-dir=PATH     Specify location of sshd.pid file
+  --with-lastlog=FILE|DIR specify lastlog location common locations
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <openssh-unix-dev@mindrot.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for configure.gnu first; this name is used for a wrapper for
+    # Metaconfig's "Configure" on case-insensitive file systems.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+OpenSSH configure Portable
+generated by GNU Autoconf 2.71
+
+Copyright (C) 2021 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest.beam
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to run conftest.$ac_ext, and return whether this succeeded. Assumes that
+# executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: program exited with status $ac_status" >&5
+       printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as

[truncated 726918 bytes]

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`, `make` and, if available, `make check`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem
Fixer observed `sshd-session: gis [priv]`, but the bundle does not establish an OpenSSH busy loop. The sampled process is sleeping in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, strace captured one line in 5 seconds, and total sampled `sshd-session` CPU was only `0.3%`.

## Evidence Confidence
inferred

## Proposed Subject
no patch: require stronger sshd-session loop evidence

## Patch Plan
Do not edit source files. Replace the prior Fixer patch by rejecting its unrelated `buildpkg.sh` addition; it does not address the observed `sshd-session` signal.

Docs/conventions checked: `README.md`, plus subsystem-relevant `README.privsep` and `regress/README.regress`. Local helpers/conventions found include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers. Nearby `monitor_read()` intentionally blocks in `poll(..., -1)`, and `server_loop2()` sleeps in `ppoll()` through `ptimeout_*`.

If later evidence proves a real userspace loop, scope a source patch to the confirmed path in `monitor.c`, `serverloop.c`, `packet.c`, or the compat poll wrapper. Keep control flow local and bounded, using existing `continue`/`return` style rather than avoidable `goto`.

## Risks
A speculative timeout or wakeup change could break valid idle SSH sessions or privsep monitor behavior.

No source patch means a real but currently unproven issue remains unresolved until stronger evidence is collected.

## Validation
First try from the workspace root:

```sh
./configure && make
```

If that fails because generated files or dependencies are missing, record the exact failure, then run the narrowest relevant clean-checkout command, likely:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded independent reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

If a test session starts, sample the spawned `sshd-session` with `strace -ttT -p <pid>` and a symbolized backtrace/perf sample. Do not claim `reproduced` unless this shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop.

## Evidence Confidence
inferred

## Issue Connection
The collected signal was `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, one `restart_syscall` strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The sampled hot symbols are kernel memory-management paths, not symbolized OpenSSH frames.

The cautious inference is that this is normal privilege-separation monitor behavior. In OpenSSH, privilege separation keeps a privileged monitor process available for root-only operations; nearby `monitor_read()` intentionally blocks with `poll(..., -1)`, and `server_loop2()` sleeps in `ppoll()` using the local `ptimeout_*` helpers.

I made no source change and did not apply the prior `buildpkg.sh` patch, because that patch is unrelated to the sshd-session evidence. Docs/conventions checked: `README.md`; subsystem helpers checked include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers.

The expected effect is to avoid sending an upstream-hostile speculative patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback `autoreconf && ./configure && make sshd-session` completed and linked `sshd-session`.

Bounded reproduction attempt `make tests LTESTS=connect-privsep` failed before starting a privsep session: `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check `./sshd-session` exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. No command reproduced sustained CPU use or a userspace loop. Final `git status --short --untracked-files=all` is clean.

## Review Pass 1

RESULT: ok

The workspace is clean, with no source diff and no untracked validation artifacts. The author response correctly uses `inferred`, lists `Git Add Paths` as `None`, and does not present the profiler-only signal as a confirmed OpenSSH bug.

The rationale matches the evidence and local code: the bundle shows a sleeping `sshd-session` in `poll`/`restart_syscall` with low sampled CPU, while `monitor_read()` and `serverloop.c` contain intentional blocking waits. Validation also meets the expectation: project-level `./configure && make` was attempted and its stale-configure blocker was reported, followed by a focused `sshd-session` build and a bounded reproduction attempt that failed before starting a privsep session.

Diff

--- a/buildpkg.sh	1970-01-01 04:00:00.000000000 +0400
+++ b/buildpkg.sh	2026-05-12 09:44:33.537007872 +0400
@@ -0,0 +1,677 @@
+#!/bin/sh
+#
+# Fake Root Solaris/SVR4/SVR5 Build System - Prototype
+#
+# The following code has been provide under Public Domain License.  I really
+# don't care what you use it for.  Just as long as you don't complain to me
+# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
+#
+umask 022
+#
+# Options for building the package
+# You can create a openssh-config.local with your customized options
+#
+REMOVE_FAKE_ROOT_WHEN_DONE=yes
+#
+# uncommenting TEST_DIR and using
+# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
+# and
+# PKGNAME=tOpenSSH should allow testing a package without interfering
+# with a real OpenSSH package on a system. This is not needed on systems
+# that support the -R option to pkgadd.
+#TEST_DIR=/var/tmp	# leave commented out for production build
+PKGNAME=OpenSSH
+# revisions within the same version (REV=a)
+#REV=
+SYSVINIT_NAME=opensshd
+AWK=${AWK:="nawk"}
+MAKE=${MAKE:="make"}
+SSHDUID=67	# Default privsep uid
+SSHDGID=67	# Default privsep gid
+# uncomment these next three as needed
+#PERMIT_ROOT_LOGIN=no
+#X11_FORWARDING=yes
+#USR_LOCAL_IS_SYMLINK=yes
+# System V init run levels
+SYSVINITSTART=S98
+SYSVINITSTOP=K30
+# We will source these if they exist
+POST_MAKE_INSTALL_FIXES=./pkg-post-make-install-fixes.sh
+POST_PROTOTYPE_EDITS=./pkg-post-prototype-edit.sh
+# We'll be one level deeper looking for these
+PKG_PREINSTALL_LOCAL=../pkg-preinstall.local
+PKG_POSTINSTALL_LOCAL=../pkg-postinstall.local
+PKG_PREREMOVE_LOCAL=../pkg-preremove.local
+PKG_POSTREMOVE_LOCAL=../pkg-postremove.local
+PKG_REQUEST_LOCAL=../pkg-request.local
+# end of sourced files
+#
+OPENSSHD=opensshd.init
+OPENSSH_MANIFEST=openssh.xml
+OPENSSH_FMRI=svc:/site/${SYSVINIT_NAME}:default
+SMF_METHOD_DIR=/lib/svc/method/site
+SMF_MANIFEST_DIR=/var/svc/manifest/site
+
+PATH_GROUPADD_PROG=/usr/sbin/groupadd
+PATH_USERADD_PROG=/usr/sbin/useradd
+PATH_PASSWD_PROG=/usr/bin/passwd
+#
+# list of system directories we do NOT want to change owner/group/perms
+# when installing our package
+SYSTEM_DIR="/etc	\
+/etc/init.d		\
+/etc/rcS.d		\
+/etc/rc0.d		\
+/etc/rc1.d		\
+/etc/rc2.d		\
+/etc/opt		\
+/lib			\
+/lib/svc		\
+/lib/svc/method		\
+/lib/svc/method/site	\
+/opt			\
+/opt/bin		\
+/usr			\
+/usr/bin		\
+/usr/lib		\
+/usr/sbin		\
+/usr/share		\
+/usr/share/man		\
+/usr/share/man/man1	\
+/usr/share/man/man8	\
+/usr/local		\
+/usr/local/bin		\
+/usr/local/etc		\
+/usr/local/libexec	\
+/usr/local/man		\
+/usr/local/man/man1	\
+/usr/local/man/man8	\
+/usr/local/sbin		\
+/usr/local/share	\
+/var			\
+/var/opt		\
+/var/run		\
+/var/svc		\
+/var/svc/manifest	\
+/var/svc/manifest/site  \
+/var/tmp		\
+/tmp"
+
+# We may need to build as root so we make sure PATH is set up
+# only set the path if it's not set already
+[ -d /opt/bin ]  &&  {
+	echo $PATH | grep ":/opt/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/opt/bin
+}
+[ -d /usr/local/bin ]  &&  {
+	echo $PATH | grep ":/usr/local/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
+}
+[ -d /usr/ccs/bin ]  &&  {
+	echo $PATH | grep ":/usr/ccs/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
+}
+export PATH
+#
+
+[ -f Makefile ]  ||  {
+	echo "Please run this script from your build directory"
+	exit 1
+}
+
+# we will look for openssh-config.local to override the above options
+[ -s ./openssh-config.local ]  &&  . ./openssh-config.local
+
+START=`pwd`
+FAKE_ROOT=$START/pkg
+
+## Fill in some details, like prefix and sysconfdir
+for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir
+do
+	eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
+done
+
+## Are we using Solaris' SMF?
+DO_SMF=0
+if egrep "^#define USE_SOLARIS_PROCESS_CONTRACTS" config.h > /dev/null 2>&1
+then
+	DO_SMF=1
+fi
+
+## Collect value of privsep user
+for confvar in SSH_PRIVSEP_USER
+do
+	eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
+done
+
+## Set privsep defaults if not defined
+if [ -z "$SSH_PRIVSEP_USER" ]
+then
+	SSH_PRIVSEP_USER=sshd
+fi
+
+## Extract common info requires for the 'info' part of the package.
+VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'`
+
+ARCH=`uname -m`
+DEF_MSG="\n"
+OS_VER=`uname -v`
+SCRIPT_SHELL=/sbin/sh
+UNAME_R=`uname -r`
+UNAME_S=`uname -s`
+case ${UNAME_S} in
+	SunOS)	UNAME_S=Solaris
+		OS_VER=${UNAME_R}
+		ARCH=`uname -p`
+		RCS_D=yes
+		DEF_MSG="(default: n)"
+		;;
+	SCO_SV)	case ${UNAME_R} in
+			3.2)	UNAME_S=OpenServer5
+		OS_VER=`uname -X | grep Release | sed -e 's/^Rel.*3.2v//'`
+				;;
+			5)	UNAME_S=OpenServer6
+				;;
+		esac
+		SCRIPT_SHELL=/bin/sh
+		RC1_D=no
+		DEF_MSG="(default: n)"
+		;;
+esac
+
+case `basename $0` in
+	buildpkg.sh)
+## Start by faking root install
+echo "Faking root install..."
+[ -d $FAKE_ROOT ]  &&  rm -fr $FAKE_ROOT
+mkdir $FAKE_ROOT
+${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
+if [ $? -gt 0 ]
+then
+	echo "Fake root install failed, stopping."
+	exit 1
+fi
+
+## Setup our run level stuff while we are at it.
+if [ $DO_SMF -eq 1 ]
+then
+	# For Solaris' SMF, /lib/svc/method/site is the preferred place
+	# for start/stop scripts that aren't supplied with the OS, and
+	# similarly /var/svc/manifest/site for manifests.
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+
+	cat ${OPENSSH_MANIFEST} | \
+	    sed -e "s|__SYSVINIT_NAME__|${SYSVINIT_NAME}|" \
+	    -e "s|__SMF_METHOD_DIR__|${SMF_METHOD_DIR}|" \
+	    > $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+	chmod 644 $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+fi
+
+[ "${PERMIT_ROOT_LOGIN}" = no ]  &&  \
+	perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+[ "${X11_FORWARDING}" = yes ]  &&  \
+	perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+# fix PrintMotd
+perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
+	$FAKE_ROOT${sysconfdir}/sshd_config
+
+# We don't want to overwrite config files on multiple installs
+mv $FAKE_ROOT${sysconfdir}/ssh_config $FAKE_ROOT${sysconfdir}/ssh_config.default
+mv $FAKE_ROOT${sysconfdir}/sshd_config $FAKE_ROOT${sysconfdir}/sshd_config.default
+
+# local tweeks here
+[ -s "${POST_MAKE_INSTALL_FIXES}" ]  &&  . ${POST_MAKE_INSTALL_FIXES}
+
+cd $FAKE_ROOT
+
+## Ok, this is outright wrong, but it will work.  I'm tired of pkgmk
+## whining.
+for i in *; do
+  PROTO_ARGS="$PROTO_ARGS $i=/$i";
+done
+
+## Build info file
+echo "Building pkginfo file..."
+cat > pkginfo << _EOF
+PKG=$PKGNAME
+NAME="OpenSSH Portable for ${UNAME_S}"
+DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
+VENDOR="OpenSSH Portable Team - https://www.openssh.com/portable.html"
+ARCH=$ARCH
+VERSION=$VERSION$REV
+CATEGORY="Security,application"
+BASEDIR=/
+CLASSES="none"
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+
+## Build empty depend file that may get updated by $POST_PROTOTYPE_EDITS
+echo "Building depend file..."
+touch depend
+
+## Build space file
+echo "Building space file..."
+if [ $DO_SMF -eq 1 ]
+then
+	# XXX Is this necessary?  If not, remove space line from mk-proto.awk.
+	touch space
+else
+	cat > space << _EOF
+# extra space required by start/stop links added by installf
+# in postinstall
+$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1
+$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME} 0 1
+_EOF
+	[ "$RC1_D" = no ]  ||  \
+	echo "$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+	[ "$RCS_D" = yes ]  &&  \
+	echo "$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+fi
+
+## Build preinstall file
+echo "Building preinstall file..."
+cat > preinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+_EOF
+
+# local preinstall changes here
+[ -s "${PKG_PREINSTALL_LOCAL}" ]  &&  . ${PKG_PREINSTALL_LOCAL}
+
+cat >> preinstall << _EOF
+#
+if [ "\${PRE_INS_STOP}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm disable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+	fi
+fi
+
+exit 0
+_EOF
+
+## Build postinstall file
+echo "Building postinstall file..."
+cat > postinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
+
+# make rc?.d dirs only if we are doing a test install
+[ -n "${TEST_DIR}" ]  &&  [ $DO_SMF -ne 1 ] && {
+	[ "$RCS_D" = yes ]  &&  mkdir -p ${TEST_DIR}/etc/rcS.d
+	mkdir -p ${TEST_DIR}/etc/rc0.d
+	[ "$RC1_D" = no ]  ||  mkdir -p ${TEST_DIR}/etc/rc1.d
+	mkdir -p ${TEST_DIR}/etc/rc2.d
+}
+
+if [ $DO_SMF -eq 1 ]
+then
+	# Delete the existing service, if it exists, then import the
+	# new one.
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+	# NOTE, The manifest disables sshd by default.
+	svccfg import ${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	if [ "\${USE_SYM_LINKS}" = yes ]
+	then
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+	else
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+	fi
+fi
+
+# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
+[ -d $piddir ]  ||  installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 0755 root sys
+
+_EOF
+
+# local postinstall changes here
+[ -s "${PKG_POSTINSTALL_LOCAL}" ]  &&  . ${PKG_POSTINSTALL_LOCAL}
+
+cat >> postinstall << _EOF
+installf -f ${PKGNAME}
+
+# Use chroot to handle PKG_INSTALL_ROOT
+if [ ! -z "\${PKG_INSTALL_ROOT}" ]
+then
+	chroot="chroot \${PKG_INSTALL_ROOT}"
+fi
+# If this is a test build, we will skip the groupadd/useradd/passwd commands
+if [ ! -z "${TEST_DIR}" ]
+then
+	chroot=echo
+fi
+
+	echo "PrivilegeSeparation user always required."
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
+	then
+		echo "PrivSep user $SSH_PRIVSEP_USER already exists."
+		SSH_PRIVSEP_GROUP=\`grep "^$SSH_PRIVSEP_USER:" \${PKG_INSTALL_ROOT}/etc/passwd | awk -F: '{print \$4}'\`
+		SSH_PRIVSEP_GROUP=\`grep ":\$SSH_PRIVSEP_GROUP:" \${PKG_INSTALL_ROOT}/etc/group | awk -F: '{print \$1}'\`
+	else
+		DO_PASSWD=yes
+	fi
+	[ -z "\$SSH_PRIVSEP_GROUP" ]  &&  SSH_PRIVSEP_GROUP=$SSH_PRIVSEP_USER
+
+	# group required?
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'\$SSH_PRIVSEP_GROUP'\$' >/dev/null
+	then
+		echo "PrivSep group \$SSH_PRIVSEP_GROUP already exists."
+	else
+		DO_GROUP=yes
+	fi
+
+	# create group if required
+	[ "\$DO_GROUP" = yes ]  &&  {
+		# Use gid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
+		then
+			:
+		else
+			sshdgid="-g $SSHDGID"
+		fi
+		echo "Creating PrivSep group \$SSH_PRIVSEP_GROUP."
+		\$chroot ${PATH_GROUPADD_PROG} \$sshdgid \$SSH_PRIVSEP_GROUP
+	}
+
+	# Create user if required
+	[ "\$DO_PASSWD" = yes ]  &&  {
+		# Use uid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDUID'\$' >/dev/null
+		then
+			:
+		else
+			sshduid="-u $SSHDUID"
+		fi
+		echo "Creating PrivSep user $SSH_PRIVSEP_USER."
+		\$chroot ${PATH_USERADD_PROG} -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
+		\$chroot ${PATH_PASSWD_PROG} -l $SSH_PRIVSEP_USER
+	}
+
+if [ "\${POST_INS_START}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm enable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
+	fi
+fi
+exit 0
+_EOF
+
+## Build preremove file
+echo "Building preremove file..."
+cat > preremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	svcadm disable $OPENSSH_FMRI
+else
+	${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+fi
+_EOF
+
+# local preremove changes here
+[ -s "${PKG_PREREMOVE_LOCAL}" ]  &&  . ${PKG_PREREMOVE_LOCAL}
+
+cat >> preremove << _EOF
+exit 0
+_EOF
+
+## Build postremove file
+echo "Building postremove file..."
+cat > postremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+fi
+_EOF
+
+# local postremove changes here
+[ -s "${PKG_POSTREMOVE_LOCAL}" ]  &&  . ${PKG_POSTREMOVE_LOCAL}
+
+cat >> postremove << _EOF
+exit 0
+_EOF
+
+## Build request file
+echo "Building request file..."
+cat > request << _EOF
+trap 'exit 3' 15
+
+_EOF
+
+[ -x /usr/bin/ckyorn ]  ||  cat >> request << _EOF
+
+ckyorn() {
+# for some strange reason OpenServer5 has no ckyorn
+# We build a striped down version here
+
+DEFAULT=n
+PROMPT="Yes or No [yes,no,?,quit]"
+HELP_PROMPT="        Enter y or yes if your answer is yes; n or no if your answer is no."
+USAGE="usage: ckyorn [options]
+where options may include:
+        -d default
+        -h help
+        -p prompt
+"
+
+if [ \$# != 0 ]
+then
+	while getopts d:p:h: c
+	do
+		case \$c in
+			h)	HELP_PROMPT="\$OPTARG" ;;
+			d)	DEFAULT=\$OPTARG ;;
+			p)	PROMPT=\$OPTARG ;;
+			\\?)	echo "\$USAGE" 1>&2
+				exit 1 ;;
+		esac
+	done
+	shift \`expr \$OPTIND - 1\`
+fi
+
+while true
+do
+	echo "\${PROMPT}\\c " 1>&2
+	read key
+	[ -z "\$key" ]  &&  key=\$DEFAULT
+	case \$key in
+		[n,N]|[n,N][o,O]|[y,Y]|[y,Y][e,E][s,S])	echo "\${key}\\c"
+			exit 0 ;;
+		\\?)	echo \$HELP_PROMPT 1>&2 ;;
+		q|quit)	echo "q\\c" 1>&2
+			exit 3 ;;
+	esac
+done
+
+}
+
+_EOF
+
+if [ $DO_SMF -eq 1 ]
+then
+	# This could get hairy, as the running sshd may not be under SMF.
+	# We'll assume an earlier version of OpenSSH started via SMF.
+	cat >> request << _EOF
+PRE_INS_STOP=no
+POST_INS_START=no
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  ] && \\
+    /usr/bin/svcs -H $OPENSSH_FMRI 2>&1 | egrep "^online" > /dev/null 2>&1
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+else
+	cat >> request << _EOF
+USE_SYM_LINKS=no
+PRE_INS_STOP=no
+POST_INS_START=no
+# Use symbolic links?
+ans=\`ckyorn -d n \\
+-p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$?
+case \$ans in
+	[y,Y]*)	USE_SYM_LINKS=yes ;;
+esac
+
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  -a  -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+USE_SYM_LINKS='\$USE_SYM_LINKS'
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+fi
+
+# local request changes here
+[ -s "${PKG_REQUEST_LOCAL}" ]  &&  . ${PKG_REQUEST_LOCAL}
+
+cat >> request << _EOF
+exit 0
+
+_EOF
+
+## Next Build our prototype
+echo "Building prototype file..."
+cat >mk-proto.awk << _EOF
+	    BEGIN { print "i pkginfo"; print "i depend"; \\
+		    print "i preinstall"; print "i postinstall"; \\
+ 		    print "i preremove"; print "i postremove"; \\
+		    print "i request"; print "i space"; \\
+		    split("$SYSTEM_DIR",sys_files); }
+	    {
+	     for (dir in sys_files) { if ( \$3 != sys_files[dir] )
+		     { if ( \$1 == "s" )
+			{ \$5=""; \$6=""; }
+		     else
+			{ \$5="root"; \$6="sys"; }
+		     }
+		else
+		     { \$4="?"; \$5="?"; \$6="?"; break;}
+	    } }
+	    { print; }
+_EOF
+
+find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \
+	pkgproto $PROTO_ARGS | ${AWK} -f mk-proto.awk > prototype
+
+# /usr/local is a symlink on some systems
+[ "${USR_LOCAL_IS_SYMLINK}" = yes ]  &&  {
+	grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
+	mv prototype.new prototype
+}
+
+## Step back a directory and now build the package.
+cd ..
+# local prototype tweeks here
+[ -s "${POST_PROTOTYPE_EDITS}" ]  &&  . ${POST_PROTOTYPE_EDITS}
+
+echo "Building package.."
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+	justpkg.sh)
+rm -fr ${FAKE_ROOT}/${PKGNAME}
+grep -v "^PSTAMP=" $FAKE_ROOT/pkginfo > $$tmp
+mv $$tmp $FAKE_ROOT/pkginfo
+cat >> $FAKE_ROOT/pkginfo << _EOF
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+esac
+
+[ "${REMOVE_FAKE_ROOT_WHEN_DONE}" = yes ]  &&  rm -rf $FAKE_ROOT
+exit 0
+
--- a/config.h.in~	1970-01-01 04:00:00.000000000 +0400
+++ b/config.h.in~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,2107 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
+/* Define if you have a getaddrinfo that fails for the all-zeros IPv6 address
+   */
+#undef AIX_GETNAMEINFO_HACK
+
+/* Define if your AIX loginfailed() function takes 4 arguments (AIX >= 5.2) */
+#undef AIX_LOGINFAILED_4ARG
+
+/* System only supports IPv4 audit records */
+#undef AU_IPv4
+
+/* Define if your resolver libs need this for getrrsetbyname */
+#undef BIND_8_COMPAT
+
+/* The system has incomplete BSM API */
+#undef BROKEN_BSM_API
+
+/* broken in chroots on older kernels */
+#undef BROKEN_CLOSEFROM
+
+/* Define if cmsg_type is not passed correctly */
+#undef BROKEN_CMSG_TYPE
+
+/* getaddrinfo is broken (if present) */
+#undef BROKEN_GETADDRINFO
+
+/* getgroups(0,NULL) will return -1 */
+#undef BROKEN_GETGROUPS
+
+/* getline is not what we expect */
+#undef BROKEN_GETLINE
+
+/* Do not use system glob */
+#undef BROKEN_GLOB
+
+/* Define if you system's inet_ntoa is busted (e.g. Irix gcc issue) */
+#undef BROKEN_INET_NTOA
+
+/* Define if your struct dirent expects you to allocate extra space for d_name
+   */
+#undef BROKEN_ONE_BYTE_DIRENT_D_NAME
+
+/* System poll(2) implementation is broken */
+#undef BROKEN_POLL
+
+/* Can't do comparisons on readv */
+#undef BROKEN_READV_COMPARISON
+
+/* NetBSD read function is sometimes redirected, breaking atomicio comparisons
+   against it */
+#undef BROKEN_READ_COMPARISON
+
+/* Needed for NeXT */
+#undef BROKEN_SAVED_UIDS
+
+/* Define if your setregid() is broken */
+#undef BROKEN_SETREGID
+
+/* Define if your setresgid() is broken */
+#undef BROKEN_SETRESGID
+
+/* Define if your setresuid() is broken */
+#undef BROKEN_SETRESUID
+
+/* Define if your setreuid() is broken */
+#undef BROKEN_SETREUID
+
+/* LynxOS has broken setvbuf() implementation */
+#undef BROKEN_SETVBUF
+
+/* QNX shadow support is broken */
+#undef BROKEN_SHADOW_EXPIRE
+
+/* Define if your snprintf is busted */
+#undef BROKEN_SNPRINTF
+
+/* strndup broken, see APAR IY61211 */
+#undef BROKEN_STRNDUP
+
+/* strnlen broken, see APAR IY62551 */
+#undef BROKEN_STRNLEN
+
+/* strnvis detected broken */
+#undef BROKEN_STRNVIS
+
+/* tcgetattr with ICANON may hang */
+#undef BROKEN_TCGETATTR_ICANON
+
+/* updwtmpx is broken (if present) */
+#undef BROKEN_UPDWTMPX
+
+/* Define if you have BSD auth support */
+#undef BSD_AUTH
+
+/* Define if you want to specify the path to your lastlog file */
+#undef CONF_LASTLOG_FILE
+
+/* Define if you want to specify the path to your utmp file */
+#undef CONF_UTMP_FILE
+
+/* Define if you want to specify the path to your wtmpx file */
+#undef CONF_WTMPX_FILE
+
+/* Define if you want to specify the path to your wtmp file */
+#undef CONF_WTMP_FILE
+
+/* Need to call setpgrp as root */
+#undef DISABLE_FD_PASSING
+
+/* Define if you don't want to use lastlog */
+#undef DISABLE_LASTLOG
+
+/* Define if you don't want to use your system's login() call */
+#undef DISABLE_LOGIN
+
+/* Define if you don't want to use pututline() etc. to write [uw]tmp */
+#undef DISABLE_PUTUTLINE
+
+/* Define if you don't want to use pututxline() etc. to write [uw]tmpx */
+#undef DISABLE_PUTUTXLINE
+
+/* Define if you want to disable shadow passwords */
+#undef DISABLE_SHADOW
+
+/* Define if you don't want to use utmp */
+#undef DISABLE_UTMP
+
+/* Define if you don't want to use utmpx */
+#undef DISABLE_UTMPX
+
+/* Define if you don't want to use wtmp */
+#undef DISABLE_WTMP
+
+/* Define if you don't want to use wtmpx */
+#undef DISABLE_WTMPX
+
+/* Enable for PKCS#11 support */
+#undef ENABLE_PKCS11
+
+/* Enable for U2F/FIDO support */
+#undef ENABLE_SK
+
+/* Enable for built-in U2F/FIDO support */
+#undef ENABLE_SK_INTERNAL
+
+/* define if fflush(NULL) does not work */
+#undef FFLUSH_NULL_BUG
+
+/* File names may not contain backslash characters */
+#undef FILESYSTEM_NO_BACKSLASH
+
+/* fsid_t has member val */
+#undef FSID_HAS_VAL
+
+/* fsid_t has member __val */
+#undef FSID_HAS___VAL
+
+/* getpgrp takes one arg */
+#undef GETPGRP_VOID
+
+/* Conflicting defs for getspnam */
+#undef GETSPNAM_CONFLICTING_DEFS
+
+/* Define if your system glob() function has the GLOB_ALTDIRFUNC extension */
+#undef GLOB_HAS_ALTDIRFUNC
+
+/* Define if your system glob() function has gl_matchc options in glob_t */
+#undef GLOB_HAS_GL_MATCHC
+
+/* Define if your system glob() function has gl_statv options in glob_t */
+#undef GLOB_HAS_GL_STATV
+
+/* Define this if you want GSSAPI support in the version 2 protocol */
+#undef GSSAPI
+
+/* Define if you want to use shadow password expire field */
+#undef HAS_SHADOW_EXPIRE
+
+/* Define if your system uses access rights style file descriptor passing */
+#undef HAVE_ACCRIGHTS_IN_MSGHDR
+
+/* Define if you have ut_addr in utmp.h */
+#undef HAVE_ADDR_IN_UTMP
+
+/* Define if you have ut_addr in utmpx.h */
+#undef HAVE_ADDR_IN_UTMPX
+
+/* Define if you have ut_addr_v6 in utmp.h */
+#undef HAVE_ADDR_V6_IN_UTMP
+
+/* Define if you have ut_addr_v6 in utmpx.h */
+#undef HAVE_ADDR_V6_IN_UTMPX
+
+/* Define to 1 if you have the `arc4random' function. */
+#undef HAVE_ARC4RANDOM
+
+/* Define to 1 if you have the `arc4random_buf' function. */
+#undef HAVE_ARC4RANDOM_BUF
+
+/* Define to 1 if you have the `arc4random_stir' function. */
+#undef HAVE_ARC4RANDOM_STIR
+
+/* Define to 1 if you have the `arc4random_uniform' function. */
+#undef HAVE_ARC4RANDOM_UNIFORM
+
+/* Define to 1 if you have the `asprintf' function. */
+#undef HAVE_ASPRINTF
+
+/* OpenBSD's gcc has bounded */
+#undef HAVE_ATTRIBUTE__BOUNDED__
+
+/* Have attribute nonnull */
+#undef HAVE_ATTRIBUTE__NONNULL__
+
+/* compiler supports nonstring attribute */
+#undef HAVE_ATTRIBUTE__NONSTRING__
+
+/* OpenBSD's gcc has sentinel */
+#undef HAVE_ATTRIBUTE__SENTINEL__
+
+/* Define to 1 if you have the `aug_get_machine' function. */
+#undef HAVE_AUG_GET_MACHINE
+
+/* Define to 1 if you have the `auth_hostok' function. */
+#undef HAVE_AUTH_HOSTOK
+
+/* Define to 1 if you have the `auth_timeok' function. */
+#undef HAVE_AUTH_TIMEOK
+
+/* Define to 1 if you have the `b64_ntop' function. */
+#undef HAVE_B64_NTOP
+
+/* Define to 1 if you have the `b64_pton' function. */
+#undef HAVE_B64_PTON
+
+/* Define if you have the basename function. */
+#undef HAVE_BASENAME
+
+/* Define to 1 if you have the `bcopy' function. */
+#undef HAVE_BCOPY
+
+/* Define to 1 if you have the `bcrypt_pbkdf' function. */
+#undef HAVE_BCRYPT_PBKDF
+
+/* Define to 1 if you have the `bindresvport_sa' function. */
+#undef HAVE_BINDRESVPORT_SA
+
+/* Define to 1 if you have the `blf_enc' function. */
+#undef HAVE_BLF_ENC
+
+/* Define to 1 if you have the <blf.h> header file. */
+#undef HAVE_BLF_H
+
+/* Define to 1 if you have the `Blowfish_expand0state' function. */
+#undef HAVE_BLOWFISH_EXPAND0STATE
+
+/* Define to 1 if you have the `Blowfish_expandstate' function. */
+#undef HAVE_BLOWFISH_EXPANDSTATE
+
+/* Define to 1 if you have the `Blowfish_initstate' function. */
+#undef HAVE_BLOWFISH_INITSTATE
+
+/* Define to 1 if you have the `Blowfish_stream2word' function. */
+#undef HAVE_BLOWFISH_STREAM2WORD
+
+/* Define to 1 if you have the `BN_is_prime_ex' function. */
+#undef HAVE_BN_IS_PRIME_EX
+
+/* Define to 1 if you have the <bsd/libutil.h> header file. */
+#undef HAVE_BSD_LIBUTIL_H
+
+/* Define to 1 if you have the <bsm/audit.h> header file. */
+#undef HAVE_BSM_AUDIT_H
+
+/* Define to 1 if you have the <bstring.h> header file. */
+#undef HAVE_BSTRING_H
+
+/* Define to 1 if you have the `bzero' function. */
+#undef HAVE_BZERO
+
+/* calloc(0, x) returns NULL */
+#undef HAVE_CALLOC
+
+/* Define if you have caph_cache_tzdata */
+#undef HAVE_CAPH_CACHE_TZDATA
+
+/* Define to 1 if you have the <capsicum_helpers.h> header file. */
+#undef HAVE_CAPSICUM_HELPERS_H
+
+/* Define to 1 if you have the `cap_rights_limit' function. */
+#undef HAVE_CAP_RIGHTS_LIMIT
+
+/* Define to 1 if you have the `clock' function. */
+#undef HAVE_CLOCK
+
+/* Have clock_gettime */
+#undef HAVE_CLOCK_GETTIME
+
+/* define if you have clock_t data type */
+#undef HAVE_CLOCK_T
+
+/* Define to 1 if you have the `closefrom' function. */
+#undef HAVE_CLOSEFROM
+
+/* Define to 1 if you have the `close_range' function. */
+#undef HAVE_CLOSE_RANGE
+
+/* Define if gai_strerror() returns const char * */
+#undef HAVE_CONST_GAI_STRERROR_PROTO
+
+/* Define if your system uses ancillary data style file descriptor passing */
+#undef HAVE_CONTROL_IN_MSGHDR
+
+/* Define to 1 if you have the `crypt' function. */
+#undef HAVE_CRYPT
+
+/* Define to 1 if you have the <crypto/sha2.h> header file. */
+#undef HAVE_CRYPTO_SHA2_H
+
+/* Define to 1 if you have the <crypt.h> header file. */
+#undef HAVE_CRYPT_H
+
+/* Define if you are on Cygwin */
+#undef HAVE_CYGWIN
+
+/* Define if your libraries define daemon() */
+#undef HAVE_DAEMON
+
+/* Define to 1 if you have the declaration of `AI_NUMERICSERV', and to 0 if
+   you don't. */
+#undef HAVE_DECL_AI_NUMERICSERV
+
+/* Define to 1 if you have the declaration of `authenticate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_AUTHENTICATE
+
+/* Define to 1 if you have the declaration of `bzero', and to 0 if you don't.
+   */
+#undef HAVE_DECL_BZERO
+
+/* Define to 1 if you have the declaration of `ftruncate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_FTRUNCATE
+
+/* Define to 1 if you have the declaration of `getentropy', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETENTROPY
+
+/* Define to 1 if you have the declaration of `getpeereid', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETPEEREID
+
+/* Define to 1 if you have the declaration of `GLOB_NOMATCH', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GLOB_NOMATCH
+
+/* Define to 1 if you have the declaration of `GSS_C_NT_HOSTBASED_SERVICE',
+   and to 0 if you don't. */
+#undef HAVE_DECL_GSS_C_NT_HOSTBASED_SERVICE
+
+/* Define to 1 if you have the declaration of `howmany', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HOWMANY
+
+/* Define to 1 if you have the declaration of `htole64', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HTOLE64
+
+/* Define to 1 if you have the declaration of `h_errno', and to 0 if you
+   don't. */
+#undef HAVE_DECL_H_ERRNO
+
+/* Define to 1 if you have the declaration of `INFINITY', and to 0 if you
+   don't. */
+#undef HAVE_DECL_INFINITY
+
+/* Define to 1 if you have the declaration of `le32toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE32TOH
+
+/* Define to 1 if you have the declaration of `le64toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE64TOH
+
+/* Define to 1 if you have the declaration of `loginfailed', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINFAILED
+
+/* Define to 1 if you have the declaration of `loginrestrictions', and to 0 if
+   you don't. */
+#undef HAVE_DECL_LOGINRESTRICTIONS
+
+/* Define to 1 if you have the declaration of `loginsuccess', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINSUCCESS
+
+/* Define to 1 if you have the declaration of `MAXSYMLINKS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_MAXSYMLINKS
+
+/* Define to 1 if you have the declaration of `memmem', and to 0 if you don't.
+   */
+#undef HAVE_DECL_MEMMEM
+
+/* Define to 1 if you have the declaration of `NFDBITS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_NFDBITS
+
+/* Define to 1 if you have the declaration of `offsetof', and to 0 if you
+   don't. */
+#undef HAVE_DECL_OFFSETOF
+
+/* Define to 1 if you have the declaration of `O_NONBLOCK', and to 0 if you
+   don't. */
+#undef HAVE_DECL_O_NONBLOCK
+
+/* Define to 1 if you have the declaration of `passwdexpired', and to 0 if you
+   don't. */
+#undef HAVE_DECL_PASSWDEXPIRED
+
+/* Define to 1 if you have the declaration of `readv', and to 0 if you don't.
+   */
+#undef HAVE_DECL_READV
+
+/* Define to 1 if you have the declaration of `setauthdb', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SETAUTHDB
+
+/* Define to 1 if you have the declaration of `SHUT_RD', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SHUT_RD
+
+/* Define to 1 if you have the declaration of `UINT32_MAX', and to 0 if you
+   don't. */
+#undef HAVE_DECL_UINT32_MAX
+
+/* Define to 1 if you have the declaration of `writev', and to 0 if you don't.
+   */
+#undef HAVE_DECL_WRITEV
+
+/* Define to 1 if you have the declaration of `_getlong', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETLONG
+
+/* Define to 1 if you have the declaration of `_getshort', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETSHORT
+
+/* Define to 1 if you have the declaration of `__builtin_inff', and to 0 if
+   you don't. */
+#undef HAVE_DECL___BUILTIN_INFF
+
+/* Define to 1 if you have the `DES_crypt' function. */
+#undef HAVE_DES_CRYPT
+
+/* Define if you have /dev/ptmx */
+#undef HAVE_DEV_PTMX
+
+/* Define if you have /dev/ptc */
+#undef HAVE_DEV_PTS_AND_PTC
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the `dirfd' function. */
+#undef HAVE_DIRFD
+
+/* Define to 1 if you have the `dirname' function. */
+#undef HAVE_DIRNAME
+
+/* Define to 1 if you have the `dlopen' function. */
+#undef HAVE_DLOPEN
+
+/* Define to 1 if you have the `EC_KEY_METHOD_new' function. */
+#undef HAVE_EC_KEY_METHOD_NEW
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates' function. */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates' function. */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the <elf.h> header file. */
+#undef HAVE_ELF_H
+
+/* Define to 1 if you have the `endgrent' function. */
+#undef HAVE_ENDGRENT
+
+/* Define to 1 if you have the <endian.h> header file. */
+#undef HAVE_ENDIAN_H
+
+/* Define to 1 if you have the `endutent' function. */
+#undef HAVE_ENDUTENT
+
+/* Define to 1 if you have the `endutxent' function. */
+#undef HAVE_ENDUTXENT
+
+/* Define to 1 if you have the `err' function. */
+#undef HAVE_ERR
+
+/* Define to 1 if you have the `errx' function. */
+#undef HAVE_ERRX
+
+/* Define to 1 if you have the <err.h> header file. */
+#undef HAVE_ERR_H
+
+/* Define if your system has /etc/default/login */
+#undef HAVE_ETC_DEFAULT_LOGIN
+
+/* Define to 1 if you have the `EVP_chacha20' function. */
+#undef HAVE_EVP_CHACHA20
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_updated_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_UPDATED_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv_noconst' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV_NOCONST
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_set_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_SET_IV
+
+/* Define to 1 if you have the `EVP_DigestFinal_ex' function. */
+#undef HAVE_EVP_DIGESTFINAL_EX
+
+/* Define to 1 if you have the `EVP_DigestInit_ex' function. */
+#undef HAVE_EVP_DIGESTINIT_EX
+
+/* Define to 1 if you have the `EVP_DigestSign' function. */
+#undef HAVE_EVP_DIGESTSIGN
+
+/* Define to 1 if you have the `EVP_DigestVerify' function. */
+#undef HAVE_EVP_DIGESTVERIFY
+
+/* Define to 1 if you have the `EVP_MD_CTX_cleanup' function. */
+#undef HAVE_EVP_MD_CTX_CLEANUP
+
+/* Define to 1 if you have the `EVP_MD_CTX_copy_ex' function. */
+#undef HAVE_EVP_MD_CTX_COPY_EX
+
+/* Define to 1 if you have the `EVP_MD_CTX_init' function. */
+#undef HAVE_EVP_MD_CTX_INIT
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_private_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PRIVATE_KEY
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_public_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PUBLIC_KEY
+
+/* Define to 1 if you have the `EVP_sha256' function. */
+#undef HAVE_EVP_SHA256
+
+/* Define to 1 if you have the `EVP_sha384' function. */
+#undef HAVE_EVP_SHA384
+
+/* Define to 1 if you have the `EVP_sha512' function. */
+#undef HAVE_EVP_SHA512
+
+/* Define if you have ut_exit in utmp.h */
+#undef HAVE_EXIT_IN_UTMP
+
+/* Define to 1 if you have the `explicit_bzero' function. */
+#undef HAVE_EXPLICIT_BZERO
+
+/* Define to 1 if you have the `explicit_memset' function. */
+#undef HAVE_EXPLICIT_MEMSET
+
+/* Define to 1 if you have the `fchmod' function. */
+#undef HAVE_FCHMOD
+
+/* Define to 1 if you have the `fchmodat' function. */
+#undef HAVE_FCHMODAT
+
+/* Define to 1 if you have the `fchown' function. */
+#undef HAVE_FCHOWN
+
+/* Define to 1 if you have the `fchownat' function. */
+#undef HAVE_FCHOWNAT
+
+/* Use F_CLOSEM fcntl for closefrom */
+#undef HAVE_FCNTL_CLOSEM
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if the system has the type `fd_mask'. */
+#undef HAVE_FD_MASK
+
+/* Define to 1 if you have the <features.h> header file. */
+#undef HAVE_FEATURES_H
+
+/* Define to 1 if you have the `fido_assert_set_clientdata' function. */
+#undef HAVE_FIDO_ASSERT_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_prot' function. */
+#undef HAVE_FIDO_CRED_PROT
+
+/* Define to 1 if you have the `fido_cred_set_clientdata' function. */
+#undef HAVE_FIDO_CRED_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_set_prot' function. */
+#undef HAVE_FIDO_CRED_SET_PROT
+
+/* Define to 1 if you have the `fido_dev_get_touch_begin' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_BEGIN
+
+/* Define to 1 if you have the `fido_dev_get_touch_status' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_STATUS
+
+/* Define to 1 if you have the `fido_dev_is_winhello' function. */
+#undef HAVE_FIDO_DEV_IS_WINHELLO
+
+/* Define to 1 if you have the `fido_dev_supports_cred_prot' function. */
+#undef HAVE_FIDO_DEV_SUPPORTS_CRED_PROT
+
+/* Define to 1 if you have the <floatingpoint.h> header file. */
+#undef HAVE_FLOATINGPOINT_H
+
+/* Define to 1 if you have the `flock' function. */
+#undef HAVE_FLOCK
+
+/* Define to 1 if you have the `fmt_scaled' function. */
+#undef HAVE_FMT_SCALED
+
+/* Define to 1 if you have the `fnmatch' function. */
+#undef HAVE_FNMATCH
+
+/* Define to 1 if you have the <fnmatch.h> header file. */
+#undef HAVE_FNMATCH_H
+
+/* Define to 1 if you have the `freeaddrinfo' function. */
+#undef HAVE_FREEADDRINFO
+
+/* Define to 1 if you have the `freezero' function. */
+#undef HAVE_FREEZERO
+
+/* Define to 1 if the system has the type `fsblkcnt_t'. */
+#undef HAVE_FSBLKCNT_T
+
+/* Define to 1 if the system has the type `fsfilcnt_t'. */
+#undef HAVE_FSFILCNT_T
+
+/* Define to 1 if you have the `fstatat' function. */
+#undef HAVE_FSTATAT
+
+/* Define to 1 if you have the `fstatfs' function. */
+#undef HAVE_FSTATFS
+
+/* Define to 1 if you have the `fstatvfs' function. */
+#undef HAVE_FSTATVFS
+
+/* Define to 1 if you have the `futimes' function. */
+#undef HAVE_FUTIMES
+
+/* Define to 1 if you have the `gai_strerror' function. */
+#undef HAVE_GAI_STRERROR
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+#undef HAVE_GETADDRINFO
+
+/* Define to 1 if you have the `getaudit' function. */
+#undef HAVE_GETAUDIT
+
+/* Define to 1 if you have the `getaudit_addr' function. */
+#undef HAVE_GETAUDIT_ADDR
+
+/* Define to 1 if you have the `getcwd' function. */
+#undef HAVE_GETCWD
+
+/* Define to 1 if you have the `getentropy' function. */
+#undef HAVE_GETENTROPY
+
+/* Define to 1 if you have the `getgrouplist' function. */
+#undef HAVE_GETGROUPLIST
+
+/* Define to 1 if you have the `getgrset' function. */
+#undef HAVE_GETGRSET
+
+/* Define to 1 if you have the `getlastlogxbyname' function. */
+#undef HAVE_GETLASTLOGXBYNAME
+
+/* Define to 1 if you have the `getline' function. */
+#undef HAVE_GETLINE
+
+/* Define to 1 if you have the `getluid' function. */
+#undef HAVE_GETLUID
+
+/* Define to 1 if you have the `getnameinfo' function. */
+#undef HAVE_GETNAMEINFO
+
+/* Define to 1 if you have the `getopt' function. */
+#undef HAVE_GETOPT
+
+/* Define to 1 if you have the <getopt.h> header file. */
+#undef HAVE_GETOPT_H
+
+/* Define if your getopt(3) defines and uses optreset */
+#undef HAVE_GETOPT_OPTRESET
+
+/* Define if your libraries define getpagesize() */
+#undef HAVE_GETPAGESIZE
+
+/* Define to 1 if you have the `getpeereid' function. */
+#undef HAVE_GETPEEREID
+
+/* Define to 1 if you have the `getpeerucred' function. */
+#undef HAVE_GETPEERUCRED
+
+/* Define to 1 if you have the `getpgid' function. */
+#undef HAVE_GETPGID
+
+/* Define to 1 if you have the `getpgrp' function. */
+#undef HAVE_GETPGRP
+
+/* Define to 1 if you have the `getpwanam' function. */
+#undef HAVE_GETPWANAM
+
+/* Define to 1 if you have the `getrandom' function. */
+#undef HAVE_GETRANDOM
+
+/* Define to 1 if you have the `getrlimit' function. */
+#undef HAVE_GETRLIMIT
+
+/* Define if getrrsetbyname() exists */
+#undef HAVE_GETRRSETBYNAME
+
+/* Define to 1 if you have the `getseuserbyname' function. */
+#undef HAVE_GETSEUSERBYNAME
+
+/* Define to 1 if you have the `getsid' function. */
+#undef HAVE_GETSID
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define to 1 if you have the `getttyent' function. */
+#undef HAVE_GETTTYENT
+
+/* Define to 1 if you have the `getutent' function. */
+#undef HAVE_GETUTENT
+
+/* Define to 1 if you have the `getutid' function. */
+#undef HAVE_GETUTID
+
+/* Define to 1 if you have the `getutline' function. */
+#undef HAVE_GETUTLINE
+
+/* Define to 1 if you have the `getutxent' function. */
+#undef HAVE_GETUTXENT
+
+/* Define to 1 if you have the `getutxid' function. */
+#undef HAVE_GETUTXID
+
+/* Define to 1 if you have the `getutxline' function. */
+#undef HAVE_GETUTXLINE
+
+/* Define to 1 if you have the `getutxuser' function. */
+#undef HAVE_GETUTXUSER
+
+/* Define to 1 if you have the `get_default_context_with_level' function. */
+#undef HAVE_GET_DEFAULT_CONTEXT_WITH_LEVEL
+
+/* Define to 1 if you have the `glob' function. */
+#undef HAVE_GLOB
+
+/* Define to 1 if you have the <glob.h> header file. */
+#undef HAVE_GLOB_H
+
+/* Define to 1 if you have the `group_from_gid' function. */
+#undef HAVE_GROUP_FROM_GID
+
+/* Define to 1 if you have the <gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi/gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_KRB5_H
+
+/* Define to 1 if you have the <gssapi.h> header file. */
+#undef HAVE_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_KRB5_H
+
+/* Define if HEADER.ad exists in arpa/nameser.h */
+#undef HAVE_HEADER_AD
+
+/* Define to 1 if you have the `HMAC_CTX_init' function. */
+#undef HAVE_HMAC_CTX_INIT
+
+/* Define if you have ut_host in utmp.h */
+#undef HAVE_HOST_IN_UTMP
+
+/* Define if you have ut_host in utmpx.h */
+#undef HAVE_HOST_IN_UTMPX
+
+/* Define to 1 if you have the <iaf.h> header file. */
+#undef HAVE_IAF_H
+
+/* Define to 1 if you have the <ia.h> header file. */
+#undef HAVE_IA_H
+
+/* Define if you have ut_id in utmp.h */
+#undef HAVE_ID_IN_UTMP
+
+/* Define if you have ut_id in utmpx.h */
+#undef HAVE_ID_IN_UTMPX
+
+/* Define to 1 if you have the <ifaddrs.h> header file. */
+#undef HAVE_IFADDRS_H
+
+/* Define to 1 if you have the `inet_aton' function. */
+#undef HAVE_INET_ATON
+
+/* Define to 1 if you have the `inet_ntoa' function. */
+#undef HAVE_INET_NTOA
+
+/* Define to 1 if you have the `inet_ntop' function. */
+#undef HAVE_INET_NTOP
+
+/* Define to 1 if you have the `innetgr' function. */
+#undef HAVE_INNETGR
+
+/* define if you have int64_t data type */
+#undef HAVE_INT64_T
+
+/* Define to 1 if the system has the type `intmax_t'. */
+#undef HAVE_INTMAX_T
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* define if you have intxx_t data type */
+#undef HAVE_INTXX_T
+
+/* Define to 1 if the system has the type `in_addr_t'. */
+#undef HAVE_IN_ADDR_T
+
+/* Define to 1 if the system has the type `in_port_t'. */
+#undef HAVE_IN_PORT_T
+
+/* Define if you have isblank(3C). */
+#undef HAVE_ISBLANK
+
+/* Define to 1 if you have the `killpg' function. */
+#undef HAVE_KILLPG
+
+/* Define to 1 if you have the `krb5_cc_new_unique' function. */
+#undef HAVE_KRB5_CC_NEW_UNIQUE
+
+/* Define to 1 if you have the `krb5_free_error_message' function. */
+#undef HAVE_KRB5_FREE_ERROR_MESSAGE
+
+/* Define to 1 if you have the `krb5_get_error_message' function. */
+#undef HAVE_KRB5_GET_ERROR_MESSAGE
+
+/* Define to 1 if you have the <langinfo.h> header file. */
+#undef HAVE_LANGINFO_H
+
+/* Define to 1 if you have the <lastlog.h> header file. */
+#undef HAVE_LASTLOG_H
+
+/* Define if you want ldns support */
+#undef HAVE_LDNS
+
+/* Define to 1 if you have the <libaudit.h> header file. */
+#undef HAVE_LIBAUDIT_H
+
+/* Define to 1 if you have the `bsm' library (-lbsm). */
+#undef HAVE_LIBBSM
+
+/* Define to 1 if you have the `dl' library (-ldl). */
+#undef HAVE_LIBDL
+
+/* Define to 1 if you have the <libgen.h> header file. */
+#undef HAVE_LIBGEN_H
+
+/* Define if system has libiaf that supports set_id */
+#undef HAVE_LIBIAF
+
+/* Define to 1 if you have the `network' library (-lnetwork). */
+#undef HAVE_LIBNETWORK
+
+/* Define to 1 if you have the `pam' library (-lpam). */
+#undef HAVE_LIBPAM
+
+/* Define to 1 if you have the <libproc.h> header file. */
+#undef HAVE_LIBPROC_H
+
+/* Define to 1 if you have the `socket' library (-lsocket). */
+#undef HAVE_LIBSOCKET
+
+/* Define to 1 if you have the <libutil.h> header file. */
+#undef HAVE_LIBUTIL_H
+
+/* Define to 1 if you have the `xnet' library (-lxnet). */
+#undef HAVE_LIBXNET
+
+/* Define to 1 if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <linux/audit.h> header file. */
+#undef HAVE_LINUX_AUDIT_H
+
+/* Define to 1 if you have the <linux/filter.h> header file. */
+#undef HAVE_LINUX_FILTER_H
+
+/* Define to 1 if you have the <linux/if_tun.h> header file. */
+#undef HAVE_LINUX_IF_TUN_H
+
+/* Define to 1 if you have the <linux/seccomp.h> header file. */
+#undef HAVE_LINUX_SECCOMP_H
+
+/* Define to 1 if you have the `llabs' function. */
+#undef HAVE_LLABS
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the `localtime_r' function. */
+#undef HAVE_LOCALTIME_R
+
+/* Define to 1 if you have the `login' function. */
+#undef HAVE_LOGIN
+
+/* Define to 1 if you have the <login_cap.h> header file. */
+#undef HAVE_LOGIN_CAP_H
+
+/* Define to 1 if you have the `login_getcapbool' function. */
+#undef HAVE_LOGIN_GETCAPBOOL
+
+/* Define to 1 if you have the `login_getpwclass' function. */
+#undef HAVE_LOGIN_GETPWCLASS
+
+/* Define to 1 if you have the <login.h> header file. */
+#undef HAVE_LOGIN_H
+
+/* Define to 1 if you have the `logout' function. */
+#undef HAVE_LOGOUT
+
+/* Define to 1 if you have the `logwtmp' function. */
+#undef HAVE_LOGWTMP
+
+/* Define to 1 if the system has the type `long double'. */
+#undef HAVE_LONG_DOUBLE
+
+/* Define to 1 if the system has the type `long long'. */
+#undef HAVE_LONG_LONG
+
+/* Define to 1 if you have the <maillock.h> header file. */
+#undef HAVE_MAILLOCK_H
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+   to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the `mblen' function. */
+#undef HAVE_MBLEN
+
+/* Define to 1 if you have the `mbtowc' function. */
+#undef HAVE_MBTOWC
+
+/* Define to 1 if you have the `memmem' function. */
+#undef HAVE_MEMMEM
+
+/* Define to 1 if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define to 1 if you have the `memset_s' function. */
+#undef HAVE_MEMSET_S
+
+/* Define to 1 if you have the `mkdtemp' function. */
+#undef HAVE_MKDTEMP
+
+/* Define to 1 if you have the `mmap' function. */
+#undef HAVE_MMAP
+
+/* define if you have mode_t data type */
+#undef HAVE_MODE_T
+
+/* Some systems put nanosleep outside of libc */
+#undef HAVE_NANOSLEEP
+
+/* Define to 1 if you have the <ndir.h> header file. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the <netdb.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define to 1 if you have the <netgroup.h> header file. */
+#undef HAVE_NETGROUP_H
+
+/* Define to 1 if you have the <net/if_tun.h> header file. */
+#undef HAVE_NET_IF_TUN_H
+
+/* Define to 1 if you have the <net/route.h> header file. */
+#undef HAVE_NET_ROUTE_H
+
+/* Define if you are on NeXT */
+#undef HAVE_NEXT
+
+/* Define to 1 if the system has the type `nfds_t'. */
+#undef HAVE_NFDS_T
+
+/* Define to 1 if you have the `ngetaddrinfo' function. */
+#undef HAVE_NGETADDRINFO
+
+/* Define to 1 if you have the `nlist' function. */
+#undef HAVE_NLIST
+
+/* Define to 1 if you have the <nlist.h> header file. */
+#undef HAVE_NLIST_H
+
+/* Define to 1 if you have the `nl_langinfo' function. */
+#undef HAVE_NL_LANGINFO
+
+/* Define to 1 if you have the `nsleep' function. */
+#undef HAVE_NSLEEP
+
+/* Define to 1 if you have the `ogetaddrinfo' function. */
+#undef HAVE_OGETADDRINFO
+
+/* Define if you have an old version of PAM which takes only one argument to
+   pam_strerror */
+#undef HAVE_OLD_PAM
+
+/* Define to 1 if you have the `openlog_r' function. */
+#undef HAVE_OPENLOG_R
+
+/* Define to 1 if you have the `openpty' function. */
+#undef HAVE_OPENPTY
+
+/* Define to 1 if you have the `OpenSSL_version' function. */
+#undef HAVE_OPENSSL_VERSION
+
+/* Define to 1 if you have the `OpenSSL_version_num' function. */
+#undef HAVE_OPENSSL_VERSION_NUM
+
+/* Define if you have Digital Unix Security Integration Architecture */
+#undef HAVE_OSF_SIA
+
+/* Define to 1 if you have the `pam_getenvlist' function. */
+#undef HAVE_PAM_GETENVLIST
+
+/* Define to 1 if you have the <pam/pam_appl.h> header file. */
+#undef HAVE_PAM_PAM_APPL_H
+
+/* Define to 1 if you have the `pam_putenv' function. */
+#undef HAVE_PAM_PUTENV
+
+/* Define to 1 if you have the <paths.h> header file. */
+#undef HAVE_PATHS_H
+
+/* Define if you have ut_pid in utmp.h */
+#undef HAVE_PID_IN_UTMP
+
+/* define if you have pid_t data type */
+#undef HAVE_PID_T
+
+/* Define to 1 if you have the `pledge' function. */
+#undef HAVE_PLEDGE
+
+/* Define to 1 if you have the `poll' function. */
+#undef HAVE_POLL
+
+/* Define to 1 if you have the <poll.h> header file. */
+#undef HAVE_POLL_H
+
+/* Define to 1 if you have the `ppoll' function. */
+#undef HAVE_PPOLL
+
+/* Define to 1 if you have the `prctl' function. */
+#undef HAVE_PRCTL
+
+/* Define to 1 if you have the `priv_basicset' function. */
+#undef HAVE_PRIV_BASICSET
+
+/* Define to 1 if you have the <priv.h> header file. */
+#undef HAVE_PRIV_H
+
+/* Define to 1 if you have the `procctl' function. */
+#undef HAVE_PROCCTL
+
+/* Define if you have /proc/$pid/fd */
+#undef HAVE_PROC_PID
+
+/* Define to 1 if you have the `proc_pidinfo' function. */
+#undef HAVE_PROC_PIDINFO
+
+/* Define to 1 if you have the `pselect' function. */
+#undef HAVE_PSELECT
+
+/* Define to 1 if you have the `pstat' function. */
+#undef HAVE_PSTAT
+
+/* Define to 1 if you have the <pty.h> header file. */
+#undef HAVE_PTY_H
+
+/* Define to 1 if you have the `pututline' function. */
+#undef HAVE_PUTUTLINE
+
+/* Define to 1 if you have the `pututxline' function. */
+#undef HAVE_PUTUTXLINE
+
+/* Define to 1 if you have the `raise' function. */
+#undef HAVE_RAISE
+
+/* Define to 1 if you have the `readpassphrase' function. */
+#undef HAVE_READPASSPHRASE
+
+/* Define to 1 if you have the <readpassphrase.h> header file. */
+#undef HAVE_READPASSPHRASE_H
+
+/* Define to 1 if your system has a GNU libc compatible `realloc' function,
+   and to 0 otherwise. */
+#undef HAVE_REALLOC
+
+/* Define to 1 if you have the `reallocarray' function. */
+#undef HAVE_REALLOCARRAY
+
+/* Define to 1 if you have the `realpath' function. */
+#undef HAVE_REALPATH
+
+/* Define to 1 if you have the `recallocarray' function. */
+#undef HAVE_RECALLOCARRAY
+
+/* Define to 1 if you have the `recvmsg' function. */
+#undef HAVE_RECVMSG
+
+/* sys/resource.h has RLIMIT_NPROC */
+#undef HAVE_RLIMIT_NPROC
+
+/* Define to 1 if you have the <rpc/types.h> header file. */
+#undef HAVE_RPC_TYPES_H
+
+/* Define to 1 if you have the `rresvport_af' function. */
+#undef HAVE_RRESVPORT_AF
+
+/* Define to 1 if you have the `RSA_generate_key_ex' function. */
+#undef HAVE_RSA_GENERATE_KEY_EX
+
+/* Define to 1 if you have the `RSA_get_default_method' function. */
+#undef HAVE_RSA_GET_DEFAULT_METHOD
+
+/* Define to 1 if you have the <sandbox.h> header file. */
+#undef HAVE_SANDBOX_H
+
+/* Define to 1 if you have the `sandbox_init' function. */
+#undef HAVE_SANDBOX_INIT
+
+/* define if you have sa_family_t data type */
+#undef HAVE_SA_FAMILY_T
+
+/* Define to 1 if you have the `scan_scaled' function. */
+#undef HAVE_SCAN_SCALED
+
+/* Define if you have SecureWare-based protected password database */
+#undef HAVE_SECUREWARE
+
+/* Define to 1 if you have the <security/pam_appl.h> header file. */
+#undef HAVE_SECURITY_PAM_APPL_H
+
+/* Define to 1 if you have the `sendmsg' function. */
+#undef HAVE_SENDMSG
+
+/* Define to 1 if you have the `setauthdb' function. */
+#undef HAVE_SETAUTHDB
+
+/* Define to 1 if you have the `setdtablesize' function. */
+#undef HAVE_SETDTABLESIZE
+
+/* Define to 1 if you have the `setegid' function. */
+#undef HAVE_SETEGID
+
+/* Define to 1 if you have the `setenv' function. */
+#undef HAVE_SETENV
+
+/* Define to 1 if you have the `seteuid' function. */
+#undef HAVE_SETEUID
+
+/* Define to 1 if you have the `setgroupent' function. */
+#undef HAVE_SETGROUPENT
+
+/* Define to 1 if you have the `setgroups' function. */
+#undef HAVE_SETGROUPS
+
+/* Define to 1 if you have the `setlinebuf' function. */
+#undef HAVE_SETLINEBUF
+
+/* Define to 1 if you have the `setlogin' function. */
+#undef HAVE_SETLOGIN
+
+/* Define to 1 if you have the `setluid' function. */
+#undef HAVE_SETLUID
+
+/* Define to 1 if you have the `setpassent' function. */
+#undef HAVE_SETPASSENT
+
+/* Define to 1 if you have the `setpcred' function. */
+#undef HAVE_SETPCRED
+
+/* Define to 1 if you have the `setpflags' function. */
+#undef HAVE_SETPFLAGS
+
+/* Define to 1 if you have the `setppriv' function. */
+#undef HAVE_SETPPRIV
+
+/* Define to 1 if you have the `setproctitle' function. */
+#undef HAVE_SETPROCTITLE
+
+/* Define to 1 if you have the `setregid' function. */
+#undef HAVE_SETREGID
+
+/* Define to 1 if you have the `setresgid' function. */
+#undef HAVE_SETRESGID
+
+/* Define to 1 if you have the `setresuid' function. */
+#undef HAVE_SETRESUID
+
+/* Define to 1 if you have the `setreuid' function. */
+#undef HAVE_SETREUID
+
+/* Define to 1 if you have the `setrlimit' function. */
+#undef HAVE_SETRLIMIT
+
+/* Define to 1 if you have the `setsid' function. */
+#undef HAVE_SETSID
+
+/* Define to 1 if you have the `setutent' function. */
+#undef HAVE_SETUTENT
+
+/* Define to 1 if you have the `setutxdb' function. */
+#undef HAVE_SETUTXDB
+
+/* Define to 1 if you have the `setutxent' function. */
+#undef HAVE_SETUTXENT
+
+/* Define to 1 if you have the `setvbuf' function. */
+#undef HAVE_SETVBUF
+
+/* Define to 1 if you have the `set_id' function. */
+#undef HAVE_SET_ID
+
+/* Define to 1 if you have the `SHA256Update' function. */
+#undef HAVE_SHA256UPDATE
+
+/* Define to 1 if you have the <sha2.h> header file. */
+#undef HAVE_SHA2_H
+
+/* Define to 1 if you have the `SHA384Update' function. */
+#undef HAVE_SHA384UPDATE
+
+/* Define to 1 if you have the `SHA512Update' function. */
+#undef HAVE_SHA512UPDATE
+
+/* Define to 1 if you have the <shadow.h> header file. */
+#undef HAVE_SHADOW_H
+
+/* Define to 1 if you have the `sigaction' function. */
+#undef HAVE_SIGACTION
+
+/* Define to 1 if the system has the type `sighandler_t'. */
+#undef HAVE_SIGHANDLER_T
+
+/* Define to 1 if you have the `sigvec' function. */
+#undef HAVE_SIGVEC
+
+/* Define to 1 if the system has the type `sig_atomic_t'. */
+#undef HAVE_SIG_ATOMIC_T
+
+/* define if you have size_t data type */
+#undef HAVE_SIZE_T
+
+/* Define to 1 if you have the `snprintf' function. */
+#undef HAVE_SNPRINTF
+
+/* Define to 1 if you have the `socketpair' function. */
+#undef HAVE_SOCKETPAIR
+
+/* Have PEERCRED socket option */
+#undef HAVE_SO_PEERCRED
+
+/* define if you have ssize_t data type */
+#undef HAVE_SSIZE_T
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE_SS_FAMILY_IN_SS
+
+/* Define if you have ut_ss in utmpx.h */
+#undef HAVE_SS_IN_UTMPX
+
+/* Define to 1 if you have the `statfs' function. */
+#undef HAVE_STATFS
+
+/* Define to 1 if you have the `statvfs' function. */
+#undef HAVE_STATVFS
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#undef HAVE_STDIO_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasestr' function. */
+#undef HAVE_STRCASESTR
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the `strftime' function. */
+#undef HAVE_STRFTIME
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcat' function. */
+#undef HAVE_STRLCAT
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if you have the `strmode' function. */
+#undef HAVE_STRMODE
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
+/* Define to 1 if you have the `strnvis' function. */
+#undef HAVE_STRNVIS
+
+/* Define to 1 if you have the `strptime' function. */
+#undef HAVE_STRPTIME
+
+/* Define to 1 if you have the `strsep' function. */
+#undef HAVE_STRSEP
+
+/* Define to 1 if you have the `strsignal' function. */
+#undef HAVE_STRSIGNAL
+
+/* Define to 1 if you have the `strtoll' function. */
+#undef HAVE_STRTOLL
+
+/* Define to 1 if you have the `strtonum' function. */
+#undef HAVE_STRTONUM
+
+/* Define to 1 if you have the `strtoul' function. */
+#undef HAVE_STRTOUL
+
+/* Define to 1 if you have the `strtoull' function. */
+#undef HAVE_STRTOULL
+
+/* define if you have struct addrinfo data type */
+#undef HAVE_STRUCT_ADDRINFO
+
+/* Define to 1 if `d_type' is a member of `struct dirent'. */
+#undef HAVE_STRUCT_DIRENT_D_TYPE
+
+/* define if you have struct in6_addr data type */
+#undef HAVE_STRUCT_IN6_ADDR
+
+/* Define to 1 if `pw_change' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CHANGE
+
+/* Define to 1 if `pw_class' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CLASS
+
+/* Define to 1 if `pw_expire' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_EXPIRE
+
+/* Define to 1 if `pw_gecos' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_GECOS
+
+/* Define to 1 if `fd' is a member of `struct pollfd'. */
+#undef HAVE_STRUCT_POLLFD_FD
+
+/* define if you have struct sockaddr_in6 data type */
+#undef HAVE_STRUCT_SOCKADDR_IN6
+
+/* Define to 1 if `sin6_scope_id' is a member of `struct sockaddr_in6'. */
+#undef HAVE_STRUCT_SOCKADDR_IN6_SIN6_SCOPE_ID
+
+/* define if you have struct sockaddr_storage data type */
+#undef HAVE_STRUCT_SOCKADDR_STORAGE
+
+/* Define to 1 if `f_files' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FILES
+
+/* Define to 1 if `f_flags' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FLAGS
+
+/* Define to 1 if `st_blksize' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_BLKSIZE
+
+/* Define to 1 if `st_mtim' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIM
+
+/* Define to 1 if `st_mtime' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIME
+
+/* define if you have struct timespec */
+#undef HAVE_STRUCT_TIMESPEC
+
+/* define if you have struct timeval */
+#undef HAVE_STRUCT_TIMEVAL
+
+/* Define to 1 if you have the `sysconf' function. */
+#undef HAVE_SYSCONF
+
+/* Define if you have syslen in utmpx.h */
+#undef HAVE_SYSLEN_IN_UTMPX
+
+/* Define to 1 if you have the <sys/audit.h> header file. */
+#undef HAVE_SYS_AUDIT_H
+
+/* Define to 1 if you have the <sys/bitypes.h> header file. */
+#undef HAVE_SYS_BITYPES_H
+
+/* Define to 1 if you have the <sys/bsdtty.h> header file. */
+#undef HAVE_SYS_BSDTTY_H
+
+/* Define to 1 if you have the <sys/byteorder.h> header file. */
+#undef HAVE_SYS_BYTEORDER_H
+
+/* Define to 1 if you have the <sys/capsicum.h> header file. */
+#undef HAVE_SYS_CAPSICUM_H
+
+/* Define to 1 if you have the <sys/cdefs.h> header file. */
+#undef HAVE_SYS_CDEFS_H
+
+/* Define to 1 if you have the <sys/dir.h> header file. */
+#undef HAVE_SYS_DIR_H
+
+/* Define if your system defines sys_errlist[] */
+#undef HAVE_SYS_ERRLIST
+
+/* Define to 1 if you have the <sys/file.h> header file. */
+#undef HAVE_SYS_FILE_H
+
+/* Define to 1 if you have the <sys/label.h> header file. */
+#undef HAVE_SYS_LABEL_H
+
+/* Define to 1 if you have the <sys/mman.h> header file. */
+#undef HAVE_SYS_MMAN_H
+
+/* Define to 1 if you have the <sys/mount.h> header file. */
+#undef HAVE_SYS_MOUNT_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file. */
+#undef HAVE_SYS_NDIR_H
+
+/* Define if your system defines sys_nerr */
+#undef HAVE_SYS_NERR
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/poll.h> header file. */
+#undef HAVE_SYS_POLL_H
+
+/* Define to 1 if you have the <sys/prctl.h> header file. */
+#undef HAVE_SYS_PRCTL_H
+
+/* Define to 1 if you have the <sys/procctl.h> header file. */
+#undef HAVE_SYS_PROCCTL_H
+
+/* Define to 1 if you have the <sys/pstat.h> header file. */
+#undef HAVE_SYS_PSTAT_H
+
+/* Define to 1 if you have the <sys/ptms.h> header file. */
+#undef HAVE_SYS_PTMS_H
+
+/* Define to 1 if you have the <sys/ptrace.h> header file. */
+#undef HAVE_SYS_PTRACE_H
+
+/* Define to 1 if you have the <sys/random.h> header file. */
+#undef HAVE_SYS_RANDOM_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/statvfs.h> header file. */
+#undef HAVE_SYS_STATVFS_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/stream.h> header file. */
+#undef HAVE_SYS_STREAM_H
+
+/* Define to 1 if you have the <sys/stropts.h> header file. */
+#undef HAVE_SYS_STROPTS_H
+
+/* Define to 1 if you have the <sys/strtio.h> header file. */
+#undef HAVE_SYS_STRTIO_H
+
+/* Define to 1 if you have the <sys/sysctl.h> header file. */
+#undef HAVE_SYS_SYSCTL_H
+
+/* Force use of sys/syslog.h on Ultrix */
+#undef HAVE_SYS_SYSLOG_H
+
+/* Define to 1 if you have the <sys/sysmacros.h> header file. */
+#undef HAVE_SYS_SYSMACROS_H
+
+/* Define to 1 if you have the <sys/timers.h> header file. */
+#undef HAVE_SYS_TIMERS_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/un.h> header file. */
+#undef HAVE_SYS_UN_H
+
+/* Define to 1 if you have the <sys/vfs.h> header file. */
+#undef HAVE_SYS_VFS_H
+
+/* Define to 1 if you have the `tcgetpgrp' function. */
+#undef HAVE_TCGETPGRP
+
+/* Define to 1 if you have the `tcsendbreak' function. */
+#undef HAVE_TCSENDBREAK
+
+/* Define to 1 if you have the `time' function. */
+#undef HAVE_TIME
+
+/* Define to 1 if you have the `timegm' function. */
+#undef HAVE_TIMEGM
+
+/* Define to 1 if you have the <time.h> header file. */
+#undef HAVE_TIME_H
+
+/* Define if you have ut_time in utmp.h */
+#undef HAVE_TIME_IN_UTMP
+
+/* Define if you have ut_time in utmpx.h */
+#undef HAVE_TIME_IN_UTMPX
+
+/* Define to 1 if you have the `timingsafe_bcmp' function. */
+#undef HAVE_TIMINGSAFE_BCMP
+
+/* Define to 1 if you have the <tmpdir.h> header file. */
+#undef HAVE_TMPDIR_H
+
+/* Define to 1 if you have the `truncate' function. */
+#undef HAVE_TRUNCATE
+
+/* Define to 1 if you have the <ttyent.h> header file. */
+#undef HAVE_TTYENT_H
+
+/* Define if you have ut_tv in utmp.h */
+#undef HAVE_TV_IN_UTMP
+
+/* Define if you have ut_tv in utmpx.h */
+#undef HAVE_TV_IN_UTMPX
+
+/* Define if you have ut_type in utmp.h */
+#undef HAVE_TYPE_IN_UTMP
+
+/* Define if you have ut_type in utmpx.h */
+#undef HAVE_TYPE_IN_UTMPX
+
+/* Define to 1 if you have the <ucred.h> header file. */
+#undef HAVE_UCRED_H
+
+/* Define to 1 if the system has the type `uintmax_t'. */
+#undef HAVE_UINTMAX_T
+
+/* define if you have uintxx_t data type */
+#undef HAVE_UINTXX_T
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `unlinkat' function. */
+#undef HAVE_UNLINKAT
+
+/* Define to 1 if you have the `unsetenv' function. */
+#undef HAVE_UNSETENV
+
+/* Define to 1 if the system has the type `unsigned long long'. */
+#undef HAVE_UNSIGNED_LONG_LONG
+
+/* Define to 1 if you have the `unveil' function. */
+#undef HAVE_UNVEIL
+
+/* Define to 1 if you have the `updwtmp' function. */
+#undef HAVE_UPDWTMP
+
+/* Define to 1 if you have the `updwtmpx' function. */
+#undef HAVE_UPDWTMPX
+
+/* Define to 1 if you have the <usersec.h> header file. */
+#undef HAVE_USERSEC_H
+
+/* Define to 1 if you have the `user_from_uid' function. */
+#undef HAVE_USER_FROM_UID
+
+/* Define to 1 if you have the `usleep' function. */
+#undef HAVE_USLEEP
+
+/* Define to 1 if you have the <util.h> header file. */
+#undef HAVE_UTIL_H
+
+/* Define to 1 if you have the `utimensat' function. */
+#undef HAVE_UTIMENSAT
+
+/* Define to 1 if you have the `utimes' function. */
+#undef HAVE_UTIMES
+
+/* Define to 1 if you have the <utime.h> header file. */
+#undef HAVE_UTIME_H
+
+/* Define to 1 if you have the `utmpname' function. */
+#undef HAVE_UTMPNAME
+
+/* Define to 1 if you have the `utmpxname' function. */
+#undef HAVE_UTMPXNAME
+
+/* Define to 1 if you have the <utmpx.h> header file. */
+#undef HAVE_UTMPX_H
+
+/* Define to 1 if you have the <utmp.h> header file. */
+#undef HAVE_UTMP_H
+
+/* define if you have u_char data type */
+#undef HAVE_U_CHAR
+
+/* define if you have u_int data type */
+#undef HAVE_U_INT
+
+/* define if you have u_int64_t data type */
+#undef HAVE_U_INT64_T
+
+/* define if you have u_intxx_t data type */
+#undef HAVE_U_INTXX_T
+
+/* Define to 1 if you have the `vasprintf' function. */
+#undef HAVE_VASPRINTF
+
+/* Define if va_copy exists */
+#undef HAVE_VA_COPY
+
+/* Define to 1 if you have the <vis.h> header file. */
+#undef HAVE_VIS_H
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#undef HAVE_VSNPRINTF
+
+/* Define to 1 if you have the `waitpid' function. */
+#undef HAVE_WAITPID
+
+/* Define to 1 if you have the `warn' function. */
+#undef HAVE_WARN
+
+/* Define to 1 if you have the <wchar.h> header file. */
+#undef HAVE_WCHAR_H
+
+/* Define to 1 if you have the `wcwidth' function. */
+#undef HAVE_WCWIDTH
+
+/* Define to 1 if you have the `_getlong' function. */
+#undef HAVE__GETLONG
+
+/* Define to 1 if you have the `_getpty' function. */
+#undef HAVE__GETPTY
+
+/* Define to 1 if you have the `_getshort' function. */
+#undef HAVE__GETSHORT
+
+/* Define if you have struct __res_state _res as an extern */
+#undef HAVE__RES_EXTERN
+
+/* Define to 1 if you have the `__b64_ntop' function. */
+#undef HAVE___B64_NTOP
+
+/* Define to 1 if you have the `__b64_pton' function. */
+#undef HAVE___B64_PTON
+
+/* Define if compiler implements __FUNCTION__ */
+#undef HAVE___FUNCTION__
+
+/* Define if libc defines __progname */
+#undef HAVE___PROGNAME
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE___SS_FAMILY_IN_SS
+
+/* Define if __va_copy exists */
+#undef HAVE___VA_COPY
+
+/* Define if compiler implements __func__ */
+#undef HAVE___func__
+
+/* Define this if you are using the Heimdal version of Kerberos V5 */
+#undef HEIMDAL
+
+/* Define if you need to use IP address instead of hostname in $DISPLAY */
+#undef IPADDR_IN_DISPLAY
+
+/* Detect IPv4 in IPv6 mapped addresses and treat as IPv4 */
+#undef IPV4_IN_IPV6
+
+/* Define if your system choked on IP TOS setting */
+#undef IP_TOS_IS_BROKEN
+
+/* Define if you want Kerberos 5 support */
+#undef KRB5
+
+/* Define if pututxline updates lastlog too */
+#undef LASTLOG_WRITE_PUTUTXLINE
+
+/* Define to whatever link() returns for "not supported" if it doesn't return
+   EOPNOTSUPP. */
+#undef LINK_OPNOTSUPP_ERRNO
+
+/* Lock all memory to protect sshd against Linux kcompactd */
+#undef LINUX_MEMLOCK_ONFAULT
+
+/* Adjust Linux out-of-memory killer */
+#undef LINUX_OOM_ADJUST
+
+/* max value of long long calculated by configure */
+#undef LLONG_MAX
+
+/* min value of long long calculated by configure */
+#undef LLONG_MIN
+
+/* Account locked with pw(1) */
+#undef LOCKED_PASSWD_PREFIX
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_STRING
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_SUBSTR
+
+/* Some systems need a utmpx entry for /bin/login to work */
+#undef LOGIN_NEEDS_UTMPX
+
+/* Set this to your mail directory if you do not have _PATH_MAILDIR */
+#undef MAIL_DIRECTORY
+
+/* Define if your compiler lacks __builtin_popcount */
+#undef MISSING_BUILTIN_POPCOUNT
+
+/* Need setpgrp to for controlling tty */
+#undef NEED_SETPGRP
+
+/* compiler does not accept __attribute__ on prototype args */
+#undef NO_ATTRIBUTE_ON_PROTOTYPE_ARGS
+
+/* compiler does not accept __attribute__ on return types */
+#undef NO_ATTRIBUTE_ON_RETURN_TYPE
+
+/* SA_RESTARTed signals do no interrupt select */
+#undef NO_SA_RESTART
+
+/* Define to disable UID restoration test */
+#undef NO_UID_RESTORATION_TEST
+
+/* Define if X11 doesn't support AF_UNIX sockets on that system */
+#undef NO_X11_UNIX_SOCKETS
+
+/* Define if EVP_DigestUpdate returns void */
+#undef OPENSSL_EVP_DIGESTUPDATE_VOID
+
+/* OpenSSL has ECC */
+#undef OPENSSL_HAS_ECC
+
+/* libcrypto has ed25519 support */
+#undef OPENSSL_HAS_ED25519
+
+/* libcrypto has NID_X9_62_prime256v1 */
+#undef OPENSSL_HAS_NISTP256
+
+/* libcrypto has NID_secp384r1 */
+#undef OPENSSL_HAS_NISTP384
+
+/* libcrypto has NID_secp521r1 */
+#undef OPENSSL_HAS_NISTP521
+
+/* libcrypto is missing AES 192 and 256 bit functions */
+#undef OPENSSL_LOBOTOMISED_AES
+
+/* Define if you want the OpenSSL internally seeded PRNG only */
+#undef OPENSSL_PRNG_ONLY
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define if you are using Solaris-derived PAM which passes pam_messages to
+   the conversation function with an extra level of indirection */
+#undef PAM_SUN_CODEBASE
+
+/* Work around problematic Linux PAM modules handling of PAM_TTY */
+#undef PAM_TTY_KLUDGE
+
+/* must supply username to passwd */
+#undef PASSWD_NEEDS_USERNAME
+
+/* System dirs owned by bin (uid 2) */
+#undef PLATFORM_SYS_DIR_UID
+
+/* need inet in pledge for setsockopt IP_TOS */
+#undef PLEDGE_EXTRA_INET
+
+/* Define if poll 2nd arg is ulong */
+#undef POLL_NFDS_T_ULONG
+
+/* Port number of PRNGD/EGD random number socket */
+#undef PRNGD_PORT
+
+/* Location of PRNGD/EGD random number socket */
+#undef PRNGD_SOCKET
+
+/* read(1) can return 0 for a non-closed fd */
+#undef PTY_ZEROREAD
+
+/* Sandbox using capsicum */
+#undef SANDBOX_CAPSICUM
+
+/* Sandbox using Darwin sandbox_init(3) */
+#undef SANDBOX_DARWIN
+
+/* no privsep sandboxing */
+#undef SANDBOX_NULL
+
+/* Sandbox using setrlimit(2) */
+#undef SANDBOX_RLIMIT
+
+/* Sandbox using seccomp filter */
+#undef SANDBOX_SECCOMP_FILTER
+
+/* setrlimit RLIMIT_FSIZE works */
+#undef SANDBOX_SKIP_RLIMIT_FSIZE
+
+/* define if setrlimit RLIMIT_NOFILE breaks things */
+#undef SANDBOX_SKIP_RLIMIT_NOFILE
+
+/* Sandbox using Solaris/Illumos privileges */
+#undef SANDBOX_SOLARIS
+
+/* Specify the system call convention in use */
+#undef SECCOMP_AUDIT_ARCH
+
+/* Define if your platform breaks doing a seteuid before a setuid */
+#undef SETEUID_BREAKS_SETUID
+
+/* The size of `int', as computed by sizeof. */
+#undef SIZEOF_INT
+
+/* The size of `long int', as computed by sizeof. */
+#undef SIZEOF_LONG_INT
+
+/* The size of `long long int', as computed by sizeof. */
+#undef SIZEOF_LONG_LONG_INT
+
+/* The size of `short int', as computed by sizeof. */
+#undef SIZEOF_SHORT_INT
+
+/* The size of `time_t', as computed by sizeof. */
+#undef SIZEOF_TIME_T
+
+/* Define as const if snprintf() can declare const char *fmt */
+#undef SNPRINTF_CONST
+
+/* sockaddr_in has sin_len */
+#undef SOCK_HAS_LEN
+
+/* Define to a Set Process Title type if your system is supported by
+   bsd-setproctitle.c */
+#undef SPT_TYPE
+
+/* Define if sshd somehow reacquires a controlling TTY after setsid() */
+#undef SSHD_ACQUIRES_CTTY
+
+/* sshd PAM service name */
+#undef SSHD_PAM_SERVICE
+
+/* Use audit debugging module */
+#undef SSH_AUDIT_EVENTS
+
+/* Windows is sensitive to read buffer size */
+#undef SSH_IOBUFSZ
+
+/* non-privileged user for privilege separation */
+#undef SSH_PRIVSEP_USER
+
+/* Use tunnel device compatibility to OpenBSD */
+#undef SSH_TUN_COMPAT_AF
+
+/* Open tunnel devices the FreeBSD way */
+#undef SSH_TUN_FREEBSD
+
+/* Open tunnel devices the Linux tun/tap way */
+#undef SSH_TUN_LINUX
+
+/* No layer 2 tunnel support */
+#undef SSH_TUN_NO_L2
+
+/* Open tunnel devices the OpenBSD way */
+#undef SSH_TUN_OPENBSD
+
+/* Prepend the address family to IP tunnel traffic */
+#undef SSH_TUN_PREPEND_AF
+
+/* Define to 1 if all of the C90 standard headers exist (not just the ones
+   required in a freestanding environment). This macro is provided for
+   backward compatibility; new code need not use it. */
+#undef STDC_HEADERS
+
+/* Define if you want a different $PATH for the superuser */
+#undef SUPERUSER_PATH
+
+/* syslog_r function is safe to use in in a signal handler */
+#undef SYSLOG_R_SAFE_IN_SIGHAND
+
+/* Have sshd notify systemd on start/reload */
+#undef SYSTEMD_NOTIFY
+
+/* Support routing domains using Linux VRF */
+#undef SYS_RDOMAIN_LINUX
+
+/* Support passwords > 8 chars */
+#undef UNIXWARE_LONG_PASSWORDS
+
+/* Specify default $PATH */
+#undef USER_PATH
+
+/* Define this if you want to use libkafs' AFS support */
+#undef USE_AFS
+
+/* Use BSM audit module */
+#undef USE_BSM_AUDIT
+
+/* Use btmp to log bad logins */
+#undef USE_BTMP
+
+/* Use libedit for sftp */
+#undef USE_LIBEDIT
+
+/* Use Linux audit module */
+#undef USE_LINUX_AUDIT
+
+/* Enable OpenSSL engine support */
+#undef USE_OPENSSL_ENGINE
+
+/* Define if you want to enable PAM support */
+#undef USE_PAM
+
+/* Use PIPES instead of a socketpair() */
+#undef USE_PIPES
+
+/* Define if you have Solaris privileges */
+#undef USE_SOLARIS_PRIVS
+
+/* Define if you have Solaris process contracts */
+#undef USE_SOLARIS_PROCESS_CONTRACTS
+
+/* Define if you have Solaris projects */
+#undef USE_SOLARIS_PROJECTS
+
+/* Use libwtmpdb for sshd */
+#undef USE_WTMPDB
+
+/* compiler variable declarations after code */
+#undef VARIABLE_DECLARATION_AFTER_CODE
+
+/* compiler supports variable length arrays */
+#undef VARIABLE_LENGTH_ARRAYS
+
+/* Define if you shouldn't strip 'tty' from your ttyname in [uw]tmp */
+#undef WITH_ABBREV_NO_TTY
+
+/* Define if you want to enable AIX4's authenticate function */
+#undef WITH_AIXAUTHENTICATE
+
+/* Define if you have/want arrays (cluster-wide session management, not C
+   arrays) */
+#undef WITH_IRIX_ARRAY
+
+/* Define if you want IRIX audit trails */
+#undef WITH_IRIX_AUDIT
+
+/* Define if you want IRIX kernel jobs */
+#undef WITH_IRIX_JOBS
+
+/* Define if you want IRIX project management */
+#undef WITH_IRIX_PROJECT
+
+/* use libcrypto for cryptography */
+#undef WITH_OPENSSL
+
+/* Define if you want SELinux support. */
+#undef WITH_SELINUX
+
+/* Enable zlib */
+#undef WITH_ZLIB
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+#  define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+#  undef WORDS_BIGENDIAN
+# endif
+#endif
+
+/* Define if xauth is found in your path */
+#undef XAUTH_PATH
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* log for bad login attempts */
+#undef _PATH_BTMP
+
+/* Full path of your "passwd" program */
+#undef _PATH_PASSWD_PROG
+
+/* Specify location of ssh.pid */
+#undef _PATH_SSH_PIDDIR
+
+/* Define if we don't have struct __res_state in resolv.h */
+#undef __res_state
+
+/* Define to rpl_calloc if the replacement function should be used. */
+#undef calloc
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
+
+/* Define to rpl_realloc if the replacement function should be used. */
+#undef realloc
+
+/* type to use in place of socklen_t if not defined */
+#undef socklen_t
--- a/configure~	1970-01-01 04:00:00.000000000 +0400
+++ b/configure~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,28438 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.71 for OpenSSH Portable.
+#
+# Report bugs to <openssh-unix-dev@mindrot.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
+# Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
+if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else $as_nop
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+
+# Reset variables that may have inherited troublesome values from
+# the environment.
+
+# IFS needs to be set, to space, tab, and newline, in precisely that order.
+# (If _AS_PATH_WALK were called with IFS unset, it would have the
+# side effect of setting IFS to empty, thus disabling word splitting.)
+# Quoting is to prevent editors from complaining about space-tab.
+as_nl='
+'
+export as_nl
+IFS=" ""	$as_nl"
+
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# Ensure predictable behavior from utilities with locale-dependent output.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# We cannot yet rely on "unset" to work, but we need these variables
+# to be unset--not just set to an empty or harmless value--now, to
+# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh).  This construct
+# also avoids known problems related to "unset" and subshell syntax
+# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
+for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
+do eval test \${$as_var+y} \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+
+# Ensure that fds 0, 1, and 2 are open.
+if (exec 3>&0) 2>/dev/null; then :; else exec 0</dev/null; fi
+if (exec 3>&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
+if (exec 3>&2)            ; then :; else exec 2>/dev/null; fi
+
+# The user is always right.
+if ${PATH_SEPARATOR+false} :; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    test -r "$as_dir$0" && as_myself=$as_dir$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="as_nop=:
+if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else \$as_nop
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" )
+then :
+
+else \$as_nop
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+blah=\$(echo \$(echo blah))
+test x\"\$blah\" = xblah || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null
+then :
+  as_have_required=yes
+else $as_nop
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null
+then :
+
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null
+then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+IFS=$as_save_IFS
+if $as_found
+then :
+
+else $as_nop
+  if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi
+fi
+
+
+      if test "x$CONFIG_SHELL" != x
+then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno
+then :
+  printf "%s\n" "$0: This script requires a shell more modern than all"
+  printf "%s\n" "$0: the shells that I found on your system."
+  if test ${ZSH_VERSION+y} ; then
+    printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and
+$0: openssh-unix-dev@mindrot.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
+then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else $as_nop
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
+then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else $as_nop
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  printf "%s\n" "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+# Determine whether it's possible to make 'echo' print without a newline.
+# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
+# for compatibility with existing Makefiles.
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+# For backward compatibility with old third-party macros, we provide
+# the shell variables $as_echo and $as_echo_n.  New code should use
+# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
+as_echo='printf %s\n'
+as_echo_n='printf %s'
+
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='OpenSSH'
+PACKAGE_TARNAME='openssh'
+PACKAGE_VERSION='Portable'
+PACKAGE_STRING='OpenSSH Portable'
+PACKAGE_BUGREPORT='openssh-unix-dev@mindrot.org'
+PACKAGE_URL=''
+
+ac_unique_file="ssh.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stddef.h>
+#ifdef HAVE_STDIO_H
+# include <stdio.h>
+#endif
+#ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+#ifdef HAVE_STRING_H
+# include <string.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_header_c_list=
+ac_subst_vars='LTLIBOBJS
+COMPATINCLUDES
+CFLAGS_NOPIE
+LDFLAGS_NOPIE
+TMUX
+DROPBEARCONVERT
+DROPBEARKEY
+DBCLIENT
+DROPBEAR
+CONCH
+PUTTYGEN
+PLINK
+DEPEND
+UNSUPPORTED_ALGORITHMS
+TEST_MALLOC_OPTIONS
+TEST_SSH_UTF8
+TEST_SSH_IPV6
+piddir
+user_path
+mansubdir
+MANTYPE
+XAUTH_PATH
+STRIP_OPT
+xauth_path
+PRIVSEP_PATH
+CHANNELLIBS
+K5LIBS
+GSSLIBS
+KRB5CONF
+SSHDLIBS
+SSH_PRIVSEP_USER
+SK_STANDALONE
+LIBFIDO2
+SK_DUMMY_LIBRARY
+OPENSSL_BIN
+openssl_bin
+PICFLAG
+LIBWTMPDB
+LIBEDIT
+LDNSCONFIG
+LIBOBJS
+TESTLIBS
+LD
+PATH_PASSWD_PROG
+STARTUP_SCRIPT_SHELL
+MAKE_PACKAGE_SUPPORTED
+PATH_USERADD_PROG
+PATH_GROUPADD_PROG
+MANFMT
+TEST_SHELL
+PKGCONFIG
+MANDOC
+NROFF
+GROFF
+SH
+TEST_MINUS_S_SH
+SED
+KILL
+CAT
+ac_ct_AR
+AR
+MKDIR_P
+EGREP
+GREP
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+RANLIB
+CPP
+AWK
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+runstatedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_largefile
+with_openssl
+with_stackprotect
+with_hardening
+with_retpoline
+with_rpath
+with_cflags
+with_cflags_after
+with_cppflags
+with_ldflags
+with_ldflags_after
+with_libs
+with_Werror
+with_linux_memlock_onfault
+with_solaris_contracts
+with_solaris_projects
+with_solaris_privs
+with_osfsia
+with_zlib
+with_zlib_version_check
+with_ldns
+with_libedit
+with_wtmpdb
+with_audit
+with_pie
+enable_pkcs11
+enable_security_key
+with_security_key_builtin
+with_security_key_standalone
+with_ssl_dir
+with_openssl_header_check
+with_ssl_engine
+with_prngd_port
+with_prngd_socket
+with_pam
+with_pam_service
+with_privsep_user
+with_sandbox
+with_selinux
+with_kerberos5
+with_privsep_path
+with_xauth
+enable_strip
+with_maildir
+with_mantype
+with_shadow
+with_ipaddr_display
+enable_etc_default_login
+with_default_path
+with_superuser_path
+with_4in6
+with_bsd_auth
+with_pid_dir
+enable_fd_passing
+enable_lastlog
+enable_utmp
+enable_utmpx
+enable_wtmp
+enable_wtmpx
+enable_libutil
+enable_pututline
+enable_pututxline
+with_lastlog
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir runstatedir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures OpenSSH Portable to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/openssh]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of OpenSSH Portable:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-largefile     omit support for large files
+  --disable-pkcs11        disable PKCS#11 support code [no]
+  --disable-security-key  disable U2F/FIDO support code no
+  --disable-strip         Disable calling strip(1) on install
+  --disable-etc-default-login Disable using PATH from /etc/default/login no
+  --disable-fd-passing    disable file descriptor passsing no
+  --disable-lastlog       disable use of lastlog even if detected no
+  --disable-utmp          disable use of utmp even if detected no
+  --disable-utmpx         disable use of utmpx even if detected no
+  --disable-wtmp          disable use of wtmp even if detected no
+  --disable-wtmpx         disable use of wtmpx even if detected no
+  --disable-libutil       disable use of libutil (login() etc.) no
+  --disable-pututline     disable use of pututline() etc. (uwtmp) no
+  --disable-pututxline    disable use of pututxline() etc. (uwtmpx) no
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --without-openssl       Disable use of OpenSSL; use only limited internal crypto **EXPERIMENTAL**
+  --without-stackprotect  Don't use compiler's stack protection
+  --without-hardening     Don't use toolchain hardening flags
+  --without-retpoline     Enable retpoline spectre mitigation
+  --without-rpath         Disable auto-added -R linker paths
+  --with-cflags           Specify additional flags to pass to compiler
+  --with-cflags-after     Specify additional flags to pass to compiler after configure
+  --with-cppflags         Specify additional flags to pass to preprocessor
+  --with-ldflags          Specify additional flags to pass to linker
+  --with-ldflags-after    Specify additional flags to pass to linker after configure
+  --with-libs             Specify additional libraries to link with
+  --with-Werror           Build main code with -Werror
+  --with-linux-memlock-onfault Enables memory locking on Linux
+  --with-solaris-contracts Enable Solaris process contracts (experimental)
+  --with-solaris-projects Enable Solaris projects (experimental)
+  --with-solaris-privs    Enable Solaris/Illumos privileges (experimental)
+  --with-osfsia           Enable Digital Unix SIA
+  --with-zlib=PATH        Use zlib in PATH
+  --without-zlib-version-check Disable zlib version check
+  --with-ldns[=PATH]      Use ldns for DNSSEC support (optionally in PATH)
+  --with-libedit[=PATH]   Enable libedit support for sftp
+  --with-wtmpdb[=PATH]   Enable wtmpdb support for sshd
+  --with-audit=module     Enable audit support (modules=debug,bsm,linux)
+  --with-pie              Build Position Independent Executables if possible
+  --with-security-key-builtin include builtin U2F/FIDO support
+  --with-security-key-standalone build standalone sk-libfido2 SecurityKeyProvider
+  --with-ssl-dir=PATH     Specify path to OpenSSL installation
+  --without-openssl-header-check Disable OpenSSL version consistency check
+  --with-ssl-engine       Enable OpenSSL (hardware) ENGINE support
+  --with-prngd-port=PORT  read entropy from PRNGD/EGD TCP localhost:PORT
+  --with-prngd-socket=FILE read entropy from PRNGD/EGD socket FILE (default=/var/run/egd-pool)
+  --with-pam              Enable PAM support
+  --with-pam-service=name Specify PAM service name
+  --with-privsep-user=user Specify non-privileged user for privilege separation
+  --with-sandbox=style    Specify privilege separation sandbox (no, capsicum, darwin, rlimit, seccomp_filter)
+  --with-selinux          Enable SELinux support
+  --with-kerberos5=PATH   Enable Kerberos 5 support
+  --with-privsep-path=xxx Path for privilege separation chroot (default=/var/empty)
+  --with-xauth=PATH       Specify path to xauth program
+  --with-maildir=/path/to/mail    Specify your system mail directory
+  --with-mantype=man|cat|doc  Set man page type
+  --without-shadow        Disable shadow password support
+  --with-ipaddr-display   Use ip address instead of hostname in $DISPLAY
+  --with-default-path=    Specify default $PATH environment for server
+  --with-superuser-path=  Specify different path for super-user
+  --with-4in6             Check for and convert IPv4 in IPv6 mapped addresses
+  --with-bsd-auth         Enable BSD auth support
+  --with-pid-dir=PATH     Specify location of sshd.pid file
+  --with-lastlog=FILE|DIR specify lastlog location common locations
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <openssh-unix-dev@mindrot.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for configure.gnu first; this name is used for a wrapper for
+    # Metaconfig's "Configure" on case-insensitive file systems.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+OpenSSH configure Portable
+generated by GNU Autoconf 2.71
+
+Copyright (C) 2021 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest.beam
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to run conftest.$ac_ext, and return whether this succeeded. Assumes that
+# executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: program exited with status $ac_status" >&5
+       printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as

[truncated 726918 bytes]

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1 (local metadata check)

Local metadata consistency check

## Refinement Pass 1

You are refining a fixer patch after an explicit code review.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Read the latest author response at `./patch-output.txt`. Read the review report at `./review-1-output.txt`. This is refinement round 1. The original pre-edit snapshot is available at `./source` if you need to compare the current patch against it. Re-read the planning pass at `./plan-output.txt` before editing. The workspace currently changes these repo-relative paths: regress/authorized_keys_root, regress/ecdsa-sha2-nistp256, regress/ecdsa-sha2-nistp256.pub, regress/ecdsa-sha2-nistp384, regress/ecdsa-sha2-nistp384.pub, regress/ecdsa-sha2-nistp521, regress/ecdsa-sha2-nistp521.pub, regress/host.sk-ecdsa-sha2-nistp256@openssh.com, regress/host.sk-ssh-ed25519@openssh.com, regress/log/20260512T082706.051409.ssh.346.log, regress/sk-ecdsa-sha2-nistp256@openssh.com, regress/sk-ecdsa-sha2-nistp256@openssh.com.pub, regress/sk-ssh-ed25519@openssh.com, regress/sk-ssh-ed25519@openssh.com.pub, regress/ssh-ed25519, regress/ssh-ed25519.pub, regress/ssh-rsa, regress/ssh-rsa.pub, regress/sshd-log-wrapper.sh. Either keep that exact set synchronized with `## Git Add Paths` and `## Issue Connection`, or revert any unintended file before you answer.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. Address the review findings with the smallest reasonable follow-up changes. If the review identifies a runtime or correctness bug in the changed code, you must update the code itself before answering; a metadata-only response is not sufficient. Keep the patch upstream-friendly, use local project helpers and compat APIs when available, avoid awkward control flow when a simpler structure will do, keep the final response gittable, make the maintainer-facing explanation plain and direct, keep `## Evidence Confidence` honest, add short comments for any non-obvious translation or remapping logic, run relevant project-level build/tests from the workspace root before narrower checks when possible, try a bounded independent reproduction command/test if the review or plan shows one is safe, and summarize which review findings you addressed.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

[truncated 3919 bytes]

Response

## Plan Pass

## Problem

Fixer observed `sshd-session: gis [priv]` in a runaway-process investigation, but the bundle shows an indirect signal: sleeping in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, one strace line over 5s, and only `0.3%` total CPU across sampled `sshd-session` processes. This looks consistent with a normal privileged monitor waiting for child/session events, not a confirmed OpenSSH userspace busy loop.

## Evidence Confidence

inferred

## Proposed Subject

No patch: require stronger sshd-session loop evidence

## Patch Plan

Do not edit source files in this pass or propose an upstream source patch from the current evidence. Replace the prior Fixer patch rather than improve it as code: `prior-best.patch` adds an unrelated `buildpkg.sh`, which does not address `sshd-session` monitor behavior and should be rejected.

Docs/conventions checked: `README.md`, `README.privsep`, and `regress/README.regress`. Relevant local code/conventions checked include `sshd-session.c` privilege separation setup, `monitor.c:monitor_read()`, `sshd.c` accept-loop `ppoll()`, `packet.c` write-wait polling, and `misc.c` `ptimeout_*` helpers. Local APIs/conventions to follow if stronger evidence later justifies a patch: `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`/`xcalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers.

If later symbolized traces or a local test prove an actual spin, scope the patch to the confirmed loop in `monitor.c`, `sshd-session.c`, `serverloop.c`, or the relevant compat wrapper. Prefer simple bounded `continue`/`return` flow matching nearby code; avoid introducing unnecessary `goto`.

## Risks

A speculative timeout or wakeup change could break valid idle SSH sessions or privilege-separation monitor behavior.

A source patch based only on this evidence would be upstream-hostile because the collected signal is consistent with intended blocking wait behavior.

## Validation

First try the project-level entrypoint from the workspace root:

```sh
./configure && make
```

If it fails because generated files or dependencies are missing, record the exact command and failure reason, then run the narrowest relevant reproducible check, such as:

```sh
make sshd-session
```

Bounded independent reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

If that creates a usable session, sample the spawned `sshd-session` with `strace -ttT -p <pid>` or a symbolized backtrace. Do not claim `reproduced` unless the command shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` data points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop. A speculative timeout or wakeup change would risk changing valid idle-session behavior without addressing a demonstrated bug.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. The evidence shows `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, a single `restart_syscall` line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot samples are kernel memory-management symbols, not symbolized OpenSSH frames.

I made no source change. The prior Fixer patch adding `buildpkg.sh` was not applied because it is unrelated to the `sshd-session` evidence and is not an upstreamable fix for this report.

Docs and conventions checked: `README.md`, `README.privsep`, `regress/README.regress`, `monitor.c:monitor_read()`, `sshd-session.c` privilege separation setup, `sshd.c` polling, `packet.c` write waiting, and `misc.c` `ptimeout_*`. Relevant local helpers/conventions include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`/`xcalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers. No helper was needed because no code is changing.

The expected effect is to avoid shipping a speculative patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback build succeeded:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

This built prerequisites but failed before exercising a privsep session: `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check:

```sh
./sshd-session
```

It exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. No command reproduced sustained CPU use or a userspace loop. Tracked source diff is clean after validation cleanup.

## Review Pass 1 (local metadata check)

RESULT: fix-needed

## Findings
1. Patch metadata drift: the workspace currently changes `regress/authorized_keys_root`, `regress/ecdsa-sha2-nistp256`, `regress/ecdsa-sha2-nistp256.pub`, `regress/ecdsa-sha2-nistp384`, `regress/ecdsa-sha2-nistp384.pub`, `regress/ecdsa-sha2-nistp521`, `regress/ecdsa-sha2-nistp521.pub`, `regress/host.sk-ecdsa-sha2-nistp256@openssh.com`, `regress/host.sk-ssh-ed25519@openssh.com`, `regress/log/20260512T082706.051409.ssh.346.log`, `regress/sk-ecdsa-sha2-nistp256@openssh.com`, `regress/sk-ecdsa-sha2-nistp256@openssh.com.pub`, `regress/sk-ssh-ed25519@openssh.com`, `regress/sk-ssh-ed25519@openssh.com.pub`, `regress/ssh-ed25519`, `regress/ssh-ed25519.pub`, `regress/ssh-rsa`, `regress/ssh-rsa.pub`, `regress/sshd-log-wrapper.sh`, but `## Git Add Paths` lists `None`. Update `## Git Add Paths` to match the real shipped file set exactly, and make sure `## Issue Connection` explains every functional file that remains in the patch.
2. Missing from `## Git Add Paths`: `regress/authorized_keys_root`, `regress/ecdsa-sha2-nistp256`, `regress/ecdsa-sha2-nistp256.pub`, `regress/ecdsa-sha2-nistp384`, `regress/ecdsa-sha2-nistp384.pub`, `regress/ecdsa-sha2-nistp521`, `regress/ecdsa-sha2-nistp521.pub`, `regress/host.sk-ecdsa-sha2-nistp256@openssh.com`, `regress/host.sk-ssh-ed25519@openssh.com`, `regress/log/20260512T082706.051409.ssh.346.log`, `regress/sk-ecdsa-sha2-nistp256@openssh.com`, `regress/sk-ecdsa-sha2-nistp256@openssh.com.pub`, `regress/sk-ssh-ed25519@openssh.com`, `regress/sk-ssh-ed25519@openssh.com.pub`, `regress/ssh-ed25519`, `regress/ssh-ed25519.pub`, `regress/ssh-rsa`, `regress/ssh-rsa.pub`, `regress/sshd-log-wrapper.sh`.
2. Listed in `## Git Add Paths` but not actually changed: `None`.

## Refinement Pass 1

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` data points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop.

## Evidence Confidence
inferred

## Issue Connection
The collected signal is indirect: `sshd-session: gis [priv]` was captured with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, one `restart_syscall` line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot samples are kernel memory-management symbols, not symbolized OpenSSH frames.

I made no source change. I addressed the review finding by deleting the generated regression artifacts left from validation, so the workspace now matches `Git Add Paths: None`. The prior Fixer `buildpkg.sh` patch remains rejected as unrelated.

Docs and conventions checked: `README.md`, `README.privsep`, `regress/README.regress`, `monitor.c:monitor_read()`, `sshd-session.c`, `sshd.c`, `packet.c`, and `misc.c` `ptimeout_*`. Relevant helpers include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`/`xcalloc`, `atomicio`, `ptimeout_*`, and poll/ppoll compat wrappers. No helper was needed because no code is changing.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
Review finding addressed: removed unintended generated regression artifacts. `git status --short` and `git diff --stat` are now clean.

Prior validation remains applicable: `./configure && make` failed with `configure: error: ./configure.ac newer than configure, run autoreconf`; `autoreconf && ./configure && make sshd-session` succeeded; `make tests LTESTS=connect-privsep` failed before exercising privsep due to `Unsupported option UsePAM`, missing `/var/empty`, and `FATAL: sshd_proxy broken`. No command reproduced sustained CPU use or a userspace loop.

## Review Pass 2

RESULT: ok

The workspace is clean (`git status --short` has no output), so `## Git Add Paths: None` matches the actual patch state.

The refined response keeps evidence confidence at `inferred`, does not claim a reproduced OpenSSH bug, rejects the unrelated prior `buildpkg.sh` patch, and explains why the collected `poll`/sleeping-state evidence is insufficient for an upstream source change. Validation is adequately reported for a no-patch diagnosis, including the project-level `./configure && make` blocker and the bounded `connect-privsep` reproduction attempt.

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1 (local metadata check)

Local metadata consistency check

## Refinement Pass 1

You are refining a fixer patch after an explicit code review.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Read the latest author response at `./patch-output.txt`. Read the review report at `./review-1-output.txt`. This is refinement round 1. The original pre-edit snapshot is available at `./source` if you need to compare the current patch against it. Re-read the planning pass at `./plan-output.txt` before editing. The workspace currently changes these repo-relative paths: regress/authorized_keys_root, regress/ecdsa-sha2-nistp256, regress/ecdsa-sha2-nistp256.pub, regress/ecdsa-sha2-nistp384, regress/ecdsa-sha2-nistp384.pub, regress/ecdsa-sha2-nistp521, regress/ecdsa-sha2-nistp521.pub, regress/host.sk-ecdsa-sha2-nistp256@openssh.com, regress/host.sk-ssh-ed25519@openssh.com, regress/log/20260512T082706.051409.ssh.346.log, regress/sk-ecdsa-sha2-nistp256@openssh.com, regress/sk-ecdsa-sha2-nistp256@openssh.com.pub, regress/sk-ssh-ed25519@openssh.com, regress/sk-ssh-ed25519@openssh.com.pub, regress/ssh-ed25519, regress/ssh-ed25519.pub, regress/ssh-rsa, regress/ssh-rsa.pub, regress/sshd-log-wrapper.sh. Either keep that exact set synchronized with `## Git Add Paths` and `## Issue Connection`, or revert any unintended file before you answer.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. Address the review findings with the smallest reasonable follow-up changes. If the review identifies a runtime or correctness bug in the changed code, you must update the code itself before answering; a metadata-only response is not sufficient. Keep the patch upstream-friendly, use local project helpers and compat APIs when available, avoid awkward control flow when a simpler structure will do, keep the final response gittable, make the maintainer-facing explanation plain and direct, keep `## Evidence Confidence` honest, add short comments for any non-obvious translation or remapping logic, run relevant project-level build/tests from the workspace root before narrower checks when possible, try a bounded independent reproduction command/test if the review or plan shows one is safe, and summarize which review findings you addressed.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

[truncated 3919 bytes]

Response

## Plan Pass

## Problem

Fixer observed `sshd-session: gis [priv]` in a runaway-process investigation, but the bundle shows an indirect signal: sleeping in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, one strace line over 5s, and only `0.3%` total CPU across sampled `sshd-session` processes. This looks consistent with a normal privileged monitor waiting for child/session events, not a confirmed OpenSSH userspace busy loop.

## Evidence Confidence

inferred

## Proposed Subject

No patch: require stronger sshd-session loop evidence

## Patch Plan

Do not edit source files in this pass or propose an upstream source patch from the current evidence. Replace the prior Fixer patch rather than improve it as code: `prior-best.patch` adds an unrelated `buildpkg.sh`, which does not address `sshd-session` monitor behavior and should be rejected.

Docs/conventions checked: `README.md`, `README.privsep`, and `regress/README.regress`. Relevant local code/conventions checked include `sshd-session.c` privilege separation setup, `monitor.c:monitor_read()`, `sshd.c` accept-loop `ppoll()`, `packet.c` write-wait polling, and `misc.c` `ptimeout_*` helpers. Local APIs/conventions to follow if stronger evidence later justifies a patch: `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`/`xcalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers.

If later symbolized traces or a local test prove an actual spin, scope the patch to the confirmed loop in `monitor.c`, `sshd-session.c`, `serverloop.c`, or the relevant compat wrapper. Prefer simple bounded `continue`/`return` flow matching nearby code; avoid introducing unnecessary `goto`.

## Risks

A speculative timeout or wakeup change could break valid idle SSH sessions or privilege-separation monitor behavior.

A source patch based only on this evidence would be upstream-hostile because the collected signal is consistent with intended blocking wait behavior.

## Validation

First try the project-level entrypoint from the workspace root:

```sh
./configure && make
```

If it fails because generated files or dependencies are missing, record the exact command and failure reason, then run the narrowest relevant reproducible check, such as:

```sh
make sshd-session
```

Bounded independent reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

If that creates a usable session, sample the spawned `sshd-session` with `strace -ttT -p <pid>` or a symbolized backtrace. Do not claim `reproduced` unless the command shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` data points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop. A speculative timeout or wakeup change would risk changing valid idle-session behavior without addressing a demonstrated bug.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. The evidence shows `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, a single `restart_syscall` line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot samples are kernel memory-management symbols, not symbolized OpenSSH frames.

I made no source change. The prior Fixer patch adding `buildpkg.sh` was not applied because it is unrelated to the `sshd-session` evidence and is not an upstreamable fix for this report.

Docs and conventions checked: `README.md`, `README.privsep`, `regress/README.regress`, `monitor.c:monitor_read()`, `sshd-session.c` privilege separation setup, `sshd.c` polling, `packet.c` write waiting, and `misc.c` `ptimeout_*`. Relevant local helpers/conventions include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`/`xcalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers. No helper was needed because no code is changing.

The expected effect is to avoid shipping a speculative patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback build succeeded:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

This built prerequisites but failed before exercising a privsep session: `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check:

```sh
./sshd-session
```

It exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. No command reproduced sustained CPU use or a userspace loop. Tracked source diff is clean after validation cleanup.

## Review Pass 1 (local metadata check)

RESULT: fix-needed

## Findings
1. Patch metadata drift: the workspace currently changes `regress/authorized_keys_root`, `regress/ecdsa-sha2-nistp256`, `regress/ecdsa-sha2-nistp256.pub`, `regress/ecdsa-sha2-nistp384`, `regress/ecdsa-sha2-nistp384.pub`, `regress/ecdsa-sha2-nistp521`, `regress/ecdsa-sha2-nistp521.pub`, `regress/host.sk-ecdsa-sha2-nistp256@openssh.com`, `regress/host.sk-ssh-ed25519@openssh.com`, `regress/log/20260512T082706.051409.ssh.346.log`, `regress/sk-ecdsa-sha2-nistp256@openssh.com`, `regress/sk-ecdsa-sha2-nistp256@openssh.com.pub`, `regress/sk-ssh-ed25519@openssh.com`, `regress/sk-ssh-ed25519@openssh.com.pub`, `regress/ssh-ed25519`, `regress/ssh-ed25519.pub`, `regress/ssh-rsa`, `regress/ssh-rsa.pub`, `regress/sshd-log-wrapper.sh`, but `## Git Add Paths` lists `None`. Update `## Git Add Paths` to match the real shipped file set exactly, and make sure `## Issue Connection` explains every functional file that remains in the patch.
2. Missing from `## Git Add Paths`: `regress/authorized_keys_root`, `regress/ecdsa-sha2-nistp256`, `regress/ecdsa-sha2-nistp256.pub`, `regress/ecdsa-sha2-nistp384`, `regress/ecdsa-sha2-nistp384.pub`, `regress/ecdsa-sha2-nistp521`, `regress/ecdsa-sha2-nistp521.pub`, `regress/host.sk-ecdsa-sha2-nistp256@openssh.com`, `regress/host.sk-ssh-ed25519@openssh.com`, `regress/log/20260512T082706.051409.ssh.346.log`, `regress/sk-ecdsa-sha2-nistp256@openssh.com`, `regress/sk-ecdsa-sha2-nistp256@openssh.com.pub`, `regress/sk-ssh-ed25519@openssh.com`, `regress/sk-ssh-ed25519@openssh.com.pub`, `regress/ssh-ed25519`, `regress/ssh-ed25519.pub`, `regress/ssh-rsa`, `regress/ssh-rsa.pub`, `regress/sshd-log-wrapper.sh`.
2. Listed in `## Git Add Paths` but not actually changed: `None`.

## Refinement Pass 1

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` data points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop.

## Evidence Confidence
inferred

## Issue Connection
The collected signal is indirect: `sshd-session: gis [priv]` was captured with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, one `restart_syscall` line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot samples are kernel memory-management symbols, not symbolized OpenSSH frames.

I made no source change. I addressed the review finding by deleting the generated regression artifacts left from validation, so the workspace now matches `Git Add Paths: None`. The prior Fixer `buildpkg.sh` patch remains rejected as unrelated.

Docs and conventions checked: `README.md`, `README.privsep`, `regress/README.regress`, `monitor.c:monitor_read()`, `sshd-session.c`, `sshd.c`, `packet.c`, and `misc.c` `ptimeout_*`. Relevant helpers include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`/`xcalloc`, `atomicio`, `ptimeout_*`, and poll/ppoll compat wrappers. No helper was needed because no code is changing.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
Review finding addressed: removed unintended generated regression artifacts. `git status --short` and `git diff --stat` are now clean.

Prior validation remains applicable: `./configure && make` failed with `configure: error: ./configure.ac newer than configure, run autoreconf`; `autoreconf && ./configure && make sshd-session` succeeded; `make tests LTESTS=connect-privsep` failed before exercising privsep due to `Unsupported option UsePAM`, missing `/var/empty`, and `FATAL: sshd_proxy broken`. No command reproduced sustained CPU use or a userspace loop.

## Review Pass 2

RESULT: ok

The workspace is clean (`git status --short` has no output), so `## Git Add Paths: None` matches the actual patch state.

The refined response keeps evidence confidence at `inferred`, does not claim a reproduced OpenSSH bug, rejects the unrelated prior `buildpkg.sh` patch, and explains why the collected `poll`/sleeping-state evidence is insufficient for an upstream source change. Validation is adequately reported for a no-patch diagnosis, including the project-level `./configure && make` blocker and the bounded `connect-privsep` reproduction attempt.

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem
Fixer flagged `sshd-session: gis [priv]` as a possible runaway process, but the bundle shows indirect profiler/process evidence: sleeping in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, one strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. This does not establish an OpenSSH userspace loop.

## Evidence Confidence
inferred

## Proposed Subject
No source patch: require stronger sshd-session loop evidence

## Patch Plan
Do not edit source in this pass. Replace the prior Fixer patch outcome with a no-patch diagnosis; `prior-best.patch` adds `buildpkg.sh`, which is unrelated to the sshd-session evidence and should be rejected.

Docs checked: `README.md`; no `CONTRIBUTING`, `HACKING`, `README-hacking`, `docs/`, or `dev-docs/` were found. Also checked relevant local docs/code: `README.privsep`, `regress/README.regress`, `monitor.c`, `serverloop.c`, `misc.c`.

Relevant conventions/helpers: `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, OpenSSH `poll`/`ppoll` compatibility wrappers, and `ptimeout_*` helpers. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)` and in `serverloop.c` with `ppoll()` via `ptimeout_*`.

If later symbolized or reproducible evidence identifies a real busy loop, scope a patch to the confirmed loop and use existing helpers. Prefer simple bounded `continue`/`return` control flow; avoid introducing unnecessary `goto`.

## Risks
A speculative timeout/wakeup patch could break valid idle SSH sessions or privilege-separation monitor behavior.

A source patch from this bundle alone would be upstream-hostile because the collected signal is consistent with normal blocking wait behavior.

## Validation
First try from workspace root:

```sh
./configure && make
```

If that fails due to generated files or dependencies, report the exact failure, then run the narrowest relevant build, likely:

```sh
make sshd-session
```

Bounded independent reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

If that reaches a live privsep session, sample the spawned `sshd-session` with `strace -ttT -p <pid>` or a symbolized backtrace. Do not claim `reproduced` unless this shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. Fixer captured `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, one `restart_syscall` strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes.

In OpenSSH, privilege separation means a privileged monitor process remains available for root-only work. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)`, while the session loop uses `ppoll()` through `ptimeout_*`.

I made no source change and rejected the prior `buildpkg.sh` patch because it is unrelated to the sshd-session evidence. Checked conventions/helpers: `README.md`, `README.privsep`, `regress/README.regress`, `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback compile succeeded: `autoreconf && ./configure && make sshd-session` completed and linked `sshd-session`.

Bounded reproduction attempt: `make tests LTESTS=connect-privsep` failed before exercising a privsep session with `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check: `./sshd-session` exited with `sshd-session should not be executed directly`. No command reproduced sustained CPU use or a userspace loop. Final `git status --short` is clean.

## Review Pass 1

RESULT: ok

No source changes remain in the workspace, and `## Git Add Paths` correctly lists `None`.

The author response keeps evidence confidence at `inferred`, does not claim a reproduced OpenSSH bug, and avoids presenting indirect profiler/strace data as a confirmed userspace loop. The validation is acceptable for a no-patch diagnosis: it attempted `./configure && make`, reported the configure-generation blocker, ran a focused `sshd-session` build after `autoreconf`, and attempted `make tests LTESTS=connect-privsep` with the exact blocker.

The write-up also rejects the unrelated prior `buildpkg.sh` patch and names relevant local conventions/helpers. Current `git status --short` and `git diff` are clean.

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem
Fixer flagged `sshd-session: gis [priv]` as a possible runaway process, but the bundle shows indirect profiler/process evidence: sleeping in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, one strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. This does not establish an OpenSSH userspace loop.

## Evidence Confidence
inferred

## Proposed Subject
No source patch: require stronger sshd-session loop evidence

## Patch Plan
Do not edit source in this pass. Replace the prior Fixer patch outcome with a no-patch diagnosis; `prior-best.patch` adds `buildpkg.sh`, which is unrelated to the sshd-session evidence and should be rejected.

Docs checked: `README.md`; no `CONTRIBUTING`, `HACKING`, `README-hacking`, `docs/`, or `dev-docs/` were found. Also checked relevant local docs/code: `README.privsep`, `regress/README.regress`, `monitor.c`, `serverloop.c`, `misc.c`.

Relevant conventions/helpers: `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, OpenSSH `poll`/`ppoll` compatibility wrappers, and `ptimeout_*` helpers. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)` and in `serverloop.c` with `ppoll()` via `ptimeout_*`.

If later symbolized or reproducible evidence identifies a real busy loop, scope a patch to the confirmed loop and use existing helpers. Prefer simple bounded `continue`/`return` control flow; avoid introducing unnecessary `goto`.

## Risks
A speculative timeout/wakeup patch could break valid idle SSH sessions or privilege-separation monitor behavior.

A source patch from this bundle alone would be upstream-hostile because the collected signal is consistent with normal blocking wait behavior.

## Validation
First try from workspace root:

```sh
./configure && make
```

If that fails due to generated files or dependencies, report the exact failure, then run the narrowest relevant build, likely:

```sh
make sshd-session
```

Bounded independent reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

If that reaches a live privsep session, sample the spawned `sshd-session` with `strace -ttT -p <pid>` or a symbolized backtrace. Do not claim `reproduced` unless this shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. Fixer captured `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, one `restart_syscall` strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes.

In OpenSSH, privilege separation means a privileged monitor process remains available for root-only work. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)`, while the session loop uses `ppoll()` through `ptimeout_*`.

I made no source change and rejected the prior `buildpkg.sh` patch because it is unrelated to the sshd-session evidence. Checked conventions/helpers: `README.md`, `README.privsep`, `regress/README.regress`, `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback compile succeeded: `autoreconf && ./configure && make sshd-session` completed and linked `sshd-session`.

Bounded reproduction attempt: `make tests LTESTS=connect-privsep` failed before exercising a privsep session with `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check: `./sshd-session` exited with `sshd-session should not be executed directly`. No command reproduced sustained CPU use or a userspace loop. Final `git status --short` is clean.

## Review Pass 1

RESULT: ok

No source changes remain in the workspace, and `## Git Add Paths` correctly lists `None`.

The author response keeps evidence confidence at `inferred`, does not claim a reproduced OpenSSH bug, and avoids presenting indirect profiler/strace data as a confirmed userspace loop. The validation is acceptable for a no-patch diagnosis: it attempted `./configure && make`, reported the configure-generation blocker, ran a focused `sshd-session` build after `autoreconf`, and attempted `make tests LTESTS=connect-privsep` with the exact blocker.

The write-up also rejects the unrelated prior `buildpkg.sh` patch and names relevant local conventions/helpers. Current `git status --short` and `git diff` are clean.

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem

Fixer observed `sshd-session: gis [priv]` in a runaway-process investigation, but the bundle shows indirect profiler evidence: process state `S`, `wchan=poll_schedule_timeout.constprop.0`, a `poll`/`restart_syscall` stack, one strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. This is consistent with normal privileged monitor blocking, not a confirmed OpenSSH userspace loop.

## Evidence Confidence

inferred

## Proposed Subject

No source patch: require stronger sshd-session loop evidence

## Patch Plan

Do not edit source files in the patch pass unless stronger evidence is collected first. The current evidence is not pull-request-ready for an upstream OpenSSH code change.

Improve/replace the prior Fixer patch by rejecting its unrelated `buildpkg.sh` addition. That prior patch does not address `sshd-session` behavior and should not be carried forward.

Docs/conventions checked: `README.md`, `README.privsep`, `regress/README.regress`; no relevant `CONTRIBUTING`, `HACKING`, `docs/`, or `dev-docs/` guidance was found. Relevant local helpers/conventions include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `atomicio`, `xmalloc`, `ptimeout_*`, and OpenSSH’s poll/ppoll compatibility wrappers. Nearby `monitor.c` and `serverloop.c` intentionally block in `poll(..., -1)`/`ppoll()`.

If later evidence proves a real busy loop, scope the patch to the confirmed loop and keep control flow simple with bounded `return`/`continue`, not avoidable `goto`.

## Risks

A speculative timeout or wakeup change could break valid idle SSH sessions or privilege-separation monitor semantics.

A source patch from this bundle alone would overstate the evidence and be weak for upstream review.

## Validation

First try from workspace root:

```sh
./configure && make
```

If that fails due to generated files or dependencies, report the exact failure and then run the narrowest reproducible fallback, likely:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded independent reproduction attempt, if safe after build:

```sh
make tests LTESTS=connect-privsep
```

Only claim `reproduced` if a command actually shows sustained CPU use or repeated userspace activity attributable to OpenSSH; otherwise keep the result as an inferred no-patch diagnosis.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points to an `sshd-session` privileged monitor sleeping in `poll`, not to a confirmed OpenSSH userspace busy loop.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. The bundle shows `sshd-session: gis [priv]` in state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, a stack through libc `poll`, one `restart_syscall` strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot symbols are kernel memory-management paths rather than symbolized OpenSSH loop frames.

I made no source change and rejected the prior `buildpkg.sh` patch because it is unrelated to the `sshd-session` evidence. Relevant docs/conventions checked: `README.md`, `README.privsep`, `regress/README.regress`; no `CONTRIBUTING`, `HACKING`, `docs/`, or `dev-docs/` guidance was present. Nearby code intentionally blocks in `monitor.c` with `poll(..., -1)` and in `serverloop.c` with `ppoll()` through `ptimeout_*`; local helpers include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `atomicio`, `xmalloc`, and OpenSSH poll/ppoll compatibility wrappers.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback build succeeded:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

The regression did not reproduce the reported CPU/poll signal; it failed during setup with `FATAL: sshd_proxy broken` / `FAIL: sshd_proxy broken` in `regress/regress.log`.

Smoke check:

```sh
./sshd-session
```

It exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. Validation artifacts were cleaned; final `git status --short` is clean.

## Review Pass 1

RESULT: ok

No source changes are present, and `## Git Add Paths` correctly lists `None`.

The response keeps evidence confidence at `inferred`, which matches the indirect profiler/strace evidence. It does not claim a reproduced OpenSSH bug, rejects the unrelated prior `buildpkg.sh` patch, names relevant docs and local helper conventions, and reports the project-level build failure before the focused fallback build.

Validation is acceptable for a no-patch diagnosis: `./configure && make` was attempted and failed for the generated `configure` age issue, `autoreconf && ./configure && make sshd-session` succeeded, and the bounded `connect-privsep` attempt failed before reproducing the CPU signal.

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem

Fixer observed `sshd-session: gis [priv]` in a runaway-process investigation, but the bundle shows indirect profiler evidence: process state `S`, `wchan=poll_schedule_timeout.constprop.0`, a `poll`/`restart_syscall` stack, one strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. This is consistent with normal privileged monitor blocking, not a confirmed OpenSSH userspace loop.

## Evidence Confidence

inferred

## Proposed Subject

No source patch: require stronger sshd-session loop evidence

## Patch Plan

Do not edit source files in the patch pass unless stronger evidence is collected first. The current evidence is not pull-request-ready for an upstream OpenSSH code change.

Improve/replace the prior Fixer patch by rejecting its unrelated `buildpkg.sh` addition. That prior patch does not address `sshd-session` behavior and should not be carried forward.

Docs/conventions checked: `README.md`, `README.privsep`, `regress/README.regress`; no relevant `CONTRIBUTING`, `HACKING`, `docs/`, or `dev-docs/` guidance was found. Relevant local helpers/conventions include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `atomicio`, `xmalloc`, `ptimeout_*`, and OpenSSH’s poll/ppoll compatibility wrappers. Nearby `monitor.c` and `serverloop.c` intentionally block in `poll(..., -1)`/`ppoll()`.

If later evidence proves a real busy loop, scope the patch to the confirmed loop and keep control flow simple with bounded `return`/`continue`, not avoidable `goto`.

## Risks

A speculative timeout or wakeup change could break valid idle SSH sessions or privilege-separation monitor semantics.

A source patch from this bundle alone would overstate the evidence and be weak for upstream review.

## Validation

First try from workspace root:

```sh
./configure && make
```

If that fails due to generated files or dependencies, report the exact failure and then run the narrowest reproducible fallback, likely:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded independent reproduction attempt, if safe after build:

```sh
make tests LTESTS=connect-privsep
```

Only claim `reproduced` if a command actually shows sustained CPU use or repeated userspace activity attributable to OpenSSH; otherwise keep the result as an inferred no-patch diagnosis.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points to an `sshd-session` privileged monitor sleeping in `poll`, not to a confirmed OpenSSH userspace busy loop.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. The bundle shows `sshd-session: gis [priv]` in state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, a stack through libc `poll`, one `restart_syscall` strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot symbols are kernel memory-management paths rather than symbolized OpenSSH loop frames.

I made no source change and rejected the prior `buildpkg.sh` patch because it is unrelated to the `sshd-session` evidence. Relevant docs/conventions checked: `README.md`, `README.privsep`, `regress/README.regress`; no `CONTRIBUTING`, `HACKING`, `docs/`, or `dev-docs/` guidance was present. Nearby code intentionally blocks in `monitor.c` with `poll(..., -1)` and in `serverloop.c` with `ppoll()` through `ptimeout_*`; local helpers include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `atomicio`, `xmalloc`, and OpenSSH poll/ppoll compatibility wrappers.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback build succeeded:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded reproduction attempt:

```sh
make tests LTESTS=connect-privsep
```

The regression did not reproduce the reported CPU/poll signal; it failed during setup with `FATAL: sshd_proxy broken` / `FAIL: sshd_proxy broken` in `regress/regress.log`.

Smoke check:

```sh
./sshd-session
```

It exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. Validation artifacts were cleaned; final `git status --short` is clean.

## Review Pass 1

RESULT: ok

No source changes are present, and `## Git Add Paths` correctly lists `None`.

The response keeps evidence confidence at `inferred`, which matches the indirect profiler/strace evidence. It does not claim a reproduced OpenSSH bug, rejects the unrelated prior `buildpkg.sh` patch, names relevant docs and local helper conventions, and reports the project-level build failure before the focused fallback build.

Validation is acceptable for a no-patch diagnosis: `./configure && make` was attempted and failed for the generated `configure` age issue, `autoreconf && ./configure && make sshd-session` succeeded, and the bounded `connect-privsep` attempt failed before reproducing the CPU signal.

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem

Fixer flagged `sshd-session: gis [priv]` as a possible runaway process, but the bundle shows a sleeping process in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, one strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot symbols are kernel memory-management paths, not symbolized OpenSSH userspace loop frames.

## Evidence Confidence

inferred

## Proposed Subject

No source patch: require stronger sshd-session loop evidence

## Patch Plan

Do not edit source files. The evidence is indirect and does not establish an upstreamable OpenSSH bug.

Improve on the prior Fixer patch by replacing it with a no-patch diagnosis. The prior patch adds an unrelated `buildpkg.sh` Solaris packaging script and should be rejected because it does not address the collected `sshd-session` evidence.

Docs/conventions checked: `README.md`, `README.privsep`, and `regress/README.regress`; no `CONTRIBUTING`, `HACKING`, `docs/`, or `dev-docs/` entry was found. Relevant local conventions/helpers include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)` and in `serverloop.c` via `ppoll()` using `ptimeout_*`.

If stronger evidence later proves a real busy loop, scope any patch to the confirmed loop in `monitor.c`, `serverloop.c`, or the relevant compat wrapper. Prefer clear bounded `continue`/`return` flow matching nearby code; do not introduce avoidable `goto`.

## Risks

A speculative timeout or wakeup change could break valid idle SSH sessions or privilege-separation monitor behavior.

A source patch based only on this bundle would be upstream-hostile because the collected signal is consistent with normal blocking wait behavior.

## Validation

First try the project-level entrypoint from the workspace root:

```sh
./configure && make
```

The workspace timestamps show `configure.ac` is newer than `configure`, so if that command fails with the expected “run autoreconf” blocker, record that exact failure and then use the narrowest reproducible build path:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded independent reproduction attempt, if the build succeeds:

```sh
make tests LTESTS=connect-privsep
```

If that starts a privsep session, sample the spawned `sshd-session` with a short `strace -ttT -p <pid>` or symbolized backtrace. Do not claim `reproduced` unless this shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points to an `sshd-session` privilege-separation monitor sleeping in `poll`, not to a confirmed OpenSSH userspace busy loop. A speculative timeout or wakeup change would risk changing valid idle SSH session behavior without addressing a demonstrated bug.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. The evidence shows `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, a single `restart_syscall` line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The sampled hot symbols are kernel memory-management paths, not symbolized OpenSSH frames.

In OpenSSH, privilege separation means a privileged monitor process remains available for root-only operations. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)`, and the session loop blocks in `ppoll()` through the local `ptimeout_*` helpers.

I made no source change and did not apply the prior `buildpkg.sh` patch because that file is unrelated to the collected `sshd-session` evidence. Docs/conventions checked: `README.md`, `README.privsep`, `regress/README.regress`; no `CONTRIBUTING`, `HACKING`, `docs/`, or `dev-docs/` entry was found. Relevant helpers/conventions include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback build in a temporary copy to avoid dirtying the prepared workspace: `autoreconf && ./configure && make sshd-session` completed and linked `sshd-session`.

Bounded independent reproduction attempt: `make tests LTESTS=connect-privsep` failed before exercising a privsep session: unsafe `/tmp` permissions warning, `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check: `./sshd-session` exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. No command reproduced sustained CPU use or a userspace loop. Final `git status --short` in the prepared workspace is clean.

## Review Pass 1

RESULT: ok

No source changes are present in the workspace, and `## Git Add Paths` correctly lists `None`.

The author response keeps confidence at `inferred`, which matches the indirect profiler/strace evidence. It does not invent a reproducer or claim a confirmed OpenSSH bug, and it explains why the observed sleeping `poll` state is not enough for an upstream source patch.

Validation is adequate for a no-patch diagnosis: it reports the project-level `./configure && make` failure and exact blocker, then a focused `sshd-session` build from a temporary autoreconf checkout, plus a bounded `connect-privsep` reproduction attempt that failed before reaching a running session.

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.148.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem

Fixer flagged `sshd-session: gis [priv]` as a possible runaway process, but the bundle shows a sleeping process in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, one strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot symbols are kernel memory-management paths, not symbolized OpenSSH userspace loop frames.

## Evidence Confidence

inferred

## Proposed Subject

No source patch: require stronger sshd-session loop evidence

## Patch Plan

Do not edit source files. The evidence is indirect and does not establish an upstreamable OpenSSH bug.

Improve on the prior Fixer patch by replacing it with a no-patch diagnosis. The prior patch adds an unrelated `buildpkg.sh` Solaris packaging script and should be rejected because it does not address the collected `sshd-session` evidence.

Docs/conventions checked: `README.md`, `README.privsep`, and `regress/README.regress`; no `CONTRIBUTING`, `HACKING`, `docs/`, or `dev-docs/` entry was found. Relevant local conventions/helpers include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)` and in `serverloop.c` via `ppoll()` using `ptimeout_*`.

If stronger evidence later proves a real busy loop, scope any patch to the confirmed loop in `monitor.c`, `serverloop.c`, or the relevant compat wrapper. Prefer clear bounded `continue`/`return` flow matching nearby code; do not introduce avoidable `goto`.

## Risks

A speculative timeout or wakeup change could break valid idle SSH sessions or privilege-separation monitor behavior.

A source patch based only on this bundle would be upstream-hostile because the collected signal is consistent with normal blocking wait behavior.

## Validation

First try the project-level entrypoint from the workspace root:

```sh
./configure && make
```

The workspace timestamps show `configure.ac` is newer than `configure`, so if that command fails with the expected “run autoreconf” blocker, record that exact failure and then use the narrowest reproducible build path:

```sh
autoreconf && ./configure && make sshd-session
```

Bounded independent reproduction attempt, if the build succeeds:

```sh
make tests LTESTS=connect-privsep
```

If that starts a privsep session, sample the spawned `sshd-session` with a short `strace -ttT -p <pid>` or symbolized backtrace. Do not claim `reproduced` unless this shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points to an `sshd-session` privilege-separation monitor sleeping in `poll`, not to a confirmed OpenSSH userspace busy loop. A speculative timeout or wakeup change would risk changing valid idle SSH session behavior without addressing a demonstrated bug.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. The evidence shows `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, a single `restart_syscall` line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The sampled hot symbols are kernel memory-management paths, not symbolized OpenSSH frames.

In OpenSSH, privilege separation means a privileged monitor process remains available for root-only operations. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)`, and the session loop blocks in `ppoll()` through the local `ptimeout_*` helpers.

I made no source change and did not apply the prior `buildpkg.sh` patch because that file is unrelated to the collected `sshd-session` evidence. Docs/conventions checked: `README.md`, `README.privsep`, `regress/README.regress`; no `CONTRIBUTING`, `HACKING`, `docs/`, or `dev-docs/` entry was found. Relevant helpers/conventions include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH poll/ppoll compatibility wrappers.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback build in a temporary copy to avoid dirtying the prepared workspace: `autoreconf && ./configure && make sshd-session` completed and linked `sshd-session`.

Bounded independent reproduction attempt: `make tests LTESTS=connect-privsep` failed before exercising a privsep session: unsafe `/tmp` permissions warning, `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check: `./sshd-session` exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. No command reproduced sustained CPU use or a userspace loop. Final `git status --short` in the prepared workspace is clean.

## Review Pass 1

RESULT: ok

No source changes are present in the workspace, and `## Git Add Paths` correctly lists `None`.

The author response keeps confidence at `inferred`, which matches the indirect profiler/strace evidence. It does not invent a reproducer or claim a confirmed OpenSSH bug, and it explains why the observed sleeping `poll` state is not enough for an upstream source patch.

Validation is adequate for a no-patch diagnosis: it reports the project-level `./configure && make` failure and exact blocker, then a focused `sshd-session` build from a temporary autoreconf checkout, plus a bounded `connect-privsep` reproduction attempt that failed before reaching a running session.

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.145.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`, `make` and, if available, `make check`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem

Fixer observed `sshd-session: gis [priv]` in a runaway-process investigation, but the embedded evidence shows a sleeping process in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, one strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot symbols are kernel memory-management paths, not a symbolized OpenSSH userspace loop.

## Evidence Confidence

inferred

## Proposed Subject

No source patch: require stronger sshd-session loop evidence

## Patch Plan

Do not edit source files. The evidence is indirect and does not establish an OpenSSH bug suitable for an upstream patch.

Replace/improve the prior Fixer attempt by keeping it artifact-free and rejecting the unrelated `buildpkg.sh` addition from `prior-best.patch`. Keep the result as a no-patch diagnosis unless stronger evidence is collected.

Docs/conventions checked: `README.md`, `README.privsep`, and `regress/README.regress`. Relevant local conventions/helpers include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH’s poll/ppoll compatibility wrappers. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)` and in `server_loop2()` via `ppoll()` using `ptimeout_*`.

If later evidence proves a real busy loop, scope any patch to the confirmed loop in `monitor.c`, `serverloop.c`, or the relevant compat wrapper. Prefer bounded `continue`/`return` control flow matching nearby code; do not introduce avoidable `goto`.

## Risks

A speculative timeout or wakeup change could break valid idle SSH sessions or privilege-separation monitor behavior.

A source patch based only on this evidence would be upstream-hostile because the collected signal is consistent with normal blocking wait behavior.

## Validation

First try the project entrypoint from the workspace root:

```sh
./configure && make
```

If it fails because generated files or dependencies are missing, record the exact command and failure reason, then run the narrowest relevant build such as:

```sh
make sshd-session
```

Bounded independent evidence attempt, if the build succeeds:

```sh
make tests LTESTS=connect-privsep
```

If a test session is available, sample the spawned `sshd-session` with `strace -ttT -p <pid>` and/or a symbolized backtrace. Do not claim `reproduced` unless this shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop. A speculative timeout or wakeup change would risk changing valid idle SSH session behavior without addressing a demonstrated bug.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. The evidence shows `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, a single `restart_syscall` line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The sampled hot symbols are kernel memory-management paths, not symbolized OpenSSH frames.

In OpenSSH, privilege separation means a privileged monitor process remains available for root-only operations. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)` for monitor/log fds, and the session loop blocks in `ppoll()` through the local `ptimeout_*` helpers.

I made no source change and did not apply the prior `buildpkg.sh` patch, because that file is unrelated to the collected sshd-session evidence and would not be upstream-ready. Local conventions checked include `README.md`, `README.privsep`, `regress/README.regress`, `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and the OpenSSH poll/ppoll compatibility wrappers. No helper was needed because no code is changing.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback compile: `autoreconf && ./configure && make sshd-session` completed and linked `sshd-session`.

Bounded independent reproduction attempt: `make tests LTESTS=connect-privsep` failed before exercising a privsep session: `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check: `./sshd-session` exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. No command reproduced sustained CPU use or a userspace loop.

Validation artifacts were removed; final `git status --short` is clean.

## Review Pass 1

RESULT: ok

No changed paths remain in the workspace, and `## Git Add Paths` correctly lists `None`.

The response keeps `## Evidence Confidence` at `inferred`, does not claim a reproduced OpenSSH bug, and explains why the profiler/strace evidence is insufficient for an upstream source patch. It also rejects the unrelated prior `buildpkg.sh` patch and names relevant local conventions/helpers.

Validation is acceptable for a no-patch diagnosis: it reports the project-level `./configure && make` blocker, a focused `sshd-session` build after `autoreconf`, and a bounded reproduction attempt that failed before reaching a privsep session.

Diff

--- a/buildpkg.sh	1970-01-01 04:00:00.000000000 +0400
+++ b/buildpkg.sh	2026-05-10 11:49:02.013074241 +0400
@@ -0,0 +1,677 @@
+#!/bin/sh
+#
+# Fake Root Solaris/SVR4/SVR5 Build System - Prototype
+#
+# The following code has been provide under Public Domain License.  I really
+# don't care what you use it for.  Just as long as you don't complain to me
+# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
+#
+umask 022
+#
+# Options for building the package
+# You can create a openssh-config.local with your customized options
+#
+REMOVE_FAKE_ROOT_WHEN_DONE=yes
+#
+# uncommenting TEST_DIR and using
+# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
+# and
+# PKGNAME=tOpenSSH should allow testing a package without interfering
+# with a real OpenSSH package on a system. This is not needed on systems
+# that support the -R option to pkgadd.
+#TEST_DIR=/var/tmp	# leave commented out for production build
+PKGNAME=OpenSSH
+# revisions within the same version (REV=a)
+#REV=
+SYSVINIT_NAME=opensshd
+AWK=${AWK:="nawk"}
+MAKE=${MAKE:="make"}
+SSHDUID=67	# Default privsep uid
+SSHDGID=67	# Default privsep gid
+# uncomment these next three as needed
+#PERMIT_ROOT_LOGIN=no
+#X11_FORWARDING=yes
+#USR_LOCAL_IS_SYMLINK=yes
+# System V init run levels
+SYSVINITSTART=S98
+SYSVINITSTOP=K30
+# We will source these if they exist
+POST_MAKE_INSTALL_FIXES=./pkg-post-make-install-fixes.sh
+POST_PROTOTYPE_EDITS=./pkg-post-prototype-edit.sh
+# We'll be one level deeper looking for these
+PKG_PREINSTALL_LOCAL=../pkg-preinstall.local
+PKG_POSTINSTALL_LOCAL=../pkg-postinstall.local
+PKG_PREREMOVE_LOCAL=../pkg-preremove.local
+PKG_POSTREMOVE_LOCAL=../pkg-postremove.local
+PKG_REQUEST_LOCAL=../pkg-request.local
+# end of sourced files
+#
+OPENSSHD=opensshd.init
+OPENSSH_MANIFEST=openssh.xml
+OPENSSH_FMRI=svc:/site/${SYSVINIT_NAME}:default
+SMF_METHOD_DIR=/lib/svc/method/site
+SMF_MANIFEST_DIR=/var/svc/manifest/site
+
+PATH_GROUPADD_PROG=/usr/sbin/groupadd
+PATH_USERADD_PROG=/usr/sbin/useradd
+PATH_PASSWD_PROG=/usr/bin/passwd
+#
+# list of system directories we do NOT want to change owner/group/perms
+# when installing our package
+SYSTEM_DIR="/etc	\
+/etc/init.d		\
+/etc/rcS.d		\
+/etc/rc0.d		\
+/etc/rc1.d		\
+/etc/rc2.d		\
+/etc/opt		\
+/lib			\
+/lib/svc		\
+/lib/svc/method		\
+/lib/svc/method/site	\
+/opt			\
+/opt/bin		\
+/usr			\
+/usr/bin		\
+/usr/lib		\
+/usr/sbin		\
+/usr/share		\
+/usr/share/man		\
+/usr/share/man/man1	\
+/usr/share/man/man8	\
+/usr/local		\
+/usr/local/bin		\
+/usr/local/etc		\
+/usr/local/libexec	\
+/usr/local/man		\
+/usr/local/man/man1	\
+/usr/local/man/man8	\
+/usr/local/sbin		\
+/usr/local/share	\
+/var			\
+/var/opt		\
+/var/run		\
+/var/svc		\
+/var/svc/manifest	\
+/var/svc/manifest/site  \
+/var/tmp		\
+/tmp"
+
+# We may need to build as root so we make sure PATH is set up
+# only set the path if it's not set already
+[ -d /opt/bin ]  &&  {
+	echo $PATH | grep ":/opt/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/opt/bin
+}
+[ -d /usr/local/bin ]  &&  {
+	echo $PATH | grep ":/usr/local/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
+}
+[ -d /usr/ccs/bin ]  &&  {
+	echo $PATH | grep ":/usr/ccs/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
+}
+export PATH
+#
+
+[ -f Makefile ]  ||  {
+	echo "Please run this script from your build directory"
+	exit 1
+}
+
+# we will look for openssh-config.local to override the above options
+[ -s ./openssh-config.local ]  &&  . ./openssh-config.local
+
+START=`pwd`
+FAKE_ROOT=$START/pkg
+
+## Fill in some details, like prefix and sysconfdir
+for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir
+do
+	eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
+done
+
+## Are we using Solaris' SMF?
+DO_SMF=0
+if egrep "^#define USE_SOLARIS_PROCESS_CONTRACTS" config.h > /dev/null 2>&1
+then
+	DO_SMF=1
+fi
+
+## Collect value of privsep user
+for confvar in SSH_PRIVSEP_USER
+do
+	eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
+done
+
+## Set privsep defaults if not defined
+if [ -z "$SSH_PRIVSEP_USER" ]
+then
+	SSH_PRIVSEP_USER=sshd
+fi
+
+## Extract common info requires for the 'info' part of the package.
+VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'`
+
+ARCH=`uname -m`
+DEF_MSG="\n"
+OS_VER=`uname -v`
+SCRIPT_SHELL=/sbin/sh
+UNAME_R=`uname -r`
+UNAME_S=`uname -s`
+case ${UNAME_S} in
+	SunOS)	UNAME_S=Solaris
+		OS_VER=${UNAME_R}
+		ARCH=`uname -p`
+		RCS_D=yes
+		DEF_MSG="(default: n)"
+		;;
+	SCO_SV)	case ${UNAME_R} in
+			3.2)	UNAME_S=OpenServer5
+		OS_VER=`uname -X | grep Release | sed -e 's/^Rel.*3.2v//'`
+				;;
+			5)	UNAME_S=OpenServer6
+				;;
+		esac
+		SCRIPT_SHELL=/bin/sh
+		RC1_D=no
+		DEF_MSG="(default: n)"
+		;;
+esac
+
+case `basename $0` in
+	buildpkg.sh)
+## Start by faking root install
+echo "Faking root install..."
+[ -d $FAKE_ROOT ]  &&  rm -fr $FAKE_ROOT
+mkdir $FAKE_ROOT
+${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
+if [ $? -gt 0 ]
+then
+	echo "Fake root install failed, stopping."
+	exit 1
+fi
+
+## Setup our run level stuff while we are at it.
+if [ $DO_SMF -eq 1 ]
+then
+	# For Solaris' SMF, /lib/svc/method/site is the preferred place
+	# for start/stop scripts that aren't supplied with the OS, and
+	# similarly /var/svc/manifest/site for manifests.
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+
+	cat ${OPENSSH_MANIFEST} | \
+	    sed -e "s|__SYSVINIT_NAME__|${SYSVINIT_NAME}|" \
+	    -e "s|__SMF_METHOD_DIR__|${SMF_METHOD_DIR}|" \
+	    > $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+	chmod 644 $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+fi
+
+[ "${PERMIT_ROOT_LOGIN}" = no ]  &&  \
+	perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+[ "${X11_FORWARDING}" = yes ]  &&  \
+	perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+# fix PrintMotd
+perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
+	$FAKE_ROOT${sysconfdir}/sshd_config
+
+# We don't want to overwrite config files on multiple installs
+mv $FAKE_ROOT${sysconfdir}/ssh_config $FAKE_ROOT${sysconfdir}/ssh_config.default
+mv $FAKE_ROOT${sysconfdir}/sshd_config $FAKE_ROOT${sysconfdir}/sshd_config.default
+
+# local tweeks here
+[ -s "${POST_MAKE_INSTALL_FIXES}" ]  &&  . ${POST_MAKE_INSTALL_FIXES}
+
+cd $FAKE_ROOT
+
+## Ok, this is outright wrong, but it will work.  I'm tired of pkgmk
+## whining.
+for i in *; do
+  PROTO_ARGS="$PROTO_ARGS $i=/$i";
+done
+
+## Build info file
+echo "Building pkginfo file..."
+cat > pkginfo << _EOF
+PKG=$PKGNAME
+NAME="OpenSSH Portable for ${UNAME_S}"
+DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
+VENDOR="OpenSSH Portable Team - https://www.openssh.com/portable.html"
+ARCH=$ARCH
+VERSION=$VERSION$REV
+CATEGORY="Security,application"
+BASEDIR=/
+CLASSES="none"
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+
+## Build empty depend file that may get updated by $POST_PROTOTYPE_EDITS
+echo "Building depend file..."
+touch depend
+
+## Build space file
+echo "Building space file..."
+if [ $DO_SMF -eq 1 ]
+then
+	# XXX Is this necessary?  If not, remove space line from mk-proto.awk.
+	touch space
+else
+	cat > space << _EOF
+# extra space required by start/stop links added by installf
+# in postinstall
+$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1
+$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME} 0 1
+_EOF
+	[ "$RC1_D" = no ]  ||  \
+	echo "$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+	[ "$RCS_D" = yes ]  &&  \
+	echo "$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+fi
+
+## Build preinstall file
+echo "Building preinstall file..."
+cat > preinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+_EOF
+
+# local preinstall changes here
+[ -s "${PKG_PREINSTALL_LOCAL}" ]  &&  . ${PKG_PREINSTALL_LOCAL}
+
+cat >> preinstall << _EOF
+#
+if [ "\${PRE_INS_STOP}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm disable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+	fi
+fi
+
+exit 0
+_EOF
+
+## Build postinstall file
+echo "Building postinstall file..."
+cat > postinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
+
+# make rc?.d dirs only if we are doing a test install
+[ -n "${TEST_DIR}" ]  &&  [ $DO_SMF -ne 1 ] && {
+	[ "$RCS_D" = yes ]  &&  mkdir -p ${TEST_DIR}/etc/rcS.d
+	mkdir -p ${TEST_DIR}/etc/rc0.d
+	[ "$RC1_D" = no ]  ||  mkdir -p ${TEST_DIR}/etc/rc1.d
+	mkdir -p ${TEST_DIR}/etc/rc2.d
+}
+
+if [ $DO_SMF -eq 1 ]
+then
+	# Delete the existing service, if it exists, then import the
+	# new one.
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+	# NOTE, The manifest disables sshd by default.
+	svccfg import ${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	if [ "\${USE_SYM_LINKS}" = yes ]
+	then
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+	else
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+	fi
+fi
+
+# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
+[ -d $piddir ]  ||  installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 0755 root sys
+
+_EOF
+
+# local postinstall changes here
+[ -s "${PKG_POSTINSTALL_LOCAL}" ]  &&  . ${PKG_POSTINSTALL_LOCAL}
+
+cat >> postinstall << _EOF
+installf -f ${PKGNAME}
+
+# Use chroot to handle PKG_INSTALL_ROOT
+if [ ! -z "\${PKG_INSTALL_ROOT}" ]
+then
+	chroot="chroot \${PKG_INSTALL_ROOT}"
+fi
+# If this is a test build, we will skip the groupadd/useradd/passwd commands
+if [ ! -z "${TEST_DIR}" ]
+then
+	chroot=echo
+fi
+
+	echo "PrivilegeSeparation user always required."
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
+	then
+		echo "PrivSep user $SSH_PRIVSEP_USER already exists."
+		SSH_PRIVSEP_GROUP=\`grep "^$SSH_PRIVSEP_USER:" \${PKG_INSTALL_ROOT}/etc/passwd | awk -F: '{print \$4}'\`
+		SSH_PRIVSEP_GROUP=\`grep ":\$SSH_PRIVSEP_GROUP:" \${PKG_INSTALL_ROOT}/etc/group | awk -F: '{print \$1}'\`
+	else
+		DO_PASSWD=yes
+	fi
+	[ -z "\$SSH_PRIVSEP_GROUP" ]  &&  SSH_PRIVSEP_GROUP=$SSH_PRIVSEP_USER
+
+	# group required?
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'\$SSH_PRIVSEP_GROUP'\$' >/dev/null
+	then
+		echo "PrivSep group \$SSH_PRIVSEP_GROUP already exists."
+	else
+		DO_GROUP=yes
+	fi
+
+	# create group if required
+	[ "\$DO_GROUP" = yes ]  &&  {
+		# Use gid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
+		then
+			:
+		else
+			sshdgid="-g $SSHDGID"
+		fi
+		echo "Creating PrivSep group \$SSH_PRIVSEP_GROUP."
+		\$chroot ${PATH_GROUPADD_PROG} \$sshdgid \$SSH_PRIVSEP_GROUP
+	}
+
+	# Create user if required
+	[ "\$DO_PASSWD" = yes ]  &&  {
+		# Use uid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDUID'\$' >/dev/null
+		then
+			:
+		else
+			sshduid="-u $SSHDUID"
+		fi
+		echo "Creating PrivSep user $SSH_PRIVSEP_USER."
+		\$chroot ${PATH_USERADD_PROG} -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
+		\$chroot ${PATH_PASSWD_PROG} -l $SSH_PRIVSEP_USER
+	}
+
+if [ "\${POST_INS_START}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm enable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
+	fi
+fi
+exit 0
+_EOF
+
+## Build preremove file
+echo "Building preremove file..."
+cat > preremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	svcadm disable $OPENSSH_FMRI
+else
+	${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+fi
+_EOF
+
+# local preremove changes here
+[ -s "${PKG_PREREMOVE_LOCAL}" ]  &&  . ${PKG_PREREMOVE_LOCAL}
+
+cat >> preremove << _EOF
+exit 0
+_EOF
+
+## Build postremove file
+echo "Building postremove file..."
+cat > postremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+fi
+_EOF
+
+# local postremove changes here
+[ -s "${PKG_POSTREMOVE_LOCAL}" ]  &&  . ${PKG_POSTREMOVE_LOCAL}
+
+cat >> postremove << _EOF
+exit 0
+_EOF
+
+## Build request file
+echo "Building request file..."
+cat > request << _EOF
+trap 'exit 3' 15
+
+_EOF
+
+[ -x /usr/bin/ckyorn ]  ||  cat >> request << _EOF
+
+ckyorn() {
+# for some strange reason OpenServer5 has no ckyorn
+# We build a striped down version here
+
+DEFAULT=n
+PROMPT="Yes or No [yes,no,?,quit]"
+HELP_PROMPT="        Enter y or yes if your answer is yes; n or no if your answer is no."
+USAGE="usage: ckyorn [options]
+where options may include:
+        -d default
+        -h help
+        -p prompt
+"
+
+if [ \$# != 0 ]
+then
+	while getopts d:p:h: c
+	do
+		case \$c in
+			h)	HELP_PROMPT="\$OPTARG" ;;
+			d)	DEFAULT=\$OPTARG ;;
+			p)	PROMPT=\$OPTARG ;;
+			\\?)	echo "\$USAGE" 1>&2
+				exit 1 ;;
+		esac
+	done
+	shift \`expr \$OPTIND - 1\`
+fi
+
+while true
+do
+	echo "\${PROMPT}\\c " 1>&2
+	read key
+	[ -z "\$key" ]  &&  key=\$DEFAULT
+	case \$key in
+		[n,N]|[n,N][o,O]|[y,Y]|[y,Y][e,E][s,S])	echo "\${key}\\c"
+			exit 0 ;;
+		\\?)	echo \$HELP_PROMPT 1>&2 ;;
+		q|quit)	echo "q\\c" 1>&2
+			exit 3 ;;
+	esac
+done
+
+}
+
+_EOF
+
+if [ $DO_SMF -eq 1 ]
+then
+	# This could get hairy, as the running sshd may not be under SMF.
+	# We'll assume an earlier version of OpenSSH started via SMF.
+	cat >> request << _EOF
+PRE_INS_STOP=no
+POST_INS_START=no
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  ] && \\
+    /usr/bin/svcs -H $OPENSSH_FMRI 2>&1 | egrep "^online" > /dev/null 2>&1
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+else
+	cat >> request << _EOF
+USE_SYM_LINKS=no
+PRE_INS_STOP=no
+POST_INS_START=no
+# Use symbolic links?
+ans=\`ckyorn -d n \\
+-p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$?
+case \$ans in
+	[y,Y]*)	USE_SYM_LINKS=yes ;;
+esac
+
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  -a  -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+USE_SYM_LINKS='\$USE_SYM_LINKS'
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+fi
+
+# local request changes here
+[ -s "${PKG_REQUEST_LOCAL}" ]  &&  . ${PKG_REQUEST_LOCAL}
+
+cat >> request << _EOF
+exit 0
+
+_EOF
+
+## Next Build our prototype
+echo "Building prototype file..."
+cat >mk-proto.awk << _EOF
+	    BEGIN { print "i pkginfo"; print "i depend"; \\
+		    print "i preinstall"; print "i postinstall"; \\
+ 		    print "i preremove"; print "i postremove"; \\
+		    print "i request"; print "i space"; \\
+		    split("$SYSTEM_DIR",sys_files); }
+	    {
+	     for (dir in sys_files) { if ( \$3 != sys_files[dir] )
+		     { if ( \$1 == "s" )
+			{ \$5=""; \$6=""; }
+		     else
+			{ \$5="root"; \$6="sys"; }
+		     }
+		else
+		     { \$4="?"; \$5="?"; \$6="?"; break;}
+	    } }
+	    { print; }
+_EOF
+
+find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \
+	pkgproto $PROTO_ARGS | ${AWK} -f mk-proto.awk > prototype
+
+# /usr/local is a symlink on some systems
+[ "${USR_LOCAL_IS_SYMLINK}" = yes ]  &&  {
+	grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
+	mv prototype.new prototype
+}
+
+## Step back a directory and now build the package.
+cd ..
+# local prototype tweeks here
+[ -s "${POST_PROTOTYPE_EDITS}" ]  &&  . ${POST_PROTOTYPE_EDITS}
+
+echo "Building package.."
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+	justpkg.sh)
+rm -fr ${FAKE_ROOT}/${PKGNAME}
+grep -v "^PSTAMP=" $FAKE_ROOT/pkginfo > $$tmp
+mv $$tmp $FAKE_ROOT/pkginfo
+cat >> $FAKE_ROOT/pkginfo << _EOF
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+esac
+
+[ "${REMOVE_FAKE_ROOT_WHEN_DONE}" = yes ]  &&  rm -rf $FAKE_ROOT
+exit 0
+
--- a/config.h.in~	1970-01-01 04:00:00.000000000 +0400
+++ b/config.h.in~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,2107 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
+/* Define if you have a getaddrinfo that fails for the all-zeros IPv6 address
+   */
+#undef AIX_GETNAMEINFO_HACK
+
+/* Define if your AIX loginfailed() function takes 4 arguments (AIX >= 5.2) */
+#undef AIX_LOGINFAILED_4ARG
+
+/* System only supports IPv4 audit records */
+#undef AU_IPv4
+
+/* Define if your resolver libs need this for getrrsetbyname */
+#undef BIND_8_COMPAT
+
+/* The system has incomplete BSM API */
+#undef BROKEN_BSM_API
+
+/* broken in chroots on older kernels */
+#undef BROKEN_CLOSEFROM
+
+/* Define if cmsg_type is not passed correctly */
+#undef BROKEN_CMSG_TYPE
+
+/* getaddrinfo is broken (if present) */
+#undef BROKEN_GETADDRINFO
+
+/* getgroups(0,NULL) will return -1 */
+#undef BROKEN_GETGROUPS
+
+/* getline is not what we expect */
+#undef BROKEN_GETLINE
+
+/* Do not use system glob */
+#undef BROKEN_GLOB
+
+/* Define if you system's inet_ntoa is busted (e.g. Irix gcc issue) */
+#undef BROKEN_INET_NTOA
+
+/* Define if your struct dirent expects you to allocate extra space for d_name
+   */
+#undef BROKEN_ONE_BYTE_DIRENT_D_NAME
+
+/* System poll(2) implementation is broken */
+#undef BROKEN_POLL
+
+/* Can't do comparisons on readv */
+#undef BROKEN_READV_COMPARISON
+
+/* NetBSD read function is sometimes redirected, breaking atomicio comparisons
+   against it */
+#undef BROKEN_READ_COMPARISON
+
+/* Needed for NeXT */
+#undef BROKEN_SAVED_UIDS
+
+/* Define if your setregid() is broken */
+#undef BROKEN_SETREGID
+
+/* Define if your setresgid() is broken */
+#undef BROKEN_SETRESGID
+
+/* Define if your setresuid() is broken */
+#undef BROKEN_SETRESUID
+
+/* Define if your setreuid() is broken */
+#undef BROKEN_SETREUID
+
+/* LynxOS has broken setvbuf() implementation */
+#undef BROKEN_SETVBUF
+
+/* QNX shadow support is broken */
+#undef BROKEN_SHADOW_EXPIRE
+
+/* Define if your snprintf is busted */
+#undef BROKEN_SNPRINTF
+
+/* strndup broken, see APAR IY61211 */
+#undef BROKEN_STRNDUP
+
+/* strnlen broken, see APAR IY62551 */
+#undef BROKEN_STRNLEN
+
+/* strnvis detected broken */
+#undef BROKEN_STRNVIS
+
+/* tcgetattr with ICANON may hang */
+#undef BROKEN_TCGETATTR_ICANON
+
+/* updwtmpx is broken (if present) */
+#undef BROKEN_UPDWTMPX
+
+/* Define if you have BSD auth support */
+#undef BSD_AUTH
+
+/* Define if you want to specify the path to your lastlog file */
+#undef CONF_LASTLOG_FILE
+
+/* Define if you want to specify the path to your utmp file */
+#undef CONF_UTMP_FILE
+
+/* Define if you want to specify the path to your wtmpx file */
+#undef CONF_WTMPX_FILE
+
+/* Define if you want to specify the path to your wtmp file */
+#undef CONF_WTMP_FILE
+
+/* Need to call setpgrp as root */
+#undef DISABLE_FD_PASSING
+
+/* Define if you don't want to use lastlog */
+#undef DISABLE_LASTLOG
+
+/* Define if you don't want to use your system's login() call */
+#undef DISABLE_LOGIN
+
+/* Define if you don't want to use pututline() etc. to write [uw]tmp */
+#undef DISABLE_PUTUTLINE
+
+/* Define if you don't want to use pututxline() etc. to write [uw]tmpx */
+#undef DISABLE_PUTUTXLINE
+
+/* Define if you want to disable shadow passwords */
+#undef DISABLE_SHADOW
+
+/* Define if you don't want to use utmp */
+#undef DISABLE_UTMP
+
+/* Define if you don't want to use utmpx */
+#undef DISABLE_UTMPX
+
+/* Define if you don't want to use wtmp */
+#undef DISABLE_WTMP
+
+/* Define if you don't want to use wtmpx */
+#undef DISABLE_WTMPX
+
+/* Enable for PKCS#11 support */
+#undef ENABLE_PKCS11
+
+/* Enable for U2F/FIDO support */
+#undef ENABLE_SK
+
+/* Enable for built-in U2F/FIDO support */
+#undef ENABLE_SK_INTERNAL
+
+/* define if fflush(NULL) does not work */
+#undef FFLUSH_NULL_BUG
+
+/* File names may not contain backslash characters */
+#undef FILESYSTEM_NO_BACKSLASH
+
+/* fsid_t has member val */
+#undef FSID_HAS_VAL
+
+/* fsid_t has member __val */
+#undef FSID_HAS___VAL
+
+/* getpgrp takes one arg */
+#undef GETPGRP_VOID
+
+/* Conflicting defs for getspnam */
+#undef GETSPNAM_CONFLICTING_DEFS
+
+/* Define if your system glob() function has the GLOB_ALTDIRFUNC extension */
+#undef GLOB_HAS_ALTDIRFUNC
+
+/* Define if your system glob() function has gl_matchc options in glob_t */
+#undef GLOB_HAS_GL_MATCHC
+
+/* Define if your system glob() function has gl_statv options in glob_t */
+#undef GLOB_HAS_GL_STATV
+
+/* Define this if you want GSSAPI support in the version 2 protocol */
+#undef GSSAPI
+
+/* Define if you want to use shadow password expire field */
+#undef HAS_SHADOW_EXPIRE
+
+/* Define if your system uses access rights style file descriptor passing */
+#undef HAVE_ACCRIGHTS_IN_MSGHDR
+
+/* Define if you have ut_addr in utmp.h */
+#undef HAVE_ADDR_IN_UTMP
+
+/* Define if you have ut_addr in utmpx.h */
+#undef HAVE_ADDR_IN_UTMPX
+
+/* Define if you have ut_addr_v6 in utmp.h */
+#undef HAVE_ADDR_V6_IN_UTMP
+
+/* Define if you have ut_addr_v6 in utmpx.h */
+#undef HAVE_ADDR_V6_IN_UTMPX
+
+/* Define to 1 if you have the `arc4random' function. */
+#undef HAVE_ARC4RANDOM
+
+/* Define to 1 if you have the `arc4random_buf' function. */
+#undef HAVE_ARC4RANDOM_BUF
+
+/* Define to 1 if you have the `arc4random_stir' function. */
+#undef HAVE_ARC4RANDOM_STIR
+
+/* Define to 1 if you have the `arc4random_uniform' function. */
+#undef HAVE_ARC4RANDOM_UNIFORM
+
+/* Define to 1 if you have the `asprintf' function. */
+#undef HAVE_ASPRINTF
+
+/* OpenBSD's gcc has bounded */
+#undef HAVE_ATTRIBUTE__BOUNDED__
+
+/* Have attribute nonnull */
+#undef HAVE_ATTRIBUTE__NONNULL__
+
+/* compiler supports nonstring attribute */
+#undef HAVE_ATTRIBUTE__NONSTRING__
+
+/* OpenBSD's gcc has sentinel */
+#undef HAVE_ATTRIBUTE__SENTINEL__
+
+/* Define to 1 if you have the `aug_get_machine' function. */
+#undef HAVE_AUG_GET_MACHINE
+
+/* Define to 1 if you have the `auth_hostok' function. */
+#undef HAVE_AUTH_HOSTOK
+
+/* Define to 1 if you have the `auth_timeok' function. */
+#undef HAVE_AUTH_TIMEOK
+
+/* Define to 1 if you have the `b64_ntop' function. */
+#undef HAVE_B64_NTOP
+
+/* Define to 1 if you have the `b64_pton' function. */
+#undef HAVE_B64_PTON
+
+/* Define if you have the basename function. */
+#undef HAVE_BASENAME
+
+/* Define to 1 if you have the `bcopy' function. */
+#undef HAVE_BCOPY
+
+/* Define to 1 if you have the `bcrypt_pbkdf' function. */
+#undef HAVE_BCRYPT_PBKDF
+
+/* Define to 1 if you have the `bindresvport_sa' function. */
+#undef HAVE_BINDRESVPORT_SA
+
+/* Define to 1 if you have the `blf_enc' function. */
+#undef HAVE_BLF_ENC
+
+/* Define to 1 if you have the <blf.h> header file. */
+#undef HAVE_BLF_H
+
+/* Define to 1 if you have the `Blowfish_expand0state' function. */
+#undef HAVE_BLOWFISH_EXPAND0STATE
+
+/* Define to 1 if you have the `Blowfish_expandstate' function. */
+#undef HAVE_BLOWFISH_EXPANDSTATE
+
+/* Define to 1 if you have the `Blowfish_initstate' function. */
+#undef HAVE_BLOWFISH_INITSTATE
+
+/* Define to 1 if you have the `Blowfish_stream2word' function. */
+#undef HAVE_BLOWFISH_STREAM2WORD
+
+/* Define to 1 if you have the `BN_is_prime_ex' function. */
+#undef HAVE_BN_IS_PRIME_EX
+
+/* Define to 1 if you have the <bsd/libutil.h> header file. */
+#undef HAVE_BSD_LIBUTIL_H
+
+/* Define to 1 if you have the <bsm/audit.h> header file. */
+#undef HAVE_BSM_AUDIT_H
+
+/* Define to 1 if you have the <bstring.h> header file. */
+#undef HAVE_BSTRING_H
+
+/* Define to 1 if you have the `bzero' function. */
+#undef HAVE_BZERO
+
+/* calloc(0, x) returns NULL */
+#undef HAVE_CALLOC
+
+/* Define if you have caph_cache_tzdata */
+#undef HAVE_CAPH_CACHE_TZDATA
+
+/* Define to 1 if you have the <capsicum_helpers.h> header file. */
+#undef HAVE_CAPSICUM_HELPERS_H
+
+/* Define to 1 if you have the `cap_rights_limit' function. */
+#undef HAVE_CAP_RIGHTS_LIMIT
+
+/* Define to 1 if you have the `clock' function. */
+#undef HAVE_CLOCK
+
+/* Have clock_gettime */
+#undef HAVE_CLOCK_GETTIME
+
+/* define if you have clock_t data type */
+#undef HAVE_CLOCK_T
+
+/* Define to 1 if you have the `closefrom' function. */
+#undef HAVE_CLOSEFROM
+
+/* Define to 1 if you have the `close_range' function. */
+#undef HAVE_CLOSE_RANGE
+
+/* Define if gai_strerror() returns const char * */
+#undef HAVE_CONST_GAI_STRERROR_PROTO
+
+/* Define if your system uses ancillary data style file descriptor passing */
+#undef HAVE_CONTROL_IN_MSGHDR
+
+/* Define to 1 if you have the `crypt' function. */
+#undef HAVE_CRYPT
+
+/* Define to 1 if you have the <crypto/sha2.h> header file. */
+#undef HAVE_CRYPTO_SHA2_H
+
+/* Define to 1 if you have the <crypt.h> header file. */
+#undef HAVE_CRYPT_H
+
+/* Define if you are on Cygwin */
+#undef HAVE_CYGWIN
+
+/* Define if your libraries define daemon() */
+#undef HAVE_DAEMON
+
+/* Define to 1 if you have the declaration of `AI_NUMERICSERV', and to 0 if
+   you don't. */
+#undef HAVE_DECL_AI_NUMERICSERV
+
+/* Define to 1 if you have the declaration of `authenticate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_AUTHENTICATE
+
+/* Define to 1 if you have the declaration of `bzero', and to 0 if you don't.
+   */
+#undef HAVE_DECL_BZERO
+
+/* Define to 1 if you have the declaration of `ftruncate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_FTRUNCATE
+
+/* Define to 1 if you have the declaration of `getentropy', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETENTROPY
+
+/* Define to 1 if you have the declaration of `getpeereid', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETPEEREID
+
+/* Define to 1 if you have the declaration of `GLOB_NOMATCH', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GLOB_NOMATCH
+
+/* Define to 1 if you have the declaration of `GSS_C_NT_HOSTBASED_SERVICE',
+   and to 0 if you don't. */
+#undef HAVE_DECL_GSS_C_NT_HOSTBASED_SERVICE
+
+/* Define to 1 if you have the declaration of `howmany', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HOWMANY
+
+/* Define to 1 if you have the declaration of `htole64', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HTOLE64
+
+/* Define to 1 if you have the declaration of `h_errno', and to 0 if you
+   don't. */
+#undef HAVE_DECL_H_ERRNO
+
+/* Define to 1 if you have the declaration of `INFINITY', and to 0 if you
+   don't. */
+#undef HAVE_DECL_INFINITY
+
+/* Define to 1 if you have the declaration of `le32toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE32TOH
+
+/* Define to 1 if you have the declaration of `le64toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE64TOH
+
+/* Define to 1 if you have the declaration of `loginfailed', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINFAILED
+
+/* Define to 1 if you have the declaration of `loginrestrictions', and to 0 if
+   you don't. */
+#undef HAVE_DECL_LOGINRESTRICTIONS
+
+/* Define to 1 if you have the declaration of `loginsuccess', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINSUCCESS
+
+/* Define to 1 if you have the declaration of `MAXSYMLINKS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_MAXSYMLINKS
+
+/* Define to 1 if you have the declaration of `memmem', and to 0 if you don't.
+   */
+#undef HAVE_DECL_MEMMEM
+
+/* Define to 1 if you have the declaration of `NFDBITS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_NFDBITS
+
+/* Define to 1 if you have the declaration of `offsetof', and to 0 if you
+   don't. */
+#undef HAVE_DECL_OFFSETOF
+
+/* Define to 1 if you have the declaration of `O_NONBLOCK', and to 0 if you
+   don't. */
+#undef HAVE_DECL_O_NONBLOCK
+
+/* Define to 1 if you have the declaration of `passwdexpired', and to 0 if you
+   don't. */
+#undef HAVE_DECL_PASSWDEXPIRED
+
+/* Define to 1 if you have the declaration of `readv', and to 0 if you don't.
+   */
+#undef HAVE_DECL_READV
+
+/* Define to 1 if you have the declaration of `setauthdb', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SETAUTHDB
+
+/* Define to 1 if you have the declaration of `SHUT_RD', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SHUT_RD
+
+/* Define to 1 if you have the declaration of `UINT32_MAX', and to 0 if you
+   don't. */
+#undef HAVE_DECL_UINT32_MAX
+
+/* Define to 1 if you have the declaration of `writev', and to 0 if you don't.
+   */
+#undef HAVE_DECL_WRITEV
+
+/* Define to 1 if you have the declaration of `_getlong', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETLONG
+
+/* Define to 1 if you have the declaration of `_getshort', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETSHORT
+
+/* Define to 1 if you have the declaration of `__builtin_inff', and to 0 if
+   you don't. */
+#undef HAVE_DECL___BUILTIN_INFF
+
+/* Define to 1 if you have the `DES_crypt' function. */
+#undef HAVE_DES_CRYPT
+
+/* Define if you have /dev/ptmx */
+#undef HAVE_DEV_PTMX
+
+/* Define if you have /dev/ptc */
+#undef HAVE_DEV_PTS_AND_PTC
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the `dirfd' function. */
+#undef HAVE_DIRFD
+
+/* Define to 1 if you have the `dirname' function. */
+#undef HAVE_DIRNAME
+
+/* Define to 1 if you have the `dlopen' function. */
+#undef HAVE_DLOPEN
+
+/* Define to 1 if you have the `EC_KEY_METHOD_new' function. */
+#undef HAVE_EC_KEY_METHOD_NEW
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates' function. */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates' function. */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the <elf.h> header file. */
+#undef HAVE_ELF_H
+
+/* Define to 1 if you have the `endgrent' function. */
+#undef HAVE_ENDGRENT
+
+/* Define to 1 if you have the <endian.h> header file. */
+#undef HAVE_ENDIAN_H
+
+/* Define to 1 if you have the `endutent' function. */
+#undef HAVE_ENDUTENT
+
+/* Define to 1 if you have the `endutxent' function. */
+#undef HAVE_ENDUTXENT
+
+/* Define to 1 if you have the `err' function. */
+#undef HAVE_ERR
+
+/* Define to 1 if you have the `errx' function. */
+#undef HAVE_ERRX
+
+/* Define to 1 if you have the <err.h> header file. */
+#undef HAVE_ERR_H
+
+/* Define if your system has /etc/default/login */
+#undef HAVE_ETC_DEFAULT_LOGIN
+
+/* Define to 1 if you have the `EVP_chacha20' function. */
+#undef HAVE_EVP_CHACHA20
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_updated_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_UPDATED_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv_noconst' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV_NOCONST
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_set_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_SET_IV
+
+/* Define to 1 if you have the `EVP_DigestFinal_ex' function. */
+#undef HAVE_EVP_DIGESTFINAL_EX
+
+/* Define to 1 if you have the `EVP_DigestInit_ex' function. */
+#undef HAVE_EVP_DIGESTINIT_EX
+
+/* Define to 1 if you have the `EVP_DigestSign' function. */
+#undef HAVE_EVP_DIGESTSIGN
+
+/* Define to 1 if you have the `EVP_DigestVerify' function. */
+#undef HAVE_EVP_DIGESTVERIFY
+
+/* Define to 1 if you have the `EVP_MD_CTX_cleanup' function. */
+#undef HAVE_EVP_MD_CTX_CLEANUP
+
+/* Define to 1 if you have the `EVP_MD_CTX_copy_ex' function. */
+#undef HAVE_EVP_MD_CTX_COPY_EX
+
+/* Define to 1 if you have the `EVP_MD_CTX_init' function. */
+#undef HAVE_EVP_MD_CTX_INIT
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_private_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PRIVATE_KEY
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_public_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PUBLIC_KEY
+
+/* Define to 1 if you have the `EVP_sha256' function. */
+#undef HAVE_EVP_SHA256
+
+/* Define to 1 if you have the `EVP_sha384' function. */
+#undef HAVE_EVP_SHA384
+
+/* Define to 1 if you have the `EVP_sha512' function. */
+#undef HAVE_EVP_SHA512
+
+/* Define if you have ut_exit in utmp.h */
+#undef HAVE_EXIT_IN_UTMP
+
+/* Define to 1 if you have the `explicit_bzero' function. */
+#undef HAVE_EXPLICIT_BZERO
+
+/* Define to 1 if you have the `explicit_memset' function. */
+#undef HAVE_EXPLICIT_MEMSET
+
+/* Define to 1 if you have the `fchmod' function. */
+#undef HAVE_FCHMOD
+
+/* Define to 1 if you have the `fchmodat' function. */
+#undef HAVE_FCHMODAT
+
+/* Define to 1 if you have the `fchown' function. */
+#undef HAVE_FCHOWN
+
+/* Define to 1 if you have the `fchownat' function. */
+#undef HAVE_FCHOWNAT
+
+/* Use F_CLOSEM fcntl for closefrom */
+#undef HAVE_FCNTL_CLOSEM
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if the system has the type `fd_mask'. */
+#undef HAVE_FD_MASK
+
+/* Define to 1 if you have the <features.h> header file. */
+#undef HAVE_FEATURES_H
+
+/* Define to 1 if you have the `fido_assert_set_clientdata' function. */
+#undef HAVE_FIDO_ASSERT_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_prot' function. */
+#undef HAVE_FIDO_CRED_PROT
+
+/* Define to 1 if you have the `fido_cred_set_clientdata' function. */
+#undef HAVE_FIDO_CRED_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_set_prot' function. */
+#undef HAVE_FIDO_CRED_SET_PROT
+
+/* Define to 1 if you have the `fido_dev_get_touch_begin' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_BEGIN
+
+/* Define to 1 if you have the `fido_dev_get_touch_status' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_STATUS
+
+/* Define to 1 if you have the `fido_dev_is_winhello' function. */
+#undef HAVE_FIDO_DEV_IS_WINHELLO
+
+/* Define to 1 if you have the `fido_dev_supports_cred_prot' function. */
+#undef HAVE_FIDO_DEV_SUPPORTS_CRED_PROT
+
+/* Define to 1 if you have the <floatingpoint.h> header file. */
+#undef HAVE_FLOATINGPOINT_H
+
+/* Define to 1 if you have the `flock' function. */
+#undef HAVE_FLOCK
+
+/* Define to 1 if you have the `fmt_scaled' function. */
+#undef HAVE_FMT_SCALED
+
+/* Define to 1 if you have the `fnmatch' function. */
+#undef HAVE_FNMATCH
+
+/* Define to 1 if you have the <fnmatch.h> header file. */
+#undef HAVE_FNMATCH_H
+
+/* Define to 1 if you have the `freeaddrinfo' function. */
+#undef HAVE_FREEADDRINFO
+
+/* Define to 1 if you have the `freezero' function. */
+#undef HAVE_FREEZERO
+
+/* Define to 1 if the system has the type `fsblkcnt_t'. */
+#undef HAVE_FSBLKCNT_T
+
+/* Define to 1 if the system has the type `fsfilcnt_t'. */
+#undef HAVE_FSFILCNT_T
+
+/* Define to 1 if you have the `fstatat' function. */
+#undef HAVE_FSTATAT
+
+/* Define to 1 if you have the `fstatfs' function. */
+#undef HAVE_FSTATFS
+
+/* Define to 1 if you have the `fstatvfs' function. */
+#undef HAVE_FSTATVFS
+
+/* Define to 1 if you have the `futimes' function. */
+#undef HAVE_FUTIMES
+
+/* Define to 1 if you have the `gai_strerror' function. */
+#undef HAVE_GAI_STRERROR
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+#undef HAVE_GETADDRINFO
+
+/* Define to 1 if you have the `getaudit' function. */
+#undef HAVE_GETAUDIT
+
+/* Define to 1 if you have the `getaudit_addr' function. */
+#undef HAVE_GETAUDIT_ADDR
+
+/* Define to 1 if you have the `getcwd' function. */
+#undef HAVE_GETCWD
+
+/* Define to 1 if you have the `getentropy' function. */
+#undef HAVE_GETENTROPY
+
+/* Define to 1 if you have the `getgrouplist' function. */
+#undef HAVE_GETGROUPLIST
+
+/* Define to 1 if you have the `getgrset' function. */
+#undef HAVE_GETGRSET
+
+/* Define to 1 if you have the `getlastlogxbyname' function. */
+#undef HAVE_GETLASTLOGXBYNAME
+
+/* Define to 1 if you have the `getline' function. */
+#undef HAVE_GETLINE
+
+/* Define to 1 if you have the `getluid' function. */
+#undef HAVE_GETLUID
+
+/* Define to 1 if you have the `getnameinfo' function. */
+#undef HAVE_GETNAMEINFO
+
+/* Define to 1 if you have the `getopt' function. */
+#undef HAVE_GETOPT
+
+/* Define to 1 if you have the <getopt.h> header file. */
+#undef HAVE_GETOPT_H
+
+/* Define if your getopt(3) defines and uses optreset */
+#undef HAVE_GETOPT_OPTRESET
+
+/* Define if your libraries define getpagesize() */
+#undef HAVE_GETPAGESIZE
+
+/* Define to 1 if you have the `getpeereid' function. */
+#undef HAVE_GETPEEREID
+
+/* Define to 1 if you have the `getpeerucred' function. */
+#undef HAVE_GETPEERUCRED
+
+/* Define to 1 if you have the `getpgid' function. */
+#undef HAVE_GETPGID
+
+/* Define to 1 if you have the `getpgrp' function. */
+#undef HAVE_GETPGRP
+
+/* Define to 1 if you have the `getpwanam' function. */
+#undef HAVE_GETPWANAM
+
+/* Define to 1 if you have the `getrandom' function. */
+#undef HAVE_GETRANDOM
+
+/* Define to 1 if you have the `getrlimit' function. */
+#undef HAVE_GETRLIMIT
+
+/* Define if getrrsetbyname() exists */
+#undef HAVE_GETRRSETBYNAME
+
+/* Define to 1 if you have the `getseuserbyname' function. */
+#undef HAVE_GETSEUSERBYNAME
+
+/* Define to 1 if you have the `getsid' function. */
+#undef HAVE_GETSID
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define to 1 if you have the `getttyent' function. */
+#undef HAVE_GETTTYENT
+
+/* Define to 1 if you have the `getutent' function. */
+#undef HAVE_GETUTENT
+
+/* Define to 1 if you have the `getutid' function. */
+#undef HAVE_GETUTID
+
+/* Define to 1 if you have the `getutline' function. */
+#undef HAVE_GETUTLINE
+
+/* Define to 1 if you have the `getutxent' function. */
+#undef HAVE_GETUTXENT
+
+/* Define to 1 if you have the `getutxid' function. */
+#undef HAVE_GETUTXID
+
+/* Define to 1 if you have the `getutxline' function. */
+#undef HAVE_GETUTXLINE
+
+/* Define to 1 if you have the `getutxuser' function. */
+#undef HAVE_GETUTXUSER
+
+/* Define to 1 if you have the `get_default_context_with_level' function. */
+#undef HAVE_GET_DEFAULT_CONTEXT_WITH_LEVEL
+
+/* Define to 1 if you have the `glob' function. */
+#undef HAVE_GLOB
+
+/* Define to 1 if you have the <glob.h> header file. */
+#undef HAVE_GLOB_H
+
+/* Define to 1 if you have the `group_from_gid' function. */
+#undef HAVE_GROUP_FROM_GID
+
+/* Define to 1 if you have the <gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi/gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_KRB5_H
+
+/* Define to 1 if you have the <gssapi.h> header file. */
+#undef HAVE_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_KRB5_H
+
+/* Define if HEADER.ad exists in arpa/nameser.h */
+#undef HAVE_HEADER_AD
+
+/* Define to 1 if you have the `HMAC_CTX_init' function. */
+#undef HAVE_HMAC_CTX_INIT
+
+/* Define if you have ut_host in utmp.h */
+#undef HAVE_HOST_IN_UTMP
+
+/* Define if you have ut_host in utmpx.h */
+#undef HAVE_HOST_IN_UTMPX
+
+/* Define to 1 if you have the <iaf.h> header file. */
+#undef HAVE_IAF_H
+
+/* Define to 1 if you have the <ia.h> header file. */
+#undef HAVE_IA_H
+
+/* Define if you have ut_id in utmp.h */
+#undef HAVE_ID_IN_UTMP
+
+/* Define if you have ut_id in utmpx.h */
+#undef HAVE_ID_IN_UTMPX
+
+/* Define to 1 if you have the <ifaddrs.h> header file. */
+#undef HAVE_IFADDRS_H
+
+/* Define to 1 if you have the `inet_aton' function. */
+#undef HAVE_INET_ATON
+
+/* Define to 1 if you have the `inet_ntoa' function. */
+#undef HAVE_INET_NTOA
+
+/* Define to 1 if you have the `inet_ntop' function. */
+#undef HAVE_INET_NTOP
+
+/* Define to 1 if you have the `innetgr' function. */
+#undef HAVE_INNETGR
+
+/* define if you have int64_t data type */
+#undef HAVE_INT64_T
+
+/* Define to 1 if the system has the type `intmax_t'. */
+#undef HAVE_INTMAX_T
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* define if you have intxx_t data type */
+#undef HAVE_INTXX_T
+
+/* Define to 1 if the system has the type `in_addr_t'. */
+#undef HAVE_IN_ADDR_T
+
+/* Define to 1 if the system has the type `in_port_t'. */
+#undef HAVE_IN_PORT_T
+
+/* Define if you have isblank(3C). */
+#undef HAVE_ISBLANK
+
+/* Define to 1 if you have the `killpg' function. */
+#undef HAVE_KILLPG
+
+/* Define to 1 if you have the `krb5_cc_new_unique' function. */
+#undef HAVE_KRB5_CC_NEW_UNIQUE
+
+/* Define to 1 if you have the `krb5_free_error_message' function. */
+#undef HAVE_KRB5_FREE_ERROR_MESSAGE
+
+/* Define to 1 if you have the `krb5_get_error_message' function. */
+#undef HAVE_KRB5_GET_ERROR_MESSAGE
+
+/* Define to 1 if you have the <langinfo.h> header file. */
+#undef HAVE_LANGINFO_H
+
+/* Define to 1 if you have the <lastlog.h> header file. */
+#undef HAVE_LASTLOG_H
+
+/* Define if you want ldns support */
+#undef HAVE_LDNS
+
+/* Define to 1 if you have the <libaudit.h> header file. */
+#undef HAVE_LIBAUDIT_H
+
+/* Define to 1 if you have the `bsm' library (-lbsm). */
+#undef HAVE_LIBBSM
+
+/* Define to 1 if you have the `dl' library (-ldl). */
+#undef HAVE_LIBDL
+
+/* Define to 1 if you have the <libgen.h> header file. */
+#undef HAVE_LIBGEN_H
+
+/* Define if system has libiaf that supports set_id */
+#undef HAVE_LIBIAF
+
+/* Define to 1 if you have the `network' library (-lnetwork). */
+#undef HAVE_LIBNETWORK
+
+/* Define to 1 if you have the `pam' library (-lpam). */
+#undef HAVE_LIBPAM
+
+/* Define to 1 if you have the <libproc.h> header file. */
+#undef HAVE_LIBPROC_H
+
+/* Define to 1 if you have the `socket' library (-lsocket). */
+#undef HAVE_LIBSOCKET
+
+/* Define to 1 if you have the <libutil.h> header file. */
+#undef HAVE_LIBUTIL_H
+
+/* Define to 1 if you have the `xnet' library (-lxnet). */
+#undef HAVE_LIBXNET
+
+/* Define to 1 if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <linux/audit.h> header file. */
+#undef HAVE_LINUX_AUDIT_H
+
+/* Define to 1 if you have the <linux/filter.h> header file. */
+#undef HAVE_LINUX_FILTER_H
+
+/* Define to 1 if you have the <linux/if_tun.h> header file. */
+#undef HAVE_LINUX_IF_TUN_H
+
+/* Define to 1 if you have the <linux/seccomp.h> header file. */
+#undef HAVE_LINUX_SECCOMP_H
+
+/* Define to 1 if you have the `llabs' function. */
+#undef HAVE_LLABS
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the `localtime_r' function. */
+#undef HAVE_LOCALTIME_R
+
+/* Define to 1 if you have the `login' function. */
+#undef HAVE_LOGIN
+
+/* Define to 1 if you have the <login_cap.h> header file. */
+#undef HAVE_LOGIN_CAP_H
+
+/* Define to 1 if you have the `login_getcapbool' function. */
+#undef HAVE_LOGIN_GETCAPBOOL
+
+/* Define to 1 if you have the `login_getpwclass' function. */
+#undef HAVE_LOGIN_GETPWCLASS
+
+/* Define to 1 if you have the <login.h> header file. */
+#undef HAVE_LOGIN_H
+
+/* Define to 1 if you have the `logout' function. */
+#undef HAVE_LOGOUT
+
+/* Define to 1 if you have the `logwtmp' function. */
+#undef HAVE_LOGWTMP
+
+/* Define to 1 if the system has the type `long double'. */
+#undef HAVE_LONG_DOUBLE
+
+/* Define to 1 if the system has the type `long long'. */
+#undef HAVE_LONG_LONG
+
+/* Define to 1 if you have the <maillock.h> header file. */
+#undef HAVE_MAILLOCK_H
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+   to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the `mblen' function. */
+#undef HAVE_MBLEN
+
+/* Define to 1 if you have the `mbtowc' function. */
+#undef HAVE_MBTOWC
+
+/* Define to 1 if you have the `memmem' function. */
+#undef HAVE_MEMMEM
+
+/* Define to 1 if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define to 1 if you have the `memset_s' function. */
+#undef HAVE_MEMSET_S
+
+/* Define to 1 if you have the `mkdtemp' function. */
+#undef HAVE_MKDTEMP
+
+/* Define to 1 if you have the `mmap' function. */
+#undef HAVE_MMAP
+
+/* define if you have mode_t data type */
+#undef HAVE_MODE_T
+
+/* Some systems put nanosleep outside of libc */
+#undef HAVE_NANOSLEEP
+
+/* Define to 1 if you have the <ndir.h> header file. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the <netdb.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define to 1 if you have the <netgroup.h> header file. */
+#undef HAVE_NETGROUP_H
+
+/* Define to 1 if you have the <net/if_tun.h> header file. */
+#undef HAVE_NET_IF_TUN_H
+
+/* Define to 1 if you have the <net/route.h> header file. */
+#undef HAVE_NET_ROUTE_H
+
+/* Define if you are on NeXT */
+#undef HAVE_NEXT
+
+/* Define to 1 if the system has the type `nfds_t'. */
+#undef HAVE_NFDS_T
+
+/* Define to 1 if you have the `ngetaddrinfo' function. */
+#undef HAVE_NGETADDRINFO
+
+/* Define to 1 if you have the `nlist' function. */
+#undef HAVE_NLIST
+
+/* Define to 1 if you have the <nlist.h> header file. */
+#undef HAVE_NLIST_H
+
+/* Define to 1 if you have the `nl_langinfo' function. */
+#undef HAVE_NL_LANGINFO
+
+/* Define to 1 if you have the `nsleep' function. */
+#undef HAVE_NSLEEP
+
+/* Define to 1 if you have the `ogetaddrinfo' function. */
+#undef HAVE_OGETADDRINFO
+
+/* Define if you have an old version of PAM which takes only one argument to
+   pam_strerror */
+#undef HAVE_OLD_PAM
+
+/* Define to 1 if you have the `openlog_r' function. */
+#undef HAVE_OPENLOG_R
+
+/* Define to 1 if you have the `openpty' function. */
+#undef HAVE_OPENPTY
+
+/* Define to 1 if you have the `OpenSSL_version' function. */
+#undef HAVE_OPENSSL_VERSION
+
+/* Define to 1 if you have the `OpenSSL_version_num' function. */
+#undef HAVE_OPENSSL_VERSION_NUM
+
+/* Define if you have Digital Unix Security Integration Architecture */
+#undef HAVE_OSF_SIA
+
+/* Define to 1 if you have the `pam_getenvlist' function. */
+#undef HAVE_PAM_GETENVLIST
+
+/* Define to 1 if you have the <pam/pam_appl.h> header file. */
+#undef HAVE_PAM_PAM_APPL_H
+
+/* Define to 1 if you have the `pam_putenv' function. */
+#undef HAVE_PAM_PUTENV
+
+/* Define to 1 if you have the <paths.h> header file. */
+#undef HAVE_PATHS_H
+
+/* Define if you have ut_pid in utmp.h */
+#undef HAVE_PID_IN_UTMP
+
+/* define if you have pid_t data type */
+#undef HAVE_PID_T
+
+/* Define to 1 if you have the `pledge' function. */
+#undef HAVE_PLEDGE
+
+/* Define to 1 if you have the `poll' function. */
+#undef HAVE_POLL
+
+/* Define to 1 if you have the <poll.h> header file. */
+#undef HAVE_POLL_H
+
+/* Define to 1 if you have the `ppoll' function. */
+#undef HAVE_PPOLL
+
+/* Define to 1 if you have the `prctl' function. */
+#undef HAVE_PRCTL
+
+/* Define to 1 if you have the `priv_basicset' function. */
+#undef HAVE_PRIV_BASICSET
+
+/* Define to 1 if you have the <priv.h> header file. */
+#undef HAVE_PRIV_H
+
+/* Define to 1 if you have the `procctl' function. */
+#undef HAVE_PROCCTL
+
+/* Define if you have /proc/$pid/fd */
+#undef HAVE_PROC_PID
+
+/* Define to 1 if you have the `proc_pidinfo' function. */
+#undef HAVE_PROC_PIDINFO
+
+/* Define to 1 if you have the `pselect' function. */
+#undef HAVE_PSELECT
+
+/* Define to 1 if you have the `pstat' function. */
+#undef HAVE_PSTAT
+
+/* Define to 1 if you have the <pty.h> header file. */
+#undef HAVE_PTY_H
+
+/* Define to 1 if you have the `pututline' function. */
+#undef HAVE_PUTUTLINE
+
+/* Define to 1 if you have the `pututxline' function. */
+#undef HAVE_PUTUTXLINE
+
+/* Define to 1 if you have the `raise' function. */
+#undef HAVE_RAISE
+
+/* Define to 1 if you have the `readpassphrase' function. */
+#undef HAVE_READPASSPHRASE
+
+/* Define to 1 if you have the <readpassphrase.h> header file. */
+#undef HAVE_READPASSPHRASE_H
+
+/* Define to 1 if your system has a GNU libc compatible `realloc' function,
+   and to 0 otherwise. */
+#undef HAVE_REALLOC
+
+/* Define to 1 if you have the `reallocarray' function. */
+#undef HAVE_REALLOCARRAY
+
+/* Define to 1 if you have the `realpath' function. */
+#undef HAVE_REALPATH
+
+/* Define to 1 if you have the `recallocarray' function. */
+#undef HAVE_RECALLOCARRAY
+
+/* Define to 1 if you have the `recvmsg' function. */
+#undef HAVE_RECVMSG
+
+/* sys/resource.h has RLIMIT_NPROC */
+#undef HAVE_RLIMIT_NPROC
+
+/* Define to 1 if you have the <rpc/types.h> header file. */
+#undef HAVE_RPC_TYPES_H
+
+/* Define to 1 if you have the `rresvport_af' function. */
+#undef HAVE_RRESVPORT_AF
+
+/* Define to 1 if you have the `RSA_generate_key_ex' function. */
+#undef HAVE_RSA_GENERATE_KEY_EX
+
+/* Define to 1 if you have the `RSA_get_default_method' function. */
+#undef HAVE_RSA_GET_DEFAULT_METHOD
+
+/* Define to 1 if you have the <sandbox.h> header file. */
+#undef HAVE_SANDBOX_H
+
+/* Define to 1 if you have the `sandbox_init' function. */
+#undef HAVE_SANDBOX_INIT
+
+/* define if you have sa_family_t data type */
+#undef HAVE_SA_FAMILY_T
+
+/* Define to 1 if you have the `scan_scaled' function. */
+#undef HAVE_SCAN_SCALED
+
+/* Define if you have SecureWare-based protected password database */
+#undef HAVE_SECUREWARE
+
+/* Define to 1 if you have the <security/pam_appl.h> header file. */
+#undef HAVE_SECURITY_PAM_APPL_H
+
+/* Define to 1 if you have the `sendmsg' function. */
+#undef HAVE_SENDMSG
+
+/* Define to 1 if you have the `setauthdb' function. */
+#undef HAVE_SETAUTHDB
+
+/* Define to 1 if you have the `setdtablesize' function. */
+#undef HAVE_SETDTABLESIZE
+
+/* Define to 1 if you have the `setegid' function. */
+#undef HAVE_SETEGID
+
+/* Define to 1 if you have the `setenv' function. */
+#undef HAVE_SETENV
+
+/* Define to 1 if you have the `seteuid' function. */
+#undef HAVE_SETEUID
+
+/* Define to 1 if you have the `setgroupent' function. */
+#undef HAVE_SETGROUPENT
+
+/* Define to 1 if you have the `setgroups' function. */
+#undef HAVE_SETGROUPS
+
+/* Define to 1 if you have the `setlinebuf' function. */
+#undef HAVE_SETLINEBUF
+
+/* Define to 1 if you have the `setlogin' function. */
+#undef HAVE_SETLOGIN
+
+/* Define to 1 if you have the `setluid' function. */
+#undef HAVE_SETLUID
+
+/* Define to 1 if you have the `setpassent' function. */
+#undef HAVE_SETPASSENT
+
+/* Define to 1 if you have the `setpcred' function. */
+#undef HAVE_SETPCRED
+
+/* Define to 1 if you have the `setpflags' function. */
+#undef HAVE_SETPFLAGS
+
+/* Define to 1 if you have the `setppriv' function. */
+#undef HAVE_SETPPRIV
+
+/* Define to 1 if you have the `setproctitle' function. */
+#undef HAVE_SETPROCTITLE
+
+/* Define to 1 if you have the `setregid' function. */
+#undef HAVE_SETREGID
+
+/* Define to 1 if you have the `setresgid' function. */
+#undef HAVE_SETRESGID
+
+/* Define to 1 if you have the `setresuid' function. */
+#undef HAVE_SETRESUID
+
+/* Define to 1 if you have the `setreuid' function. */
+#undef HAVE_SETREUID
+
+/* Define to 1 if you have the `setrlimit' function. */
+#undef HAVE_SETRLIMIT
+
+/* Define to 1 if you have the `setsid' function. */
+#undef HAVE_SETSID
+
+/* Define to 1 if you have the `setutent' function. */
+#undef HAVE_SETUTENT
+
+/* Define to 1 if you have the `setutxdb' function. */
+#undef HAVE_SETUTXDB
+
+/* Define to 1 if you have the `setutxent' function. */
+#undef HAVE_SETUTXENT
+
+/* Define to 1 if you have the `setvbuf' function. */
+#undef HAVE_SETVBUF
+
+/* Define to 1 if you have the `set_id' function. */
+#undef HAVE_SET_ID
+
+/* Define to 1 if you have the `SHA256Update' function. */
+#undef HAVE_SHA256UPDATE
+
+/* Define to 1 if you have the <sha2.h> header file. */
+#undef HAVE_SHA2_H
+
+/* Define to 1 if you have the `SHA384Update' function. */
+#undef HAVE_SHA384UPDATE
+
+/* Define to 1 if you have the `SHA512Update' function. */
+#undef HAVE_SHA512UPDATE
+
+/* Define to 1 if you have the <shadow.h> header file. */
+#undef HAVE_SHADOW_H
+
+/* Define to 1 if you have the `sigaction' function. */
+#undef HAVE_SIGACTION
+
+/* Define to 1 if the system has the type `sighandler_t'. */
+#undef HAVE_SIGHANDLER_T
+
+/* Define to 1 if you have the `sigvec' function. */
+#undef HAVE_SIGVEC
+
+/* Define to 1 if the system has the type `sig_atomic_t'. */
+#undef HAVE_SIG_ATOMIC_T
+
+/* define if you have size_t data type */
+#undef HAVE_SIZE_T
+
+/* Define to 1 if you have the `snprintf' function. */
+#undef HAVE_SNPRINTF
+
+/* Define to 1 if you have the `socketpair' function. */
+#undef HAVE_SOCKETPAIR
+
+/* Have PEERCRED socket option */
+#undef HAVE_SO_PEERCRED
+
+/* define if you have ssize_t data type */
+#undef HAVE_SSIZE_T
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE_SS_FAMILY_IN_SS
+
+/* Define if you have ut_ss in utmpx.h */
+#undef HAVE_SS_IN_UTMPX
+
+/* Define to 1 if you have the `statfs' function. */
+#undef HAVE_STATFS
+
+/* Define to 1 if you have the `statvfs' function. */
+#undef HAVE_STATVFS
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#undef HAVE_STDIO_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasestr' function. */
+#undef HAVE_STRCASESTR
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the `strftime' function. */
+#undef HAVE_STRFTIME
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcat' function. */
+#undef HAVE_STRLCAT
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if you have the `strmode' function. */
+#undef HAVE_STRMODE
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
+/* Define to 1 if you have the `strnvis' function. */
+#undef HAVE_STRNVIS
+
+/* Define to 1 if you have the `strptime' function. */
+#undef HAVE_STRPTIME
+
+/* Define to 1 if you have the `strsep' function. */
+#undef HAVE_STRSEP
+
+/* Define to 1 if you have the `strsignal' function. */
+#undef HAVE_STRSIGNAL
+
+/* Define to 1 if you have the `strtoll' function. */
+#undef HAVE_STRTOLL
+
+/* Define to 1 if you have the `strtonum' function. */
+#undef HAVE_STRTONUM
+
+/* Define to 1 if you have the `strtoul' function. */
+#undef HAVE_STRTOUL
+
+/* Define to 1 if you have the `strtoull' function. */
+#undef HAVE_STRTOULL
+
+/* define if you have struct addrinfo data type */
+#undef HAVE_STRUCT_ADDRINFO
+
+/* Define to 1 if `d_type' is a member of `struct dirent'. */
+#undef HAVE_STRUCT_DIRENT_D_TYPE
+
+/* define if you have struct in6_addr data type */
+#undef HAVE_STRUCT_IN6_ADDR
+
+/* Define to 1 if `pw_change' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CHANGE
+
+/* Define to 1 if `pw_class' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CLASS
+
+/* Define to 1 if `pw_expire' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_EXPIRE
+
+/* Define to 1 if `pw_gecos' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_GECOS
+
+/* Define to 1 if `fd' is a member of `struct pollfd'. */
+#undef HAVE_STRUCT_POLLFD_FD
+
+/* define if you have struct sockaddr_in6 data type */
+#undef HAVE_STRUCT_SOCKADDR_IN6
+
+/* Define to 1 if `sin6_scope_id' is a member of `struct sockaddr_in6'. */
+#undef HAVE_STRUCT_SOCKADDR_IN6_SIN6_SCOPE_ID
+
+/* define if you have struct sockaddr_storage data type */
+#undef HAVE_STRUCT_SOCKADDR_STORAGE
+
+/* Define to 1 if `f_files' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FILES
+
+/* Define to 1 if `f_flags' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FLAGS
+
+/* Define to 1 if `st_blksize' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_BLKSIZE
+
+/* Define to 1 if `st_mtim' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIM
+
+/* Define to 1 if `st_mtime' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIME
+
+/* define if you have struct timespec */
+#undef HAVE_STRUCT_TIMESPEC
+
+/* define if you have struct timeval */
+#undef HAVE_STRUCT_TIMEVAL
+
+/* Define to 1 if you have the `sysconf' function. */
+#undef HAVE_SYSCONF
+
+/* Define if you have syslen in utmpx.h */
+#undef HAVE_SYSLEN_IN_UTMPX
+
+/* Define to 1 if you have the <sys/audit.h> header file. */
+#undef HAVE_SYS_AUDIT_H
+
+/* Define to 1 if you have the <sys/bitypes.h> header file. */
+#undef HAVE_SYS_BITYPES_H
+
+/* Define to 1 if you have the <sys/bsdtty.h> header file. */
+#undef HAVE_SYS_BSDTTY_H
+
+/* Define to 1 if you have the <sys/byteorder.h> header file. */
+#undef HAVE_SYS_BYTEORDER_H
+
+/* Define to 1 if you have the <sys/capsicum.h> header file. */
+#undef HAVE_SYS_CAPSICUM_H
+
+/* Define to 1 if you have the <sys/cdefs.h> header file. */
+#undef HAVE_SYS_CDEFS_H
+
+/* Define to 1 if you have the <sys/dir.h> header file. */
+#undef HAVE_SYS_DIR_H
+
+/* Define if your system defines sys_errlist[] */
+#undef HAVE_SYS_ERRLIST
+
+/* Define to 1 if you have the <sys/file.h> header file. */
+#undef HAVE_SYS_FILE_H
+
+/* Define to 1 if you have the <sys/label.h> header file. */
+#undef HAVE_SYS_LABEL_H
+
+/* Define to 1 if you have the <sys/mman.h> header file. */
+#undef HAVE_SYS_MMAN_H
+
+/* Define to 1 if you have the <sys/mount.h> header file. */
+#undef HAVE_SYS_MOUNT_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file. */
+#undef HAVE_SYS_NDIR_H
+
+/* Define if your system defines sys_nerr */
+#undef HAVE_SYS_NERR
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/poll.h> header file. */
+#undef HAVE_SYS_POLL_H
+
+/* Define to 1 if you have the <sys/prctl.h> header file. */
+#undef HAVE_SYS_PRCTL_H
+
+/* Define to 1 if you have the <sys/procctl.h> header file. */
+#undef HAVE_SYS_PROCCTL_H
+
+/* Define to 1 if you have the <sys/pstat.h> header file. */
+#undef HAVE_SYS_PSTAT_H
+
+/* Define to 1 if you have the <sys/ptms.h> header file. */
+#undef HAVE_SYS_PTMS_H
+
+/* Define to 1 if you have the <sys/ptrace.h> header file. */
+#undef HAVE_SYS_PTRACE_H
+
+/* Define to 1 if you have the <sys/random.h> header file. */
+#undef HAVE_SYS_RANDOM_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/statvfs.h> header file. */
+#undef HAVE_SYS_STATVFS_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/stream.h> header file. */
+#undef HAVE_SYS_STREAM_H
+
+/* Define to 1 if you have the <sys/stropts.h> header file. */
+#undef HAVE_SYS_STROPTS_H
+
+/* Define to 1 if you have the <sys/strtio.h> header file. */
+#undef HAVE_SYS_STRTIO_H
+
+/* Define to 1 if you have the <sys/sysctl.h> header file. */
+#undef HAVE_SYS_SYSCTL_H
+
+/* Force use of sys/syslog.h on Ultrix */
+#undef HAVE_SYS_SYSLOG_H
+
+/* Define to 1 if you have the <sys/sysmacros.h> header file. */
+#undef HAVE_SYS_SYSMACROS_H
+
+/* Define to 1 if you have the <sys/timers.h> header file. */
+#undef HAVE_SYS_TIMERS_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/un.h> header file. */
+#undef HAVE_SYS_UN_H
+
+/* Define to 1 if you have the <sys/vfs.h> header file. */
+#undef HAVE_SYS_VFS_H
+
+/* Define to 1 if you have the `tcgetpgrp' function. */
+#undef HAVE_TCGETPGRP
+
+/* Define to 1 if you have the `tcsendbreak' function. */
+#undef HAVE_TCSENDBREAK
+
+/* Define to 1 if you have the `time' function. */
+#undef HAVE_TIME
+
+/* Define to 1 if you have the `timegm' function. */
+#undef HAVE_TIMEGM
+
+/* Define to 1 if you have the <time.h> header file. */
+#undef HAVE_TIME_H
+
+/* Define if you have ut_time in utmp.h */
+#undef HAVE_TIME_IN_UTMP
+
+/* Define if you have ut_time in utmpx.h */
+#undef HAVE_TIME_IN_UTMPX
+
+/* Define to 1 if you have the `timingsafe_bcmp' function. */
+#undef HAVE_TIMINGSAFE_BCMP
+
+/* Define to 1 if you have the <tmpdir.h> header file. */
+#undef HAVE_TMPDIR_H
+
+/* Define to 1 if you have the `truncate' function. */
+#undef HAVE_TRUNCATE
+
+/* Define to 1 if you have the <ttyent.h> header file. */
+#undef HAVE_TTYENT_H
+
+/* Define if you have ut_tv in utmp.h */
+#undef HAVE_TV_IN_UTMP
+
+/* Define if you have ut_tv in utmpx.h */
+#undef HAVE_TV_IN_UTMPX
+
+/* Define if you have ut_type in utmp.h */
+#undef HAVE_TYPE_IN_UTMP
+
+/* Define if you have ut_type in utmpx.h */
+#undef HAVE_TYPE_IN_UTMPX
+
+/* Define to 1 if you have the <ucred.h> header file. */
+#undef HAVE_UCRED_H
+
+/* Define to 1 if the system has the type `uintmax_t'. */
+#undef HAVE_UINTMAX_T
+
+/* define if you have uintxx_t data type */
+#undef HAVE_UINTXX_T
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `unlinkat' function. */
+#undef HAVE_UNLINKAT
+
+/* Define to 1 if you have the `unsetenv' function. */
+#undef HAVE_UNSETENV
+
+/* Define to 1 if the system has the type `unsigned long long'. */
+#undef HAVE_UNSIGNED_LONG_LONG
+
+/* Define to 1 if you have the `unveil' function. */
+#undef HAVE_UNVEIL
+
+/* Define to 1 if you have the `updwtmp' function. */
+#undef HAVE_UPDWTMP
+
+/* Define to 1 if you have the `updwtmpx' function. */
+#undef HAVE_UPDWTMPX
+
+/* Define to 1 if you have the <usersec.h> header file. */
+#undef HAVE_USERSEC_H
+
+/* Define to 1 if you have the `user_from_uid' function. */
+#undef HAVE_USER_FROM_UID
+
+/* Define to 1 if you have the `usleep' function. */
+#undef HAVE_USLEEP
+
+/* Define to 1 if you have the <util.h> header file. */
+#undef HAVE_UTIL_H
+
+/* Define to 1 if you have the `utimensat' function. */
+#undef HAVE_UTIMENSAT
+
+/* Define to 1 if you have the `utimes' function. */
+#undef HAVE_UTIMES
+
+/* Define to 1 if you have the <utime.h> header file. */
+#undef HAVE_UTIME_H
+
+/* Define to 1 if you have the `utmpname' function. */
+#undef HAVE_UTMPNAME
+
+/* Define to 1 if you have the `utmpxname' function. */
+#undef HAVE_UTMPXNAME
+
+/* Define to 1 if you have the <utmpx.h> header file. */
+#undef HAVE_UTMPX_H
+
+/* Define to 1 if you have the <utmp.h> header file. */
+#undef HAVE_UTMP_H
+
+/* define if you have u_char data type */
+#undef HAVE_U_CHAR
+
+/* define if you have u_int data type */
+#undef HAVE_U_INT
+
+/* define if you have u_int64_t data type */
+#undef HAVE_U_INT64_T
+
+/* define if you have u_intxx_t data type */
+#undef HAVE_U_INTXX_T
+
+/* Define to 1 if you have the `vasprintf' function. */
+#undef HAVE_VASPRINTF
+
+/* Define if va_copy exists */
+#undef HAVE_VA_COPY
+
+/* Define to 1 if you have the <vis.h> header file. */
+#undef HAVE_VIS_H
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#undef HAVE_VSNPRINTF
+
+/* Define to 1 if you have the `waitpid' function. */
+#undef HAVE_WAITPID
+
+/* Define to 1 if you have the `warn' function. */
+#undef HAVE_WARN
+
+/* Define to 1 if you have the <wchar.h> header file. */
+#undef HAVE_WCHAR_H
+
+/* Define to 1 if you have the `wcwidth' function. */
+#undef HAVE_WCWIDTH
+
+/* Define to 1 if you have the `_getlong' function. */
+#undef HAVE__GETLONG
+
+/* Define to 1 if you have the `_getpty' function. */
+#undef HAVE__GETPTY
+
+/* Define to 1 if you have the `_getshort' function. */
+#undef HAVE__GETSHORT
+
+/* Define if you have struct __res_state _res as an extern */
+#undef HAVE__RES_EXTERN
+
+/* Define to 1 if you have the `__b64_ntop' function. */
+#undef HAVE___B64_NTOP
+
+/* Define to 1 if you have the `__b64_pton' function. */
+#undef HAVE___B64_PTON
+
+/* Define if compiler implements __FUNCTION__ */
+#undef HAVE___FUNCTION__
+
+/* Define if libc defines __progname */
+#undef HAVE___PROGNAME
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE___SS_FAMILY_IN_SS
+
+/* Define if __va_copy exists */
+#undef HAVE___VA_COPY
+
+/* Define if compiler implements __func__ */
+#undef HAVE___func__
+
+/* Define this if you are using the Heimdal version of Kerberos V5 */
+#undef HEIMDAL
+
+/* Define if you need to use IP address instead of hostname in $DISPLAY */
+#undef IPADDR_IN_DISPLAY
+
+/* Detect IPv4 in IPv6 mapped addresses and treat as IPv4 */
+#undef IPV4_IN_IPV6
+
+/* Define if your system choked on IP TOS setting */
+#undef IP_TOS_IS_BROKEN
+
+/* Define if you want Kerberos 5 support */
+#undef KRB5
+
+/* Define if pututxline updates lastlog too */
+#undef LASTLOG_WRITE_PUTUTXLINE
+
+/* Define to whatever link() returns for "not supported" if it doesn't return
+   EOPNOTSUPP. */
+#undef LINK_OPNOTSUPP_ERRNO
+
+/* Lock all memory to protect sshd against Linux kcompactd */
+#undef LINUX_MEMLOCK_ONFAULT
+
+/* Adjust Linux out-of-memory killer */
+#undef LINUX_OOM_ADJUST
+
+/* max value of long long calculated by configure */
+#undef LLONG_MAX
+
+/* min value of long long calculated by configure */
+#undef LLONG_MIN
+
+/* Account locked with pw(1) */
+#undef LOCKED_PASSWD_PREFIX
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_STRING
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_SUBSTR
+
+/* Some systems need a utmpx entry for /bin/login to work */
+#undef LOGIN_NEEDS_UTMPX
+
+/* Set this to your mail directory if you do not have _PATH_MAILDIR */
+#undef MAIL_DIRECTORY
+
+/* Define if your compiler lacks __builtin_popcount */
+#undef MISSING_BUILTIN_POPCOUNT
+
+/* Need setpgrp to for controlling tty */
+#undef NEED_SETPGRP
+
+/* compiler does not accept __attribute__ on prototype args */
+#undef NO_ATTRIBUTE_ON_PROTOTYPE_ARGS
+
+/* compiler does not accept __attribute__ on return types */
+#undef NO_ATTRIBUTE_ON_RETURN_TYPE
+
+/* SA_RESTARTed signals do no interrupt select */
+#undef NO_SA_RESTART
+
+/* Define to disable UID restoration test */
+#undef NO_UID_RESTORATION_TEST
+
+/* Define if X11 doesn't support AF_UNIX sockets on that system */
+#undef NO_X11_UNIX_SOCKETS
+
+/* Define if EVP_DigestUpdate returns void */
+#undef OPENSSL_EVP_DIGESTUPDATE_VOID
+
+/* OpenSSL has ECC */
+#undef OPENSSL_HAS_ECC
+
+/* libcrypto has ed25519 support */
+#undef OPENSSL_HAS_ED25519
+
+/* libcrypto has NID_X9_62_prime256v1 */
+#undef OPENSSL_HAS_NISTP256
+
+/* libcrypto has NID_secp384r1 */
+#undef OPENSSL_HAS_NISTP384
+
+/* libcrypto has NID_secp521r1 */
+#undef OPENSSL_HAS_NISTP521
+
+/* libcrypto is missing AES 192 and 256 bit functions */
+#undef OPENSSL_LOBOTOMISED_AES
+
+/* Define if you want the OpenSSL internally seeded PRNG only */
+#undef OPENSSL_PRNG_ONLY
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define if you are using Solaris-derived PAM which passes pam_messages to
+   the conversation function with an extra level of indirection */
+#undef PAM_SUN_CODEBASE
+
+/* Work around problematic Linux PAM modules handling of PAM_TTY */
+#undef PAM_TTY_KLUDGE
+
+/* must supply username to passwd */
+#undef PASSWD_NEEDS_USERNAME
+
+/* System dirs owned by bin (uid 2) */
+#undef PLATFORM_SYS_DIR_UID
+
+/* need inet in pledge for setsockopt IP_TOS */
+#undef PLEDGE_EXTRA_INET
+
+/* Define if poll 2nd arg is ulong */
+#undef POLL_NFDS_T_ULONG
+
+/* Port number of PRNGD/EGD random number socket */
+#undef PRNGD_PORT
+
+/* Location of PRNGD/EGD random number socket */
+#undef PRNGD_SOCKET
+
+/* read(1) can return 0 for a non-closed fd */
+#undef PTY_ZEROREAD
+
+/* Sandbox using capsicum */
+#undef SANDBOX_CAPSICUM
+
+/* Sandbox using Darwin sandbox_init(3) */
+#undef SANDBOX_DARWIN
+
+/* no privsep sandboxing */
+#undef SANDBOX_NULL
+
+/* Sandbox using setrlimit(2) */
+#undef SANDBOX_RLIMIT
+
+/* Sandbox using seccomp filter */
+#undef SANDBOX_SECCOMP_FILTER
+
+/* setrlimit RLIMIT_FSIZE works */
+#undef SANDBOX_SKIP_RLIMIT_FSIZE
+
+/* define if setrlimit RLIMIT_NOFILE breaks things */
+#undef SANDBOX_SKIP_RLIMIT_NOFILE
+
+/* Sandbox using Solaris/Illumos privileges */
+#undef SANDBOX_SOLARIS
+
+/* Specify the system call convention in use */
+#undef SECCOMP_AUDIT_ARCH
+
+/* Define if your platform breaks doing a seteuid before a setuid */
+#undef SETEUID_BREAKS_SETUID
+
+/* The size of `int', as computed by sizeof. */
+#undef SIZEOF_INT
+
+/* The size of `long int', as computed by sizeof. */
+#undef SIZEOF_LONG_INT
+
+/* The size of `long long int', as computed by sizeof. */
+#undef SIZEOF_LONG_LONG_INT
+
+/* The size of `short int', as computed by sizeof. */
+#undef SIZEOF_SHORT_INT
+
+/* The size of `time_t', as computed by sizeof. */
+#undef SIZEOF_TIME_T
+
+/* Define as const if snprintf() can declare const char *fmt */
+#undef SNPRINTF_CONST
+
+/* sockaddr_in has sin_len */
+#undef SOCK_HAS_LEN
+
+/* Define to a Set Process Title type if your system is supported by
+   bsd-setproctitle.c */
+#undef SPT_TYPE
+
+/* Define if sshd somehow reacquires a controlling TTY after setsid() */
+#undef SSHD_ACQUIRES_CTTY
+
+/* sshd PAM service name */
+#undef SSHD_PAM_SERVICE
+
+/* Use audit debugging module */
+#undef SSH_AUDIT_EVENTS
+
+/* Windows is sensitive to read buffer size */
+#undef SSH_IOBUFSZ
+
+/* non-privileged user for privilege separation */
+#undef SSH_PRIVSEP_USER
+
+/* Use tunnel device compatibility to OpenBSD */
+#undef SSH_TUN_COMPAT_AF
+
+/* Open tunnel devices the FreeBSD way */
+#undef SSH_TUN_FREEBSD
+
+/* Open tunnel devices the Linux tun/tap way */
+#undef SSH_TUN_LINUX
+
+/* No layer 2 tunnel support */
+#undef SSH_TUN_NO_L2
+
+/* Open tunnel devices the OpenBSD way */
+#undef SSH_TUN_OPENBSD
+
+/* Prepend the address family to IP tunnel traffic */
+#undef SSH_TUN_PREPEND_AF
+
+/* Define to 1 if all of the C90 standard headers exist (not just the ones
+   required in a freestanding environment). This macro is provided for
+   backward compatibility; new code need not use it. */
+#undef STDC_HEADERS
+
+/* Define if you want a different $PATH for the superuser */
+#undef SUPERUSER_PATH
+
+/* syslog_r function is safe to use in in a signal handler */
+#undef SYSLOG_R_SAFE_IN_SIGHAND
+
+/* Have sshd notify systemd on start/reload */
+#undef SYSTEMD_NOTIFY
+
+/* Support routing domains using Linux VRF */
+#undef SYS_RDOMAIN_LINUX
+
+/* Support passwords > 8 chars */
+#undef UNIXWARE_LONG_PASSWORDS
+
+/* Specify default $PATH */
+#undef USER_PATH
+
+/* Define this if you want to use libkafs' AFS support */
+#undef USE_AFS
+
+/* Use BSM audit module */
+#undef USE_BSM_AUDIT
+
+/* Use btmp to log bad logins */
+#undef USE_BTMP
+
+/* Use libedit for sftp */
+#undef USE_LIBEDIT
+
+/* Use Linux audit module */
+#undef USE_LINUX_AUDIT
+
+/* Enable OpenSSL engine support */
+#undef USE_OPENSSL_ENGINE
+
+/* Define if you want to enable PAM support */
+#undef USE_PAM
+
+/* Use PIPES instead of a socketpair() */
+#undef USE_PIPES
+
+/* Define if you have Solaris privileges */
+#undef USE_SOLARIS_PRIVS
+
+/* Define if you have Solaris process contracts */
+#undef USE_SOLARIS_PROCESS_CONTRACTS
+
+/* Define if you have Solaris projects */
+#undef USE_SOLARIS_PROJECTS
+
+/* Use libwtmpdb for sshd */
+#undef USE_WTMPDB
+
+/* compiler variable declarations after code */
+#undef VARIABLE_DECLARATION_AFTER_CODE
+
+/* compiler supports variable length arrays */
+#undef VARIABLE_LENGTH_ARRAYS
+
+/* Define if you shouldn't strip 'tty' from your ttyname in [uw]tmp */
+#undef WITH_ABBREV_NO_TTY
+
+/* Define if you want to enable AIX4's authenticate function */
+#undef WITH_AIXAUTHENTICATE
+
+/* Define if you have/want arrays (cluster-wide session management, not C
+   arrays) */
+#undef WITH_IRIX_ARRAY
+
+/* Define if you want IRIX audit trails */
+#undef WITH_IRIX_AUDIT
+
+/* Define if you want IRIX kernel jobs */
+#undef WITH_IRIX_JOBS
+
+/* Define if you want IRIX project management */
+#undef WITH_IRIX_PROJECT
+
+/* use libcrypto for cryptography */
+#undef WITH_OPENSSL
+
+/* Define if you want SELinux support. */
+#undef WITH_SELINUX
+
+/* Enable zlib */
+#undef WITH_ZLIB
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+#  define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+#  undef WORDS_BIGENDIAN
+# endif
+#endif
+
+/* Define if xauth is found in your path */
+#undef XAUTH_PATH
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* log for bad login attempts */
+#undef _PATH_BTMP
+
+/* Full path of your "passwd" program */
+#undef _PATH_PASSWD_PROG
+
+/* Specify location of ssh.pid */
+#undef _PATH_SSH_PIDDIR
+
+/* Define if we don't have struct __res_state in resolv.h */
+#undef __res_state
+
+/* Define to rpl_calloc if the replacement function should be used. */
+#undef calloc
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
+
+/* Define to rpl_realloc if the replacement function should be used. */
+#undef realloc
+
+/* type to use in place of socklen_t if not defined */
+#undef socklen_t
--- a/configure~	1970-01-01 04:00:00.000000000 +0400
+++ b/configure~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,28438 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.71 for OpenSSH Portable.
+#
+# Report bugs to <openssh-unix-dev@mindrot.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
+# Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
+if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else $as_nop
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+
+# Reset variables that may have inherited troublesome values from
+# the environment.
+
+# IFS needs to be set, to space, tab, and newline, in precisely that order.
+# (If _AS_PATH_WALK were called with IFS unset, it would have the
+# side effect of setting IFS to empty, thus disabling word splitting.)
+# Quoting is to prevent editors from complaining about space-tab.
+as_nl='
+'
+export as_nl
+IFS=" ""	$as_nl"
+
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# Ensure predictable behavior from utilities with locale-dependent output.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# We cannot yet rely on "unset" to work, but we need these variables
+# to be unset--not just set to an empty or harmless value--now, to
+# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh).  This construct
+# also avoids known problems related to "unset" and subshell syntax
+# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
+for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
+do eval test \${$as_var+y} \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+
+# Ensure that fds 0, 1, and 2 are open.
+if (exec 3>&0) 2>/dev/null; then :; else exec 0</dev/null; fi
+if (exec 3>&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
+if (exec 3>&2)            ; then :; else exec 2>/dev/null; fi
+
+# The user is always right.
+if ${PATH_SEPARATOR+false} :; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    test -r "$as_dir$0" && as_myself=$as_dir$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="as_nop=:
+if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else \$as_nop
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" )
+then :
+
+else \$as_nop
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+blah=\$(echo \$(echo blah))
+test x\"\$blah\" = xblah || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null
+then :
+  as_have_required=yes
+else $as_nop
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null
+then :
+
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null
+then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+IFS=$as_save_IFS
+if $as_found
+then :
+
+else $as_nop
+  if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi
+fi
+
+
+      if test "x$CONFIG_SHELL" != x
+then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno
+then :
+  printf "%s\n" "$0: This script requires a shell more modern than all"
+  printf "%s\n" "$0: the shells that I found on your system."
+  if test ${ZSH_VERSION+y} ; then
+    printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and
+$0: openssh-unix-dev@mindrot.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
+then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else $as_nop
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
+then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else $as_nop
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  printf "%s\n" "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+# Determine whether it's possible to make 'echo' print without a newline.
+# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
+# for compatibility with existing Makefiles.
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+# For backward compatibility with old third-party macros, we provide
+# the shell variables $as_echo and $as_echo_n.  New code should use
+# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
+as_echo='printf %s\n'
+as_echo_n='printf %s'
+
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='OpenSSH'
+PACKAGE_TARNAME='openssh'
+PACKAGE_VERSION='Portable'
+PACKAGE_STRING='OpenSSH Portable'
+PACKAGE_BUGREPORT='openssh-unix-dev@mindrot.org'
+PACKAGE_URL=''
+
+ac_unique_file="ssh.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stddef.h>
+#ifdef HAVE_STDIO_H
+# include <stdio.h>
+#endif
+#ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+#ifdef HAVE_STRING_H
+# include <string.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_header_c_list=
+ac_subst_vars='LTLIBOBJS
+COMPATINCLUDES
+CFLAGS_NOPIE
+LDFLAGS_NOPIE
+TMUX
+DROPBEARCONVERT
+DROPBEARKEY
+DBCLIENT
+DROPBEAR
+CONCH
+PUTTYGEN
+PLINK
+DEPEND
+UNSUPPORTED_ALGORITHMS
+TEST_MALLOC_OPTIONS
+TEST_SSH_UTF8
+TEST_SSH_IPV6
+piddir
+user_path
+mansubdir
+MANTYPE
+XAUTH_PATH
+STRIP_OPT
+xauth_path
+PRIVSEP_PATH
+CHANNELLIBS
+K5LIBS
+GSSLIBS
+KRB5CONF
+SSHDLIBS
+SSH_PRIVSEP_USER
+SK_STANDALONE
+LIBFIDO2
+SK_DUMMY_LIBRARY
+OPENSSL_BIN
+openssl_bin
+PICFLAG
+LIBWTMPDB
+LIBEDIT
+LDNSCONFIG
+LIBOBJS
+TESTLIBS
+LD
+PATH_PASSWD_PROG
+STARTUP_SCRIPT_SHELL
+MAKE_PACKAGE_SUPPORTED
+PATH_USERADD_PROG
+PATH_GROUPADD_PROG
+MANFMT
+TEST_SHELL
+PKGCONFIG
+MANDOC
+NROFF
+GROFF
+SH
+TEST_MINUS_S_SH
+SED
+KILL
+CAT
+ac_ct_AR
+AR
+MKDIR_P
+EGREP
+GREP
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+RANLIB
+CPP
+AWK
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+runstatedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_largefile
+with_openssl
+with_stackprotect
+with_hardening
+with_retpoline
+with_rpath
+with_cflags
+with_cflags_after
+with_cppflags
+with_ldflags
+with_ldflags_after
+with_libs
+with_Werror
+with_linux_memlock_onfault
+with_solaris_contracts
+with_solaris_projects
+with_solaris_privs
+with_osfsia
+with_zlib
+with_zlib_version_check
+with_ldns
+with_libedit
+with_wtmpdb
+with_audit
+with_pie
+enable_pkcs11
+enable_security_key
+with_security_key_builtin
+with_security_key_standalone
+with_ssl_dir
+with_openssl_header_check
+with_ssl_engine
+with_prngd_port
+with_prngd_socket
+with_pam
+with_pam_service
+with_privsep_user
+with_sandbox
+with_selinux
+with_kerberos5
+with_privsep_path
+with_xauth
+enable_strip
+with_maildir
+with_mantype
+with_shadow
+with_ipaddr_display
+enable_etc_default_login
+with_default_path
+with_superuser_path
+with_4in6
+with_bsd_auth
+with_pid_dir
+enable_fd_passing
+enable_lastlog
+enable_utmp
+enable_utmpx
+enable_wtmp
+enable_wtmpx
+enable_libutil
+enable_pututline
+enable_pututxline
+with_lastlog
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir runstatedir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures OpenSSH Portable to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/openssh]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of OpenSSH Portable:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-largefile     omit support for large files
+  --disable-pkcs11        disable PKCS#11 support code [no]
+  --disable-security-key  disable U2F/FIDO support code no
+  --disable-strip         Disable calling strip(1) on install
+  --disable-etc-default-login Disable using PATH from /etc/default/login no
+  --disable-fd-passing    disable file descriptor passsing no
+  --disable-lastlog       disable use of lastlog even if detected no
+  --disable-utmp          disable use of utmp even if detected no
+  --disable-utmpx         disable use of utmpx even if detected no
+  --disable-wtmp          disable use of wtmp even if detected no
+  --disable-wtmpx         disable use of wtmpx even if detected no
+  --disable-libutil       disable use of libutil (login() etc.) no
+  --disable-pututline     disable use of pututline() etc. (uwtmp) no
+  --disable-pututxline    disable use of pututxline() etc. (uwtmpx) no
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --without-openssl       Disable use of OpenSSL; use only limited internal crypto **EXPERIMENTAL**
+  --without-stackprotect  Don't use compiler's stack protection
+  --without-hardening     Don't use toolchain hardening flags
+  --without-retpoline     Enable retpoline spectre mitigation
+  --without-rpath         Disable auto-added -R linker paths
+  --with-cflags           Specify additional flags to pass to compiler
+  --with-cflags-after     Specify additional flags to pass to compiler after configure
+  --with-cppflags         Specify additional flags to pass to preprocessor
+  --with-ldflags          Specify additional flags to pass to linker
+  --with-ldflags-after    Specify additional flags to pass to linker after configure
+  --with-libs             Specify additional libraries to link with
+  --with-Werror           Build main code with -Werror
+  --with-linux-memlock-onfault Enables memory locking on Linux
+  --with-solaris-contracts Enable Solaris process contracts (experimental)
+  --with-solaris-projects Enable Solaris projects (experimental)
+  --with-solaris-privs    Enable Solaris/Illumos privileges (experimental)
+  --with-osfsia           Enable Digital Unix SIA
+  --with-zlib=PATH        Use zlib in PATH
+  --without-zlib-version-check Disable zlib version check
+  --with-ldns[=PATH]      Use ldns for DNSSEC support (optionally in PATH)
+  --with-libedit[=PATH]   Enable libedit support for sftp
+  --with-wtmpdb[=PATH]   Enable wtmpdb support for sshd
+  --with-audit=module     Enable audit support (modules=debug,bsm,linux)
+  --with-pie              Build Position Independent Executables if possible
+  --with-security-key-builtin include builtin U2F/FIDO support
+  --with-security-key-standalone build standalone sk-libfido2 SecurityKeyProvider
+  --with-ssl-dir=PATH     Specify path to OpenSSL installation
+  --without-openssl-header-check Disable OpenSSL version consistency check
+  --with-ssl-engine       Enable OpenSSL (hardware) ENGINE support
+  --with-prngd-port=PORT  read entropy from PRNGD/EGD TCP localhost:PORT
+  --with-prngd-socket=FILE read entropy from PRNGD/EGD socket FILE (default=/var/run/egd-pool)
+  --with-pam              Enable PAM support
+  --with-pam-service=name Specify PAM service name
+  --with-privsep-user=user Specify non-privileged user for privilege separation
+  --with-sandbox=style    Specify privilege separation sandbox (no, capsicum, darwin, rlimit, seccomp_filter)
+  --with-selinux          Enable SELinux support
+  --with-kerberos5=PATH   Enable Kerberos 5 support
+  --with-privsep-path=xxx Path for privilege separation chroot (default=/var/empty)
+  --with-xauth=PATH       Specify path to xauth program
+  --with-maildir=/path/to/mail    Specify your system mail directory
+  --with-mantype=man|cat|doc  Set man page type
+  --without-shadow        Disable shadow password support
+  --with-ipaddr-display   Use ip address instead of hostname in $DISPLAY
+  --with-default-path=    Specify default $PATH environment for server
+  --with-superuser-path=  Specify different path for super-user
+  --with-4in6             Check for and convert IPv4 in IPv6 mapped addresses
+  --with-bsd-auth         Enable BSD auth support
+  --with-pid-dir=PATH     Specify location of sshd.pid file
+  --with-lastlog=FILE|DIR specify lastlog location common locations
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <openssh-unix-dev@mindrot.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for configure.gnu first; this name is used for a wrapper for
+    # Metaconfig's "Configure" on case-insensitive file systems.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+OpenSSH configure Portable
+generated by GNU Autoconf 2.71
+
+Copyright (C) 2021 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest.beam
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to run conftest.$ac_ext, and return whether this succeeded. Assumes that
+# executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: program exited with status $ac_status" >&5
+       printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as

[truncated 732905 bytes]

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

A previous Fixer patch attempt already exists for this issue. It was generated by Fixer `0.145.0`. Review that patch before changing code, improve it instead of starting blind, and clean up anything awkward or underexplained. In particular, remove avoidable `goto`, tighten the explanation of what the patch is doing, and make the resulting diff feel ready for upstream git review.
- Prior patch: `./prior-best.patch`
- Prior published session: `./prior-best-session.md`

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Review the first patch pass. The original pre-edit snapshot is available at `./source` for diffing.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`, `make` and, if available, `make check`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. The latest author response is at `./patch-output.txt`. Inspect the current code and changed paths like a strict code reviewer. Focus on correctness, regressions, maintainability, awkward control flow such as avoidable `goto`, missing validation, weak or non-gittable commit message text, and explanations that fail to connect the observed issue evidence to the code change. Also review the maintainer experience: the patch mail should be easy to accept upstream, the user-visible bug should be explained in plain language, subsystem-specific jargon should be defined when first used, and any non-obvious state translation or index remapping in code should have a short explanatory comment. Reject patches that omit `## Evidence Confidence`, use anything other than `reproduced`, `observed`, or `inferred`, or sound more certain than that evidence level allows. Reject patches that claim `reproduced` unless `## Validation` names the concrete reproduction command or test and its result. Reject patches that invent a reproducer, command line, crash, or user-visible failure not present in the evidence bundle; indirect profiler or strace evidence may justify a cautious mitigation, but the author must say it is indirect instead of presenting it as a confirmed upstream bug. Reject patches that introduce generic libc/std APIs when nearby code or project docs provide a local compat/helper API for the same job, unless the author explicitly justifies the exception. Reject validation that only reports a leaf object/syntax build when a project-level configure/build/test entrypoint exists and was not attempted; if a full build cannot run, the author must show the exact failed command and blocker.

Do not apply code changes in this pass.

Return a short markdown review report. The first non-empty line must be exactly one of:

RESULT: ok
RESULT: fix-needed

If you choose `RESULT: fix-needed`, add a `## Findings` section with concrete, actionable items.

Response

## Plan Pass

## Problem

Fixer observed `sshd-session: gis [priv]` in a runaway-process investigation, but the embedded evidence shows a sleeping process in `poll`/`restart_syscall`, `wchan=poll_schedule_timeout.constprop.0`, one strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot symbols are kernel memory-management paths, not a symbolized OpenSSH userspace loop.

## Evidence Confidence

inferred

## Proposed Subject

No source patch: require stronger sshd-session loop evidence

## Patch Plan

Do not edit source files. The evidence is indirect and does not establish an OpenSSH bug suitable for an upstream patch.

Replace/improve the prior Fixer attempt by keeping it artifact-free and rejecting the unrelated `buildpkg.sh` addition from `prior-best.patch`. Keep the result as a no-patch diagnosis unless stronger evidence is collected.

Docs/conventions checked: `README.md`, `README.privsep`, and `regress/README.regress`. Relevant local conventions/helpers include `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and OpenSSH’s poll/ppoll compatibility wrappers. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)` and in `server_loop2()` via `ppoll()` using `ptimeout_*`.

If later evidence proves a real busy loop, scope any patch to the confirmed loop in `monitor.c`, `serverloop.c`, or the relevant compat wrapper. Prefer bounded `continue`/`return` control flow matching nearby code; do not introduce avoidable `goto`.

## Risks

A speculative timeout or wakeup change could break valid idle SSH sessions or privilege-separation monitor behavior.

A source patch based only on this evidence would be upstream-hostile because the collected signal is consistent with normal blocking wait behavior.

## Validation

First try the project entrypoint from the workspace root:

```sh
./configure && make
```

If it fails because generated files or dependencies are missing, record the exact command and failure reason, then run the narrowest relevant build such as:

```sh
make sshd-session
```

Bounded independent evidence attempt, if the build succeeds:

```sh
make tests LTESTS=connect-privsep
```

If a test session is available, sample the spawned `sshd-session` with `strace -ttT -p <pid>` and/or a symbolized backtrace. Do not claim `reproduced` unless this shows sustained CPU use or repeated userspace activity attributable to OpenSSH.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop. A speculative timeout or wakeup change would risk changing valid idle SSH session behavior without addressing a demonstrated bug.

## Evidence Confidence
inferred

## Issue Connection
The likely root cause from the collected signal is normal blocking monitor behavior, not a proven runaway loop. The evidence shows `sshd-session: gis [priv]` with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, a single `restart_syscall` line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The sampled hot symbols are kernel memory-management paths, not symbolized OpenSSH frames.

In OpenSSH, privilege separation means a privileged monitor process remains available for root-only operations. Nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)` for monitor/log fds, and the session loop blocks in `ppoll()` through the local `ptimeout_*` helpers.

I made no source change and did not apply the prior `buildpkg.sh` patch, because that file is unrelated to the collected sshd-session evidence and would not be upstream-ready. Local conventions checked include `README.md`, `README.privsep`, `regress/README.regress`, `fatal_f`/`error_f`/`debug_f`, `ssh_signal()`, `xmalloc`, `atomicio`, `ptimeout_*`, and the OpenSSH poll/ppoll compatibility wrappers. No helper was needed because no code is changing.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

Fallback compile: `autoreconf && ./configure && make sshd-session` completed and linked `sshd-session`.

Bounded independent reproduction attempt: `make tests LTESTS=connect-privsep` failed before exercising a privsep session: `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Smoke check: `./sshd-session` exited with `sshd-session should not be executed directly`, so it is not a standalone reproducer. No command reproduced sustained CPU use or a userspace loop.

Validation artifacts were removed; final `git status --short` is clean.

## Review Pass 1

RESULT: ok

No changed paths remain in the workspace, and `## Git Add Paths` correctly lists `None`.

The response keeps `## Evidence Confidence` at `inferred`, does not claim a reproduced OpenSSH bug, and explains why the profiler/strace evidence is insufficient for an upstream source patch. It also rejects the unrelated prior `buildpkg.sh` patch and names relevant local conventions/helpers.

Validation is acceptable for a no-patch diagnosis: it reports the project-level `./configure && make` blocker, a focused `sshd-session` build after `autoreconf`, and a bounded reproduction attempt that failed before reaching a privsep session.

Diff

--- a/buildpkg.sh	1970-01-01 04:00:00.000000000 +0400
+++ b/buildpkg.sh	2026-05-10 11:49:02.013074241 +0400
@@ -0,0 +1,677 @@
+#!/bin/sh
+#
+# Fake Root Solaris/SVR4/SVR5 Build System - Prototype
+#
+# The following code has been provide under Public Domain License.  I really
+# don't care what you use it for.  Just as long as you don't complain to me
+# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
+#
+umask 022
+#
+# Options for building the package
+# You can create a openssh-config.local with your customized options
+#
+REMOVE_FAKE_ROOT_WHEN_DONE=yes
+#
+# uncommenting TEST_DIR and using
+# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
+# and
+# PKGNAME=tOpenSSH should allow testing a package without interfering
+# with a real OpenSSH package on a system. This is not needed on systems
+# that support the -R option to pkgadd.
+#TEST_DIR=/var/tmp	# leave commented out for production build
+PKGNAME=OpenSSH
+# revisions within the same version (REV=a)
+#REV=
+SYSVINIT_NAME=opensshd
+AWK=${AWK:="nawk"}
+MAKE=${MAKE:="make"}
+SSHDUID=67	# Default privsep uid
+SSHDGID=67	# Default privsep gid
+# uncomment these next three as needed
+#PERMIT_ROOT_LOGIN=no
+#X11_FORWARDING=yes
+#USR_LOCAL_IS_SYMLINK=yes
+# System V init run levels
+SYSVINITSTART=S98
+SYSVINITSTOP=K30
+# We will source these if they exist
+POST_MAKE_INSTALL_FIXES=./pkg-post-make-install-fixes.sh
+POST_PROTOTYPE_EDITS=./pkg-post-prototype-edit.sh
+# We'll be one level deeper looking for these
+PKG_PREINSTALL_LOCAL=../pkg-preinstall.local
+PKG_POSTINSTALL_LOCAL=../pkg-postinstall.local
+PKG_PREREMOVE_LOCAL=../pkg-preremove.local
+PKG_POSTREMOVE_LOCAL=../pkg-postremove.local
+PKG_REQUEST_LOCAL=../pkg-request.local
+# end of sourced files
+#
+OPENSSHD=opensshd.init
+OPENSSH_MANIFEST=openssh.xml
+OPENSSH_FMRI=svc:/site/${SYSVINIT_NAME}:default
+SMF_METHOD_DIR=/lib/svc/method/site
+SMF_MANIFEST_DIR=/var/svc/manifest/site
+
+PATH_GROUPADD_PROG=/usr/sbin/groupadd
+PATH_USERADD_PROG=/usr/sbin/useradd
+PATH_PASSWD_PROG=/usr/bin/passwd
+#
+# list of system directories we do NOT want to change owner/group/perms
+# when installing our package
+SYSTEM_DIR="/etc	\
+/etc/init.d		\
+/etc/rcS.d		\
+/etc/rc0.d		\
+/etc/rc1.d		\
+/etc/rc2.d		\
+/etc/opt		\
+/lib			\
+/lib/svc		\
+/lib/svc/method		\
+/lib/svc/method/site	\
+/opt			\
+/opt/bin		\
+/usr			\
+/usr/bin		\
+/usr/lib		\
+/usr/sbin		\
+/usr/share		\
+/usr/share/man		\
+/usr/share/man/man1	\
+/usr/share/man/man8	\
+/usr/local		\
+/usr/local/bin		\
+/usr/local/etc		\
+/usr/local/libexec	\
+/usr/local/man		\
+/usr/local/man/man1	\
+/usr/local/man/man8	\
+/usr/local/sbin		\
+/usr/local/share	\
+/var			\
+/var/opt		\
+/var/run		\
+/var/svc		\
+/var/svc/manifest	\
+/var/svc/manifest/site  \
+/var/tmp		\
+/tmp"
+
+# We may need to build as root so we make sure PATH is set up
+# only set the path if it's not set already
+[ -d /opt/bin ]  &&  {
+	echo $PATH | grep ":/opt/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/opt/bin
+}
+[ -d /usr/local/bin ]  &&  {
+	echo $PATH | grep ":/usr/local/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
+}
+[ -d /usr/ccs/bin ]  &&  {
+	echo $PATH | grep ":/usr/ccs/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
+}
+export PATH
+#
+
+[ -f Makefile ]  ||  {
+	echo "Please run this script from your build directory"
+	exit 1
+}
+
+# we will look for openssh-config.local to override the above options
+[ -s ./openssh-config.local ]  &&  . ./openssh-config.local
+
+START=`pwd`
+FAKE_ROOT=$START/pkg
+
+## Fill in some details, like prefix and sysconfdir
+for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir
+do
+	eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
+done
+
+## Are we using Solaris' SMF?
+DO_SMF=0
+if egrep "^#define USE_SOLARIS_PROCESS_CONTRACTS" config.h > /dev/null 2>&1
+then
+	DO_SMF=1
+fi
+
+## Collect value of privsep user
+for confvar in SSH_PRIVSEP_USER
+do
+	eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
+done
+
+## Set privsep defaults if not defined
+if [ -z "$SSH_PRIVSEP_USER" ]
+then
+	SSH_PRIVSEP_USER=sshd
+fi
+
+## Extract common info requires for the 'info' part of the package.
+VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'`
+
+ARCH=`uname -m`
+DEF_MSG="\n"
+OS_VER=`uname -v`
+SCRIPT_SHELL=/sbin/sh
+UNAME_R=`uname -r`
+UNAME_S=`uname -s`
+case ${UNAME_S} in
+	SunOS)	UNAME_S=Solaris
+		OS_VER=${UNAME_R}
+		ARCH=`uname -p`
+		RCS_D=yes
+		DEF_MSG="(default: n)"
+		;;
+	SCO_SV)	case ${UNAME_R} in
+			3.2)	UNAME_S=OpenServer5
+		OS_VER=`uname -X | grep Release | sed -e 's/^Rel.*3.2v//'`
+				;;
+			5)	UNAME_S=OpenServer6
+				;;
+		esac
+		SCRIPT_SHELL=/bin/sh
+		RC1_D=no
+		DEF_MSG="(default: n)"
+		;;
+esac
+
+case `basename $0` in
+	buildpkg.sh)
+## Start by faking root install
+echo "Faking root install..."
+[ -d $FAKE_ROOT ]  &&  rm -fr $FAKE_ROOT
+mkdir $FAKE_ROOT
+${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
+if [ $? -gt 0 ]
+then
+	echo "Fake root install failed, stopping."
+	exit 1
+fi
+
+## Setup our run level stuff while we are at it.
+if [ $DO_SMF -eq 1 ]
+then
+	# For Solaris' SMF, /lib/svc/method/site is the preferred place
+	# for start/stop scripts that aren't supplied with the OS, and
+	# similarly /var/svc/manifest/site for manifests.
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+
+	cat ${OPENSSH_MANIFEST} | \
+	    sed -e "s|__SYSVINIT_NAME__|${SYSVINIT_NAME}|" \
+	    -e "s|__SMF_METHOD_DIR__|${SMF_METHOD_DIR}|" \
+	    > $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+	chmod 644 $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+fi
+
+[ "${PERMIT_ROOT_LOGIN}" = no ]  &&  \
+	perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+[ "${X11_FORWARDING}" = yes ]  &&  \
+	perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+# fix PrintMotd
+perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
+	$FAKE_ROOT${sysconfdir}/sshd_config
+
+# We don't want to overwrite config files on multiple installs
+mv $FAKE_ROOT${sysconfdir}/ssh_config $FAKE_ROOT${sysconfdir}/ssh_config.default
+mv $FAKE_ROOT${sysconfdir}/sshd_config $FAKE_ROOT${sysconfdir}/sshd_config.default
+
+# local tweeks here
+[ -s "${POST_MAKE_INSTALL_FIXES}" ]  &&  . ${POST_MAKE_INSTALL_FIXES}
+
+cd $FAKE_ROOT
+
+## Ok, this is outright wrong, but it will work.  I'm tired of pkgmk
+## whining.
+for i in *; do
+  PROTO_ARGS="$PROTO_ARGS $i=/$i";
+done
+
+## Build info file
+echo "Building pkginfo file..."
+cat > pkginfo << _EOF
+PKG=$PKGNAME
+NAME="OpenSSH Portable for ${UNAME_S}"
+DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
+VENDOR="OpenSSH Portable Team - https://www.openssh.com/portable.html"
+ARCH=$ARCH
+VERSION=$VERSION$REV
+CATEGORY="Security,application"
+BASEDIR=/
+CLASSES="none"
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+
+## Build empty depend file that may get updated by $POST_PROTOTYPE_EDITS
+echo "Building depend file..."
+touch depend
+
+## Build space file
+echo "Building space file..."
+if [ $DO_SMF -eq 1 ]
+then
+	# XXX Is this necessary?  If not, remove space line from mk-proto.awk.
+	touch space
+else
+	cat > space << _EOF
+# extra space required by start/stop links added by installf
+# in postinstall
+$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1
+$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME} 0 1
+_EOF
+	[ "$RC1_D" = no ]  ||  \
+	echo "$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+	[ "$RCS_D" = yes ]  &&  \
+	echo "$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+fi
+
+## Build preinstall file
+echo "Building preinstall file..."
+cat > preinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+_EOF
+
+# local preinstall changes here
+[ -s "${PKG_PREINSTALL_LOCAL}" ]  &&  . ${PKG_PREINSTALL_LOCAL}
+
+cat >> preinstall << _EOF
+#
+if [ "\${PRE_INS_STOP}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm disable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+	fi
+fi
+
+exit 0
+_EOF
+
+## Build postinstall file
+echo "Building postinstall file..."
+cat > postinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
+
+# make rc?.d dirs only if we are doing a test install
+[ -n "${TEST_DIR}" ]  &&  [ $DO_SMF -ne 1 ] && {
+	[ "$RCS_D" = yes ]  &&  mkdir -p ${TEST_DIR}/etc/rcS.d
+	mkdir -p ${TEST_DIR}/etc/rc0.d
+	[ "$RC1_D" = no ]  ||  mkdir -p ${TEST_DIR}/etc/rc1.d
+	mkdir -p ${TEST_DIR}/etc/rc2.d
+}
+
+if [ $DO_SMF -eq 1 ]
+then
+	# Delete the existing service, if it exists, then import the
+	# new one.
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+	# NOTE, The manifest disables sshd by default.
+	svccfg import ${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	if [ "\${USE_SYM_LINKS}" = yes ]
+	then
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+	else
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+	fi
+fi
+
+# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
+[ -d $piddir ]  ||  installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 0755 root sys
+
+_EOF
+
+# local postinstall changes here
+[ -s "${PKG_POSTINSTALL_LOCAL}" ]  &&  . ${PKG_POSTINSTALL_LOCAL}
+
+cat >> postinstall << _EOF
+installf -f ${PKGNAME}
+
+# Use chroot to handle PKG_INSTALL_ROOT
+if [ ! -z "\${PKG_INSTALL_ROOT}" ]
+then
+	chroot="chroot \${PKG_INSTALL_ROOT}"
+fi
+# If this is a test build, we will skip the groupadd/useradd/passwd commands
+if [ ! -z "${TEST_DIR}" ]
+then
+	chroot=echo
+fi
+
+	echo "PrivilegeSeparation user always required."
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
+	then
+		echo "PrivSep user $SSH_PRIVSEP_USER already exists."
+		SSH_PRIVSEP_GROUP=\`grep "^$SSH_PRIVSEP_USER:" \${PKG_INSTALL_ROOT}/etc/passwd | awk -F: '{print \$4}'\`
+		SSH_PRIVSEP_GROUP=\`grep ":\$SSH_PRIVSEP_GROUP:" \${PKG_INSTALL_ROOT}/etc/group | awk -F: '{print \$1}'\`
+	else
+		DO_PASSWD=yes
+	fi
+	[ -z "\$SSH_PRIVSEP_GROUP" ]  &&  SSH_PRIVSEP_GROUP=$SSH_PRIVSEP_USER
+
+	# group required?
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'\$SSH_PRIVSEP_GROUP'\$' >/dev/null
+	then
+		echo "PrivSep group \$SSH_PRIVSEP_GROUP already exists."
+	else
+		DO_GROUP=yes
+	fi
+
+	# create group if required
+	[ "\$DO_GROUP" = yes ]  &&  {
+		# Use gid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
+		then
+			:
+		else
+			sshdgid="-g $SSHDGID"
+		fi
+		echo "Creating PrivSep group \$SSH_PRIVSEP_GROUP."
+		\$chroot ${PATH_GROUPADD_PROG} \$sshdgid \$SSH_PRIVSEP_GROUP
+	}
+
+	# Create user if required
+	[ "\$DO_PASSWD" = yes ]  &&  {
+		# Use uid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDUID'\$' >/dev/null
+		then
+			:
+		else
+			sshduid="-u $SSHDUID"
+		fi
+		echo "Creating PrivSep user $SSH_PRIVSEP_USER."
+		\$chroot ${PATH_USERADD_PROG} -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
+		\$chroot ${PATH_PASSWD_PROG} -l $SSH_PRIVSEP_USER
+	}
+
+if [ "\${POST_INS_START}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm enable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
+	fi
+fi
+exit 0
+_EOF
+
+## Build preremove file
+echo "Building preremove file..."
+cat > preremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	svcadm disable $OPENSSH_FMRI
+else
+	${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+fi
+_EOF
+
+# local preremove changes here
+[ -s "${PKG_PREREMOVE_LOCAL}" ]  &&  . ${PKG_PREREMOVE_LOCAL}
+
+cat >> preremove << _EOF
+exit 0
+_EOF
+
+## Build postremove file
+echo "Building postremove file..."
+cat > postremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+fi
+_EOF
+
+# local postremove changes here
+[ -s "${PKG_POSTREMOVE_LOCAL}" ]  &&  . ${PKG_POSTREMOVE_LOCAL}
+
+cat >> postremove << _EOF
+exit 0
+_EOF
+
+## Build request file
+echo "Building request file..."
+cat > request << _EOF
+trap 'exit 3' 15
+
+_EOF
+
+[ -x /usr/bin/ckyorn ]  ||  cat >> request << _EOF
+
+ckyorn() {
+# for some strange reason OpenServer5 has no ckyorn
+# We build a striped down version here
+
+DEFAULT=n
+PROMPT="Yes or No [yes,no,?,quit]"
+HELP_PROMPT="        Enter y or yes if your answer is yes; n or no if your answer is no."
+USAGE="usage: ckyorn [options]
+where options may include:
+        -d default
+        -h help
+        -p prompt
+"
+
+if [ \$# != 0 ]
+then
+	while getopts d:p:h: c
+	do
+		case \$c in
+			h)	HELP_PROMPT="\$OPTARG" ;;
+			d)	DEFAULT=\$OPTARG ;;
+			p)	PROMPT=\$OPTARG ;;
+			\\?)	echo "\$USAGE" 1>&2
+				exit 1 ;;
+		esac
+	done
+	shift \`expr \$OPTIND - 1\`
+fi
+
+while true
+do
+	echo "\${PROMPT}\\c " 1>&2
+	read key
+	[ -z "\$key" ]  &&  key=\$DEFAULT
+	case \$key in
+		[n,N]|[n,N][o,O]|[y,Y]|[y,Y][e,E][s,S])	echo "\${key}\\c"
+			exit 0 ;;
+		\\?)	echo \$HELP_PROMPT 1>&2 ;;
+		q|quit)	echo "q\\c" 1>&2
+			exit 3 ;;
+	esac
+done
+
+}
+
+_EOF
+
+if [ $DO_SMF -eq 1 ]
+then
+	# This could get hairy, as the running sshd may not be under SMF.
+	# We'll assume an earlier version of OpenSSH started via SMF.
+	cat >> request << _EOF
+PRE_INS_STOP=no
+POST_INS_START=no
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  ] && \\
+    /usr/bin/svcs -H $OPENSSH_FMRI 2>&1 | egrep "^online" > /dev/null 2>&1
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+else
+	cat >> request << _EOF
+USE_SYM_LINKS=no
+PRE_INS_STOP=no
+POST_INS_START=no
+# Use symbolic links?
+ans=\`ckyorn -d n \\
+-p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$?
+case \$ans in
+	[y,Y]*)	USE_SYM_LINKS=yes ;;
+esac
+
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  -a  -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+USE_SYM_LINKS='\$USE_SYM_LINKS'
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+fi
+
+# local request changes here
+[ -s "${PKG_REQUEST_LOCAL}" ]  &&  . ${PKG_REQUEST_LOCAL}
+
+cat >> request << _EOF
+exit 0
+
+_EOF
+
+## Next Build our prototype
+echo "Building prototype file..."
+cat >mk-proto.awk << _EOF
+	    BEGIN { print "i pkginfo"; print "i depend"; \\
+		    print "i preinstall"; print "i postinstall"; \\
+ 		    print "i preremove"; print "i postremove"; \\
+		    print "i request"; print "i space"; \\
+		    split("$SYSTEM_DIR",sys_files); }
+	    {
+	     for (dir in sys_files) { if ( \$3 != sys_files[dir] )
+		     { if ( \$1 == "s" )
+			{ \$5=""; \$6=""; }
+		     else
+			{ \$5="root"; \$6="sys"; }
+		     }
+		else
+		     { \$4="?"; \$5="?"; \$6="?"; break;}
+	    } }
+	    { print; }
+_EOF
+
+find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \
+	pkgproto $PROTO_ARGS | ${AWK} -f mk-proto.awk > prototype
+
+# /usr/local is a symlink on some systems
+[ "${USR_LOCAL_IS_SYMLINK}" = yes ]  &&  {
+	grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
+	mv prototype.new prototype
+}
+
+## Step back a directory and now build the package.
+cd ..
+# local prototype tweeks here
+[ -s "${POST_PROTOTYPE_EDITS}" ]  &&  . ${POST_PROTOTYPE_EDITS}
+
+echo "Building package.."
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+	justpkg.sh)
+rm -fr ${FAKE_ROOT}/${PKGNAME}
+grep -v "^PSTAMP=" $FAKE_ROOT/pkginfo > $$tmp
+mv $$tmp $FAKE_ROOT/pkginfo
+cat >> $FAKE_ROOT/pkginfo << _EOF
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+esac
+
+[ "${REMOVE_FAKE_ROOT_WHEN_DONE}" = yes ]  &&  rm -rf $FAKE_ROOT
+exit 0
+
--- a/config.h.in~	1970-01-01 04:00:00.000000000 +0400
+++ b/config.h.in~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,2107 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
+/* Define if you have a getaddrinfo that fails for the all-zeros IPv6 address
+   */
+#undef AIX_GETNAMEINFO_HACK
+
+/* Define if your AIX loginfailed() function takes 4 arguments (AIX >= 5.2) */
+#undef AIX_LOGINFAILED_4ARG
+
+/* System only supports IPv4 audit records */
+#undef AU_IPv4
+
+/* Define if your resolver libs need this for getrrsetbyname */
+#undef BIND_8_COMPAT
+
+/* The system has incomplete BSM API */
+#undef BROKEN_BSM_API
+
+/* broken in chroots on older kernels */
+#undef BROKEN_CLOSEFROM
+
+/* Define if cmsg_type is not passed correctly */
+#undef BROKEN_CMSG_TYPE
+
+/* getaddrinfo is broken (if present) */
+#undef BROKEN_GETADDRINFO
+
+/* getgroups(0,NULL) will return -1 */
+#undef BROKEN_GETGROUPS
+
+/* getline is not what we expect */
+#undef BROKEN_GETLINE
+
+/* Do not use system glob */
+#undef BROKEN_GLOB
+
+/* Define if you system's inet_ntoa is busted (e.g. Irix gcc issue) */
+#undef BROKEN_INET_NTOA
+
+/* Define if your struct dirent expects you to allocate extra space for d_name
+   */
+#undef BROKEN_ONE_BYTE_DIRENT_D_NAME
+
+/* System poll(2) implementation is broken */
+#undef BROKEN_POLL
+
+/* Can't do comparisons on readv */
+#undef BROKEN_READV_COMPARISON
+
+/* NetBSD read function is sometimes redirected, breaking atomicio comparisons
+   against it */
+#undef BROKEN_READ_COMPARISON
+
+/* Needed for NeXT */
+#undef BROKEN_SAVED_UIDS
+
+/* Define if your setregid() is broken */
+#undef BROKEN_SETREGID
+
+/* Define if your setresgid() is broken */
+#undef BROKEN_SETRESGID
+
+/* Define if your setresuid() is broken */
+#undef BROKEN_SETRESUID
+
+/* Define if your setreuid() is broken */
+#undef BROKEN_SETREUID
+
+/* LynxOS has broken setvbuf() implementation */
+#undef BROKEN_SETVBUF
+
+/* QNX shadow support is broken */
+#undef BROKEN_SHADOW_EXPIRE
+
+/* Define if your snprintf is busted */
+#undef BROKEN_SNPRINTF
+
+/* strndup broken, see APAR IY61211 */
+#undef BROKEN_STRNDUP
+
+/* strnlen broken, see APAR IY62551 */
+#undef BROKEN_STRNLEN
+
+/* strnvis detected broken */
+#undef BROKEN_STRNVIS
+
+/* tcgetattr with ICANON may hang */
+#undef BROKEN_TCGETATTR_ICANON
+
+/* updwtmpx is broken (if present) */
+#undef BROKEN_UPDWTMPX
+
+/* Define if you have BSD auth support */
+#undef BSD_AUTH
+
+/* Define if you want to specify the path to your lastlog file */
+#undef CONF_LASTLOG_FILE
+
+/* Define if you want to specify the path to your utmp file */
+#undef CONF_UTMP_FILE
+
+/* Define if you want to specify the path to your wtmpx file */
+#undef CONF_WTMPX_FILE
+
+/* Define if you want to specify the path to your wtmp file */
+#undef CONF_WTMP_FILE
+
+/* Need to call setpgrp as root */
+#undef DISABLE_FD_PASSING
+
+/* Define if you don't want to use lastlog */
+#undef DISABLE_LASTLOG
+
+/* Define if you don't want to use your system's login() call */
+#undef DISABLE_LOGIN
+
+/* Define if you don't want to use pututline() etc. to write [uw]tmp */
+#undef DISABLE_PUTUTLINE
+
+/* Define if you don't want to use pututxline() etc. to write [uw]tmpx */
+#undef DISABLE_PUTUTXLINE
+
+/* Define if you want to disable shadow passwords */
+#undef DISABLE_SHADOW
+
+/* Define if you don't want to use utmp */
+#undef DISABLE_UTMP
+
+/* Define if you don't want to use utmpx */
+#undef DISABLE_UTMPX
+
+/* Define if you don't want to use wtmp */
+#undef DISABLE_WTMP
+
+/* Define if you don't want to use wtmpx */
+#undef DISABLE_WTMPX
+
+/* Enable for PKCS#11 support */
+#undef ENABLE_PKCS11
+
+/* Enable for U2F/FIDO support */
+#undef ENABLE_SK
+
+/* Enable for built-in U2F/FIDO support */
+#undef ENABLE_SK_INTERNAL
+
+/* define if fflush(NULL) does not work */
+#undef FFLUSH_NULL_BUG
+
+/* File names may not contain backslash characters */
+#undef FILESYSTEM_NO_BACKSLASH
+
+/* fsid_t has member val */
+#undef FSID_HAS_VAL
+
+/* fsid_t has member __val */
+#undef FSID_HAS___VAL
+
+/* getpgrp takes one arg */
+#undef GETPGRP_VOID
+
+/* Conflicting defs for getspnam */
+#undef GETSPNAM_CONFLICTING_DEFS
+
+/* Define if your system glob() function has the GLOB_ALTDIRFUNC extension */
+#undef GLOB_HAS_ALTDIRFUNC
+
+/* Define if your system glob() function has gl_matchc options in glob_t */
+#undef GLOB_HAS_GL_MATCHC
+
+/* Define if your system glob() function has gl_statv options in glob_t */
+#undef GLOB_HAS_GL_STATV
+
+/* Define this if you want GSSAPI support in the version 2 protocol */
+#undef GSSAPI
+
+/* Define if you want to use shadow password expire field */
+#undef HAS_SHADOW_EXPIRE
+
+/* Define if your system uses access rights style file descriptor passing */
+#undef HAVE_ACCRIGHTS_IN_MSGHDR
+
+/* Define if you have ut_addr in utmp.h */
+#undef HAVE_ADDR_IN_UTMP
+
+/* Define if you have ut_addr in utmpx.h */
+#undef HAVE_ADDR_IN_UTMPX
+
+/* Define if you have ut_addr_v6 in utmp.h */
+#undef HAVE_ADDR_V6_IN_UTMP
+
+/* Define if you have ut_addr_v6 in utmpx.h */
+#undef HAVE_ADDR_V6_IN_UTMPX
+
+/* Define to 1 if you have the `arc4random' function. */
+#undef HAVE_ARC4RANDOM
+
+/* Define to 1 if you have the `arc4random_buf' function. */
+#undef HAVE_ARC4RANDOM_BUF
+
+/* Define to 1 if you have the `arc4random_stir' function. */
+#undef HAVE_ARC4RANDOM_STIR
+
+/* Define to 1 if you have the `arc4random_uniform' function. */
+#undef HAVE_ARC4RANDOM_UNIFORM
+
+/* Define to 1 if you have the `asprintf' function. */
+#undef HAVE_ASPRINTF
+
+/* OpenBSD's gcc has bounded */
+#undef HAVE_ATTRIBUTE__BOUNDED__
+
+/* Have attribute nonnull */
+#undef HAVE_ATTRIBUTE__NONNULL__
+
+/* compiler supports nonstring attribute */
+#undef HAVE_ATTRIBUTE__NONSTRING__
+
+/* OpenBSD's gcc has sentinel */
+#undef HAVE_ATTRIBUTE__SENTINEL__
+
+/* Define to 1 if you have the `aug_get_machine' function. */
+#undef HAVE_AUG_GET_MACHINE
+
+/* Define to 1 if you have the `auth_hostok' function. */
+#undef HAVE_AUTH_HOSTOK
+
+/* Define to 1 if you have the `auth_timeok' function. */
+#undef HAVE_AUTH_TIMEOK
+
+/* Define to 1 if you have the `b64_ntop' function. */
+#undef HAVE_B64_NTOP
+
+/* Define to 1 if you have the `b64_pton' function. */
+#undef HAVE_B64_PTON
+
+/* Define if you have the basename function. */
+#undef HAVE_BASENAME
+
+/* Define to 1 if you have the `bcopy' function. */
+#undef HAVE_BCOPY
+
+/* Define to 1 if you have the `bcrypt_pbkdf' function. */
+#undef HAVE_BCRYPT_PBKDF
+
+/* Define to 1 if you have the `bindresvport_sa' function. */
+#undef HAVE_BINDRESVPORT_SA
+
+/* Define to 1 if you have the `blf_enc' function. */
+#undef HAVE_BLF_ENC
+
+/* Define to 1 if you have the <blf.h> header file. */
+#undef HAVE_BLF_H
+
+/* Define to 1 if you have the `Blowfish_expand0state' function. */
+#undef HAVE_BLOWFISH_EXPAND0STATE
+
+/* Define to 1 if you have the `Blowfish_expandstate' function. */
+#undef HAVE_BLOWFISH_EXPANDSTATE
+
+/* Define to 1 if you have the `Blowfish_initstate' function. */
+#undef HAVE_BLOWFISH_INITSTATE
+
+/* Define to 1 if you have the `Blowfish_stream2word' function. */
+#undef HAVE_BLOWFISH_STREAM2WORD
+
+/* Define to 1 if you have the `BN_is_prime_ex' function. */
+#undef HAVE_BN_IS_PRIME_EX
+
+/* Define to 1 if you have the <bsd/libutil.h> header file. */
+#undef HAVE_BSD_LIBUTIL_H
+
+/* Define to 1 if you have the <bsm/audit.h> header file. */
+#undef HAVE_BSM_AUDIT_H
+
+/* Define to 1 if you have the <bstring.h> header file. */
+#undef HAVE_BSTRING_H
+
+/* Define to 1 if you have the `bzero' function. */
+#undef HAVE_BZERO
+
+/* calloc(0, x) returns NULL */
+#undef HAVE_CALLOC
+
+/* Define if you have caph_cache_tzdata */
+#undef HAVE_CAPH_CACHE_TZDATA
+
+/* Define to 1 if you have the <capsicum_helpers.h> header file. */
+#undef HAVE_CAPSICUM_HELPERS_H
+
+/* Define to 1 if you have the `cap_rights_limit' function. */
+#undef HAVE_CAP_RIGHTS_LIMIT
+
+/* Define to 1 if you have the `clock' function. */
+#undef HAVE_CLOCK
+
+/* Have clock_gettime */
+#undef HAVE_CLOCK_GETTIME
+
+/* define if you have clock_t data type */
+#undef HAVE_CLOCK_T
+
+/* Define to 1 if you have the `closefrom' function. */
+#undef HAVE_CLOSEFROM
+
+/* Define to 1 if you have the `close_range' function. */
+#undef HAVE_CLOSE_RANGE
+
+/* Define if gai_strerror() returns const char * */
+#undef HAVE_CONST_GAI_STRERROR_PROTO
+
+/* Define if your system uses ancillary data style file descriptor passing */
+#undef HAVE_CONTROL_IN_MSGHDR
+
+/* Define to 1 if you have the `crypt' function. */
+#undef HAVE_CRYPT
+
+/* Define to 1 if you have the <crypto/sha2.h> header file. */
+#undef HAVE_CRYPTO_SHA2_H
+
+/* Define to 1 if you have the <crypt.h> header file. */
+#undef HAVE_CRYPT_H
+
+/* Define if you are on Cygwin */
+#undef HAVE_CYGWIN
+
+/* Define if your libraries define daemon() */
+#undef HAVE_DAEMON
+
+/* Define to 1 if you have the declaration of `AI_NUMERICSERV', and to 0 if
+   you don't. */
+#undef HAVE_DECL_AI_NUMERICSERV
+
+/* Define to 1 if you have the declaration of `authenticate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_AUTHENTICATE
+
+/* Define to 1 if you have the declaration of `bzero', and to 0 if you don't.
+   */
+#undef HAVE_DECL_BZERO
+
+/* Define to 1 if you have the declaration of `ftruncate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_FTRUNCATE
+
+/* Define to 1 if you have the declaration of `getentropy', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETENTROPY
+
+/* Define to 1 if you have the declaration of `getpeereid', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETPEEREID
+
+/* Define to 1 if you have the declaration of `GLOB_NOMATCH', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GLOB_NOMATCH
+
+/* Define to 1 if you have the declaration of `GSS_C_NT_HOSTBASED_SERVICE',
+   and to 0 if you don't. */
+#undef HAVE_DECL_GSS_C_NT_HOSTBASED_SERVICE
+
+/* Define to 1 if you have the declaration of `howmany', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HOWMANY
+
+/* Define to 1 if you have the declaration of `htole64', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HTOLE64
+
+/* Define to 1 if you have the declaration of `h_errno', and to 0 if you
+   don't. */
+#undef HAVE_DECL_H_ERRNO
+
+/* Define to 1 if you have the declaration of `INFINITY', and to 0 if you
+   don't. */
+#undef HAVE_DECL_INFINITY
+
+/* Define to 1 if you have the declaration of `le32toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE32TOH
+
+/* Define to 1 if you have the declaration of `le64toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE64TOH
+
+/* Define to 1 if you have the declaration of `loginfailed', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINFAILED
+
+/* Define to 1 if you have the declaration of `loginrestrictions', and to 0 if
+   you don't. */
+#undef HAVE_DECL_LOGINRESTRICTIONS
+
+/* Define to 1 if you have the declaration of `loginsuccess', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINSUCCESS
+
+/* Define to 1 if you have the declaration of `MAXSYMLINKS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_MAXSYMLINKS
+
+/* Define to 1 if you have the declaration of `memmem', and to 0 if you don't.
+   */
+#undef HAVE_DECL_MEMMEM
+
+/* Define to 1 if you have the declaration of `NFDBITS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_NFDBITS
+
+/* Define to 1 if you have the declaration of `offsetof', and to 0 if you
+   don't. */
+#undef HAVE_DECL_OFFSETOF
+
+/* Define to 1 if you have the declaration of `O_NONBLOCK', and to 0 if you
+   don't. */
+#undef HAVE_DECL_O_NONBLOCK
+
+/* Define to 1 if you have the declaration of `passwdexpired', and to 0 if you
+   don't. */
+#undef HAVE_DECL_PASSWDEXPIRED
+
+/* Define to 1 if you have the declaration of `readv', and to 0 if you don't.
+   */
+#undef HAVE_DECL_READV
+
+/* Define to 1 if you have the declaration of `setauthdb', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SETAUTHDB
+
+/* Define to 1 if you have the declaration of `SHUT_RD', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SHUT_RD
+
+/* Define to 1 if you have the declaration of `UINT32_MAX', and to 0 if you
+   don't. */
+#undef HAVE_DECL_UINT32_MAX
+
+/* Define to 1 if you have the declaration of `writev', and to 0 if you don't.
+   */
+#undef HAVE_DECL_WRITEV
+
+/* Define to 1 if you have the declaration of `_getlong', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETLONG
+
+/* Define to 1 if you have the declaration of `_getshort', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETSHORT
+
+/* Define to 1 if you have the declaration of `__builtin_inff', and to 0 if
+   you don't. */
+#undef HAVE_DECL___BUILTIN_INFF
+
+/* Define to 1 if you have the `DES_crypt' function. */
+#undef HAVE_DES_CRYPT
+
+/* Define if you have /dev/ptmx */
+#undef HAVE_DEV_PTMX
+
+/* Define if you have /dev/ptc */
+#undef HAVE_DEV_PTS_AND_PTC
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the `dirfd' function. */
+#undef HAVE_DIRFD
+
+/* Define to 1 if you have the `dirname' function. */
+#undef HAVE_DIRNAME
+
+/* Define to 1 if you have the `dlopen' function. */
+#undef HAVE_DLOPEN
+
+/* Define to 1 if you have the `EC_KEY_METHOD_new' function. */
+#undef HAVE_EC_KEY_METHOD_NEW
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates' function. */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates' function. */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the <elf.h> header file. */
+#undef HAVE_ELF_H
+
+/* Define to 1 if you have the `endgrent' function. */
+#undef HAVE_ENDGRENT
+
+/* Define to 1 if you have the <endian.h> header file. */
+#undef HAVE_ENDIAN_H
+
+/* Define to 1 if you have the `endutent' function. */
+#undef HAVE_ENDUTENT
+
+/* Define to 1 if you have the `endutxent' function. */
+#undef HAVE_ENDUTXENT
+
+/* Define to 1 if you have the `err' function. */
+#undef HAVE_ERR
+
+/* Define to 1 if you have the `errx' function. */
+#undef HAVE_ERRX
+
+/* Define to 1 if you have the <err.h> header file. */
+#undef HAVE_ERR_H
+
+/* Define if your system has /etc/default/login */
+#undef HAVE_ETC_DEFAULT_LOGIN
+
+/* Define to 1 if you have the `EVP_chacha20' function. */
+#undef HAVE_EVP_CHACHA20
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_updated_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_UPDATED_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv_noconst' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV_NOCONST
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_set_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_SET_IV
+
+/* Define to 1 if you have the `EVP_DigestFinal_ex' function. */
+#undef HAVE_EVP_DIGESTFINAL_EX
+
+/* Define to 1 if you have the `EVP_DigestInit_ex' function. */
+#undef HAVE_EVP_DIGESTINIT_EX
+
+/* Define to 1 if you have the `EVP_DigestSign' function. */
+#undef HAVE_EVP_DIGESTSIGN
+
+/* Define to 1 if you have the `EVP_DigestVerify' function. */
+#undef HAVE_EVP_DIGESTVERIFY
+
+/* Define to 1 if you have the `EVP_MD_CTX_cleanup' function. */
+#undef HAVE_EVP_MD_CTX_CLEANUP
+
+/* Define to 1 if you have the `EVP_MD_CTX_copy_ex' function. */
+#undef HAVE_EVP_MD_CTX_COPY_EX
+
+/* Define to 1 if you have the `EVP_MD_CTX_init' function. */
+#undef HAVE_EVP_MD_CTX_INIT
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_private_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PRIVATE_KEY
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_public_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PUBLIC_KEY
+
+/* Define to 1 if you have the `EVP_sha256' function. */
+#undef HAVE_EVP_SHA256
+
+/* Define to 1 if you have the `EVP_sha384' function. */
+#undef HAVE_EVP_SHA384
+
+/* Define to 1 if you have the `EVP_sha512' function. */
+#undef HAVE_EVP_SHA512
+
+/* Define if you have ut_exit in utmp.h */
+#undef HAVE_EXIT_IN_UTMP
+
+/* Define to 1 if you have the `explicit_bzero' function. */
+#undef HAVE_EXPLICIT_BZERO
+
+/* Define to 1 if you have the `explicit_memset' function. */
+#undef HAVE_EXPLICIT_MEMSET
+
+/* Define to 1 if you have the `fchmod' function. */
+#undef HAVE_FCHMOD
+
+/* Define to 1 if you have the `fchmodat' function. */
+#undef HAVE_FCHMODAT
+
+/* Define to 1 if you have the `fchown' function. */
+#undef HAVE_FCHOWN
+
+/* Define to 1 if you have the `fchownat' function. */
+#undef HAVE_FCHOWNAT
+
+/* Use F_CLOSEM fcntl for closefrom */
+#undef HAVE_FCNTL_CLOSEM
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if the system has the type `fd_mask'. */
+#undef HAVE_FD_MASK
+
+/* Define to 1 if you have the <features.h> header file. */
+#undef HAVE_FEATURES_H
+
+/* Define to 1 if you have the `fido_assert_set_clientdata' function. */
+#undef HAVE_FIDO_ASSERT_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_prot' function. */
+#undef HAVE_FIDO_CRED_PROT
+
+/* Define to 1 if you have the `fido_cred_set_clientdata' function. */
+#undef HAVE_FIDO_CRED_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_set_prot' function. */
+#undef HAVE_FIDO_CRED_SET_PROT
+
+/* Define to 1 if you have the `fido_dev_get_touch_begin' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_BEGIN
+
+/* Define to 1 if you have the `fido_dev_get_touch_status' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_STATUS
+
+/* Define to 1 if you have the `fido_dev_is_winhello' function. */
+#undef HAVE_FIDO_DEV_IS_WINHELLO
+
+/* Define to 1 if you have the `fido_dev_supports_cred_prot' function. */
+#undef HAVE_FIDO_DEV_SUPPORTS_CRED_PROT
+
+/* Define to 1 if you have the <floatingpoint.h> header file. */
+#undef HAVE_FLOATINGPOINT_H
+
+/* Define to 1 if you have the `flock' function. */
+#undef HAVE_FLOCK
+
+/* Define to 1 if you have the `fmt_scaled' function. */
+#undef HAVE_FMT_SCALED
+
+/* Define to 1 if you have the `fnmatch' function. */
+#undef HAVE_FNMATCH
+
+/* Define to 1 if you have the <fnmatch.h> header file. */
+#undef HAVE_FNMATCH_H
+
+/* Define to 1 if you have the `freeaddrinfo' function. */
+#undef HAVE_FREEADDRINFO
+
+/* Define to 1 if you have the `freezero' function. */
+#undef HAVE_FREEZERO
+
+/* Define to 1 if the system has the type `fsblkcnt_t'. */
+#undef HAVE_FSBLKCNT_T
+
+/* Define to 1 if the system has the type `fsfilcnt_t'. */
+#undef HAVE_FSFILCNT_T
+
+/* Define to 1 if you have the `fstatat' function. */
+#undef HAVE_FSTATAT
+
+/* Define to 1 if you have the `fstatfs' function. */
+#undef HAVE_FSTATFS
+
+/* Define to 1 if you have the `fstatvfs' function. */
+#undef HAVE_FSTATVFS
+
+/* Define to 1 if you have the `futimes' function. */
+#undef HAVE_FUTIMES
+
+/* Define to 1 if you have the `gai_strerror' function. */
+#undef HAVE_GAI_STRERROR
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+#undef HAVE_GETADDRINFO
+
+/* Define to 1 if you have the `getaudit' function. */
+#undef HAVE_GETAUDIT
+
+/* Define to 1 if you have the `getaudit_addr' function. */
+#undef HAVE_GETAUDIT_ADDR
+
+/* Define to 1 if you have the `getcwd' function. */
+#undef HAVE_GETCWD
+
+/* Define to 1 if you have the `getentropy' function. */
+#undef HAVE_GETENTROPY
+
+/* Define to 1 if you have the `getgrouplist' function. */
+#undef HAVE_GETGROUPLIST
+
+/* Define to 1 if you have the `getgrset' function. */
+#undef HAVE_GETGRSET
+
+/* Define to 1 if you have the `getlastlogxbyname' function. */
+#undef HAVE_GETLASTLOGXBYNAME
+
+/* Define to 1 if you have the `getline' function. */
+#undef HAVE_GETLINE
+
+/* Define to 1 if you have the `getluid' function. */
+#undef HAVE_GETLUID
+
+/* Define to 1 if you have the `getnameinfo' function. */
+#undef HAVE_GETNAMEINFO
+
+/* Define to 1 if you have the `getopt' function. */
+#undef HAVE_GETOPT
+
+/* Define to 1 if you have the <getopt.h> header file. */
+#undef HAVE_GETOPT_H
+
+/* Define if your getopt(3) defines and uses optreset */
+#undef HAVE_GETOPT_OPTRESET
+
+/* Define if your libraries define getpagesize() */
+#undef HAVE_GETPAGESIZE
+
+/* Define to 1 if you have the `getpeereid' function. */
+#undef HAVE_GETPEEREID
+
+/* Define to 1 if you have the `getpeerucred' function. */
+#undef HAVE_GETPEERUCRED
+
+/* Define to 1 if you have the `getpgid' function. */
+#undef HAVE_GETPGID
+
+/* Define to 1 if you have the `getpgrp' function. */
+#undef HAVE_GETPGRP
+
+/* Define to 1 if you have the `getpwanam' function. */
+#undef HAVE_GETPWANAM
+
+/* Define to 1 if you have the `getrandom' function. */
+#undef HAVE_GETRANDOM
+
+/* Define to 1 if you have the `getrlimit' function. */
+#undef HAVE_GETRLIMIT
+
+/* Define if getrrsetbyname() exists */
+#undef HAVE_GETRRSETBYNAME
+
+/* Define to 1 if you have the `getseuserbyname' function. */
+#undef HAVE_GETSEUSERBYNAME
+
+/* Define to 1 if you have the `getsid' function. */
+#undef HAVE_GETSID
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define to 1 if you have the `getttyent' function. */
+#undef HAVE_GETTTYENT
+
+/* Define to 1 if you have the `getutent' function. */
+#undef HAVE_GETUTENT
+
+/* Define to 1 if you have the `getutid' function. */
+#undef HAVE_GETUTID
+
+/* Define to 1 if you have the `getutline' function. */
+#undef HAVE_GETUTLINE
+
+/* Define to 1 if you have the `getutxent' function. */
+#undef HAVE_GETUTXENT
+
+/* Define to 1 if you have the `getutxid' function. */
+#undef HAVE_GETUTXID
+
+/* Define to 1 if you have the `getutxline' function. */
+#undef HAVE_GETUTXLINE
+
+/* Define to 1 if you have the `getutxuser' function. */
+#undef HAVE_GETUTXUSER
+
+/* Define to 1 if you have the `get_default_context_with_level' function. */
+#undef HAVE_GET_DEFAULT_CONTEXT_WITH_LEVEL
+
+/* Define to 1 if you have the `glob' function. */
+#undef HAVE_GLOB
+
+/* Define to 1 if you have the <glob.h> header file. */
+#undef HAVE_GLOB_H
+
+/* Define to 1 if you have the `group_from_gid' function. */
+#undef HAVE_GROUP_FROM_GID
+
+/* Define to 1 if you have the <gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi/gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_KRB5_H
+
+/* Define to 1 if you have the <gssapi.h> header file. */
+#undef HAVE_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_KRB5_H
+
+/* Define if HEADER.ad exists in arpa/nameser.h */
+#undef HAVE_HEADER_AD
+
+/* Define to 1 if you have the `HMAC_CTX_init' function. */
+#undef HAVE_HMAC_CTX_INIT
+
+/* Define if you have ut_host in utmp.h */
+#undef HAVE_HOST_IN_UTMP
+
+/* Define if you have ut_host in utmpx.h */
+#undef HAVE_HOST_IN_UTMPX
+
+/* Define to 1 if you have the <iaf.h> header file. */
+#undef HAVE_IAF_H
+
+/* Define to 1 if you have the <ia.h> header file. */
+#undef HAVE_IA_H
+
+/* Define if you have ut_id in utmp.h */
+#undef HAVE_ID_IN_UTMP
+
+/* Define if you have ut_id in utmpx.h */
+#undef HAVE_ID_IN_UTMPX
+
+/* Define to 1 if you have the <ifaddrs.h> header file. */
+#undef HAVE_IFADDRS_H
+
+/* Define to 1 if you have the `inet_aton' function. */
+#undef HAVE_INET_ATON
+
+/* Define to 1 if you have the `inet_ntoa' function. */
+#undef HAVE_INET_NTOA
+
+/* Define to 1 if you have the `inet_ntop' function. */
+#undef HAVE_INET_NTOP
+
+/* Define to 1 if you have the `innetgr' function. */
+#undef HAVE_INNETGR
+
+/* define if you have int64_t data type */
+#undef HAVE_INT64_T
+
+/* Define to 1 if the system has the type `intmax_t'. */
+#undef HAVE_INTMAX_T
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* define if you have intxx_t data type */
+#undef HAVE_INTXX_T
+
+/* Define to 1 if the system has the type `in_addr_t'. */
+#undef HAVE_IN_ADDR_T
+
+/* Define to 1 if the system has the type `in_port_t'. */
+#undef HAVE_IN_PORT_T
+
+/* Define if you have isblank(3C). */
+#undef HAVE_ISBLANK
+
+/* Define to 1 if you have the `killpg' function. */
+#undef HAVE_KILLPG
+
+/* Define to 1 if you have the `krb5_cc_new_unique' function. */
+#undef HAVE_KRB5_CC_NEW_UNIQUE
+
+/* Define to 1 if you have the `krb5_free_error_message' function. */
+#undef HAVE_KRB5_FREE_ERROR_MESSAGE
+
+/* Define to 1 if you have the `krb5_get_error_message' function. */
+#undef HAVE_KRB5_GET_ERROR_MESSAGE
+
+/* Define to 1 if you have the <langinfo.h> header file. */
+#undef HAVE_LANGINFO_H
+
+/* Define to 1 if you have the <lastlog.h> header file. */
+#undef HAVE_LASTLOG_H
+
+/* Define if you want ldns support */
+#undef HAVE_LDNS
+
+/* Define to 1 if you have the <libaudit.h> header file. */
+#undef HAVE_LIBAUDIT_H
+
+/* Define to 1 if you have the `bsm' library (-lbsm). */
+#undef HAVE_LIBBSM
+
+/* Define to 1 if you have the `dl' library (-ldl). */
+#undef HAVE_LIBDL
+
+/* Define to 1 if you have the <libgen.h> header file. */
+#undef HAVE_LIBGEN_H
+
+/* Define if system has libiaf that supports set_id */
+#undef HAVE_LIBIAF
+
+/* Define to 1 if you have the `network' library (-lnetwork). */
+#undef HAVE_LIBNETWORK
+
+/* Define to 1 if you have the `pam' library (-lpam). */
+#undef HAVE_LIBPAM
+
+/* Define to 1 if you have the <libproc.h> header file. */
+#undef HAVE_LIBPROC_H
+
+/* Define to 1 if you have the `socket' library (-lsocket). */
+#undef HAVE_LIBSOCKET
+
+/* Define to 1 if you have the <libutil.h> header file. */
+#undef HAVE_LIBUTIL_H
+
+/* Define to 1 if you have the `xnet' library (-lxnet). */
+#undef HAVE_LIBXNET
+
+/* Define to 1 if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <linux/audit.h> header file. */
+#undef HAVE_LINUX_AUDIT_H
+
+/* Define to 1 if you have the <linux/filter.h> header file. */
+#undef HAVE_LINUX_FILTER_H
+
+/* Define to 1 if you have the <linux/if_tun.h> header file. */
+#undef HAVE_LINUX_IF_TUN_H
+
+/* Define to 1 if you have the <linux/seccomp.h> header file. */
+#undef HAVE_LINUX_SECCOMP_H
+
+/* Define to 1 if you have the `llabs' function. */
+#undef HAVE_LLABS
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the `localtime_r' function. */
+#undef HAVE_LOCALTIME_R
+
+/* Define to 1 if you have the `login' function. */
+#undef HAVE_LOGIN
+
+/* Define to 1 if you have the <login_cap.h> header file. */
+#undef HAVE_LOGIN_CAP_H
+
+/* Define to 1 if you have the `login_getcapbool' function. */
+#undef HAVE_LOGIN_GETCAPBOOL
+
+/* Define to 1 if you have the `login_getpwclass' function. */
+#undef HAVE_LOGIN_GETPWCLASS
+
+/* Define to 1 if you have the <login.h> header file. */
+#undef HAVE_LOGIN_H
+
+/* Define to 1 if you have the `logout' function. */
+#undef HAVE_LOGOUT
+
+/* Define to 1 if you have the `logwtmp' function. */
+#undef HAVE_LOGWTMP
+
+/* Define to 1 if the system has the type `long double'. */
+#undef HAVE_LONG_DOUBLE
+
+/* Define to 1 if the system has the type `long long'. */
+#undef HAVE_LONG_LONG
+
+/* Define to 1 if you have the <maillock.h> header file. */
+#undef HAVE_MAILLOCK_H
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+   to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the `mblen' function. */
+#undef HAVE_MBLEN
+
+/* Define to 1 if you have the `mbtowc' function. */
+#undef HAVE_MBTOWC
+
+/* Define to 1 if you have the `memmem' function. */
+#undef HAVE_MEMMEM
+
+/* Define to 1 if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define to 1 if you have the `memset_s' function. */
+#undef HAVE_MEMSET_S
+
+/* Define to 1 if you have the `mkdtemp' function. */
+#undef HAVE_MKDTEMP
+
+/* Define to 1 if you have the `mmap' function. */
+#undef HAVE_MMAP
+
+/* define if you have mode_t data type */
+#undef HAVE_MODE_T
+
+/* Some systems put nanosleep outside of libc */
+#undef HAVE_NANOSLEEP
+
+/* Define to 1 if you have the <ndir.h> header file. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the <netdb.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define to 1 if you have the <netgroup.h> header file. */
+#undef HAVE_NETGROUP_H
+
+/* Define to 1 if you have the <net/if_tun.h> header file. */
+#undef HAVE_NET_IF_TUN_H
+
+/* Define to 1 if you have the <net/route.h> header file. */
+#undef HAVE_NET_ROUTE_H
+
+/* Define if you are on NeXT */
+#undef HAVE_NEXT
+
+/* Define to 1 if the system has the type `nfds_t'. */
+#undef HAVE_NFDS_T
+
+/* Define to 1 if you have the `ngetaddrinfo' function. */
+#undef HAVE_NGETADDRINFO
+
+/* Define to 1 if you have the `nlist' function. */
+#undef HAVE_NLIST
+
+/* Define to 1 if you have the <nlist.h> header file. */
+#undef HAVE_NLIST_H
+
+/* Define to 1 if you have the `nl_langinfo' function. */
+#undef HAVE_NL_LANGINFO
+
+/* Define to 1 if you have the `nsleep' function. */
+#undef HAVE_NSLEEP
+
+/* Define to 1 if you have the `ogetaddrinfo' function. */
+#undef HAVE_OGETADDRINFO
+
+/* Define if you have an old version of PAM which takes only one argument to
+   pam_strerror */
+#undef HAVE_OLD_PAM
+
+/* Define to 1 if you have the `openlog_r' function. */
+#undef HAVE_OPENLOG_R
+
+/* Define to 1 if you have the `openpty' function. */
+#undef HAVE_OPENPTY
+
+/* Define to 1 if you have the `OpenSSL_version' function. */
+#undef HAVE_OPENSSL_VERSION
+
+/* Define to 1 if you have the `OpenSSL_version_num' function. */
+#undef HAVE_OPENSSL_VERSION_NUM
+
+/* Define if you have Digital Unix Security Integration Architecture */
+#undef HAVE_OSF_SIA
+
+/* Define to 1 if you have the `pam_getenvlist' function. */
+#undef HAVE_PAM_GETENVLIST
+
+/* Define to 1 if you have the <pam/pam_appl.h> header file. */
+#undef HAVE_PAM_PAM_APPL_H
+
+/* Define to 1 if you have the `pam_putenv' function. */
+#undef HAVE_PAM_PUTENV
+
+/* Define to 1 if you have the <paths.h> header file. */
+#undef HAVE_PATHS_H
+
+/* Define if you have ut_pid in utmp.h */
+#undef HAVE_PID_IN_UTMP
+
+/* define if you have pid_t data type */
+#undef HAVE_PID_T
+
+/* Define to 1 if you have the `pledge' function. */
+#undef HAVE_PLEDGE
+
+/* Define to 1 if you have the `poll' function. */
+#undef HAVE_POLL
+
+/* Define to 1 if you have the <poll.h> header file. */
+#undef HAVE_POLL_H
+
+/* Define to 1 if you have the `ppoll' function. */
+#undef HAVE_PPOLL
+
+/* Define to 1 if you have the `prctl' function. */
+#undef HAVE_PRCTL
+
+/* Define to 1 if you have the `priv_basicset' function. */
+#undef HAVE_PRIV_BASICSET
+
+/* Define to 1 if you have the <priv.h> header file. */
+#undef HAVE_PRIV_H
+
+/* Define to 1 if you have the `procctl' function. */
+#undef HAVE_PROCCTL
+
+/* Define if you have /proc/$pid/fd */
+#undef HAVE_PROC_PID
+
+/* Define to 1 if you have the `proc_pidinfo' function. */
+#undef HAVE_PROC_PIDINFO
+
+/* Define to 1 if you have the `pselect' function. */
+#undef HAVE_PSELECT
+
+/* Define to 1 if you have the `pstat' function. */
+#undef HAVE_PSTAT
+
+/* Define to 1 if you have the <pty.h> header file. */
+#undef HAVE_PTY_H
+
+/* Define to 1 if you have the `pututline' function. */
+#undef HAVE_PUTUTLINE
+
+/* Define to 1 if you have the `pututxline' function. */
+#undef HAVE_PUTUTXLINE
+
+/* Define to 1 if you have the `raise' function. */
+#undef HAVE_RAISE
+
+/* Define to 1 if you have the `readpassphrase' function. */
+#undef HAVE_READPASSPHRASE
+
+/* Define to 1 if you have the <readpassphrase.h> header file. */
+#undef HAVE_READPASSPHRASE_H
+
+/* Define to 1 if your system has a GNU libc compatible `realloc' function,
+   and to 0 otherwise. */
+#undef HAVE_REALLOC
+
+/* Define to 1 if you have the `reallocarray' function. */
+#undef HAVE_REALLOCARRAY
+
+/* Define to 1 if you have the `realpath' function. */
+#undef HAVE_REALPATH
+
+/* Define to 1 if you have the `recallocarray' function. */
+#undef HAVE_RECALLOCARRAY
+
+/* Define to 1 if you have the `recvmsg' function. */
+#undef HAVE_RECVMSG
+
+/* sys/resource.h has RLIMIT_NPROC */
+#undef HAVE_RLIMIT_NPROC
+
+/* Define to 1 if you have the <rpc/types.h> header file. */
+#undef HAVE_RPC_TYPES_H
+
+/* Define to 1 if you have the `rresvport_af' function. */
+#undef HAVE_RRESVPORT_AF
+
+/* Define to 1 if you have the `RSA_generate_key_ex' function. */
+#undef HAVE_RSA_GENERATE_KEY_EX
+
+/* Define to 1 if you have the `RSA_get_default_method' function. */
+#undef HAVE_RSA_GET_DEFAULT_METHOD
+
+/* Define to 1 if you have the <sandbox.h> header file. */
+#undef HAVE_SANDBOX_H
+
+/* Define to 1 if you have the `sandbox_init' function. */
+#undef HAVE_SANDBOX_INIT
+
+/* define if you have sa_family_t data type */
+#undef HAVE_SA_FAMILY_T
+
+/* Define to 1 if you have the `scan_scaled' function. */
+#undef HAVE_SCAN_SCALED
+
+/* Define if you have SecureWare-based protected password database */
+#undef HAVE_SECUREWARE
+
+/* Define to 1 if you have the <security/pam_appl.h> header file. */
+#undef HAVE_SECURITY_PAM_APPL_H
+
+/* Define to 1 if you have the `sendmsg' function. */
+#undef HAVE_SENDMSG
+
+/* Define to 1 if you have the `setauthdb' function. */
+#undef HAVE_SETAUTHDB
+
+/* Define to 1 if you have the `setdtablesize' function. */
+#undef HAVE_SETDTABLESIZE
+
+/* Define to 1 if you have the `setegid' function. */
+#undef HAVE_SETEGID
+
+/* Define to 1 if you have the `setenv' function. */
+#undef HAVE_SETENV
+
+/* Define to 1 if you have the `seteuid' function. */
+#undef HAVE_SETEUID
+
+/* Define to 1 if you have the `setgroupent' function. */
+#undef HAVE_SETGROUPENT
+
+/* Define to 1 if you have the `setgroups' function. */
+#undef HAVE_SETGROUPS
+
+/* Define to 1 if you have the `setlinebuf' function. */
+#undef HAVE_SETLINEBUF
+
+/* Define to 1 if you have the `setlogin' function. */
+#undef HAVE_SETLOGIN
+
+/* Define to 1 if you have the `setluid' function. */
+#undef HAVE_SETLUID
+
+/* Define to 1 if you have the `setpassent' function. */
+#undef HAVE_SETPASSENT
+
+/* Define to 1 if you have the `setpcred' function. */
+#undef HAVE_SETPCRED
+
+/* Define to 1 if you have the `setpflags' function. */
+#undef HAVE_SETPFLAGS
+
+/* Define to 1 if you have the `setppriv' function. */
+#undef HAVE_SETPPRIV
+
+/* Define to 1 if you have the `setproctitle' function. */
+#undef HAVE_SETPROCTITLE
+
+/* Define to 1 if you have the `setregid' function. */
+#undef HAVE_SETREGID
+
+/* Define to 1 if you have the `setresgid' function. */
+#undef HAVE_SETRESGID
+
+/* Define to 1 if you have the `setresuid' function. */
+#undef HAVE_SETRESUID
+
+/* Define to 1 if you have the `setreuid' function. */
+#undef HAVE_SETREUID
+
+/* Define to 1 if you have the `setrlimit' function. */
+#undef HAVE_SETRLIMIT
+
+/* Define to 1 if you have the `setsid' function. */
+#undef HAVE_SETSID
+
+/* Define to 1 if you have the `setutent' function. */
+#undef HAVE_SETUTENT
+
+/* Define to 1 if you have the `setutxdb' function. */
+#undef HAVE_SETUTXDB
+
+/* Define to 1 if you have the `setutxent' function. */
+#undef HAVE_SETUTXENT
+
+/* Define to 1 if you have the `setvbuf' function. */
+#undef HAVE_SETVBUF
+
+/* Define to 1 if you have the `set_id' function. */
+#undef HAVE_SET_ID
+
+/* Define to 1 if you have the `SHA256Update' function. */
+#undef HAVE_SHA256UPDATE
+
+/* Define to 1 if you have the <sha2.h> header file. */
+#undef HAVE_SHA2_H
+
+/* Define to 1 if you have the `SHA384Update' function. */
+#undef HAVE_SHA384UPDATE
+
+/* Define to 1 if you have the `SHA512Update' function. */
+#undef HAVE_SHA512UPDATE
+
+/* Define to 1 if you have the <shadow.h> header file. */
+#undef HAVE_SHADOW_H
+
+/* Define to 1 if you have the `sigaction' function. */
+#undef HAVE_SIGACTION
+
+/* Define to 1 if the system has the type `sighandler_t'. */
+#undef HAVE_SIGHANDLER_T
+
+/* Define to 1 if you have the `sigvec' function. */
+#undef HAVE_SIGVEC
+
+/* Define to 1 if the system has the type `sig_atomic_t'. */
+#undef HAVE_SIG_ATOMIC_T
+
+/* define if you have size_t data type */
+#undef HAVE_SIZE_T
+
+/* Define to 1 if you have the `snprintf' function. */
+#undef HAVE_SNPRINTF
+
+/* Define to 1 if you have the `socketpair' function. */
+#undef HAVE_SOCKETPAIR
+
+/* Have PEERCRED socket option */
+#undef HAVE_SO_PEERCRED
+
+/* define if you have ssize_t data type */
+#undef HAVE_SSIZE_T
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE_SS_FAMILY_IN_SS
+
+/* Define if you have ut_ss in utmpx.h */
+#undef HAVE_SS_IN_UTMPX
+
+/* Define to 1 if you have the `statfs' function. */
+#undef HAVE_STATFS
+
+/* Define to 1 if you have the `statvfs' function. */
+#undef HAVE_STATVFS
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#undef HAVE_STDIO_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasestr' function. */
+#undef HAVE_STRCASESTR
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the `strftime' function. */
+#undef HAVE_STRFTIME
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcat' function. */
+#undef HAVE_STRLCAT
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if you have the `strmode' function. */
+#undef HAVE_STRMODE
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
+/* Define to 1 if you have the `strnvis' function. */
+#undef HAVE_STRNVIS
+
+/* Define to 1 if you have the `strptime' function. */
+#undef HAVE_STRPTIME
+
+/* Define to 1 if you have the `strsep' function. */
+#undef HAVE_STRSEP
+
+/* Define to 1 if you have the `strsignal' function. */
+#undef HAVE_STRSIGNAL
+
+/* Define to 1 if you have the `strtoll' function. */
+#undef HAVE_STRTOLL
+
+/* Define to 1 if you have the `strtonum' function. */
+#undef HAVE_STRTONUM
+
+/* Define to 1 if you have the `strtoul' function. */
+#undef HAVE_STRTOUL
+
+/* Define to 1 if you have the `strtoull' function. */
+#undef HAVE_STRTOULL
+
+/* define if you have struct addrinfo data type */
+#undef HAVE_STRUCT_ADDRINFO
+
+/* Define to 1 if `d_type' is a member of `struct dirent'. */
+#undef HAVE_STRUCT_DIRENT_D_TYPE
+
+/* define if you have struct in6_addr data type */
+#undef HAVE_STRUCT_IN6_ADDR
+
+/* Define to 1 if `pw_change' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CHANGE
+
+/* Define to 1 if `pw_class' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CLASS
+
+/* Define to 1 if `pw_expire' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_EXPIRE
+
+/* Define to 1 if `pw_gecos' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_GECOS
+
+/* Define to 1 if `fd' is a member of `struct pollfd'. */
+#undef HAVE_STRUCT_POLLFD_FD
+
+/* define if you have struct sockaddr_in6 data type */
+#undef HAVE_STRUCT_SOCKADDR_IN6
+
+/* Define to 1 if `sin6_scope_id' is a member of `struct sockaddr_in6'. */
+#undef HAVE_STRUCT_SOCKADDR_IN6_SIN6_SCOPE_ID
+
+/* define if you have struct sockaddr_storage data type */
+#undef HAVE_STRUCT_SOCKADDR_STORAGE
+
+/* Define to 1 if `f_files' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FILES
+
+/* Define to 1 if `f_flags' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FLAGS
+
+/* Define to 1 if `st_blksize' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_BLKSIZE
+
+/* Define to 1 if `st_mtim' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIM
+
+/* Define to 1 if `st_mtime' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIME
+
+/* define if you have struct timespec */
+#undef HAVE_STRUCT_TIMESPEC
+
+/* define if you have struct timeval */
+#undef HAVE_STRUCT_TIMEVAL
+
+/* Define to 1 if you have the `sysconf' function. */
+#undef HAVE_SYSCONF
+
+/* Define if you have syslen in utmpx.h */
+#undef HAVE_SYSLEN_IN_UTMPX
+
+/* Define to 1 if you have the <sys/audit.h> header file. */
+#undef HAVE_SYS_AUDIT_H
+
+/* Define to 1 if you have the <sys/bitypes.h> header file. */
+#undef HAVE_SYS_BITYPES_H
+
+/* Define to 1 if you have the <sys/bsdtty.h> header file. */
+#undef HAVE_SYS_BSDTTY_H
+
+/* Define to 1 if you have the <sys/byteorder.h> header file. */
+#undef HAVE_SYS_BYTEORDER_H
+
+/* Define to 1 if you have the <sys/capsicum.h> header file. */
+#undef HAVE_SYS_CAPSICUM_H
+
+/* Define to 1 if you have the <sys/cdefs.h> header file. */
+#undef HAVE_SYS_CDEFS_H
+
+/* Define to 1 if you have the <sys/dir.h> header file. */
+#undef HAVE_SYS_DIR_H
+
+/* Define if your system defines sys_errlist[] */
+#undef HAVE_SYS_ERRLIST
+
+/* Define to 1 if you have the <sys/file.h> header file. */
+#undef HAVE_SYS_FILE_H
+
+/* Define to 1 if you have the <sys/label.h> header file. */
+#undef HAVE_SYS_LABEL_H
+
+/* Define to 1 if you have the <sys/mman.h> header file. */
+#undef HAVE_SYS_MMAN_H
+
+/* Define to 1 if you have the <sys/mount.h> header file. */
+#undef HAVE_SYS_MOUNT_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file. */
+#undef HAVE_SYS_NDIR_H
+
+/* Define if your system defines sys_nerr */
+#undef HAVE_SYS_NERR
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/poll.h> header file. */
+#undef HAVE_SYS_POLL_H
+
+/* Define to 1 if you have the <sys/prctl.h> header file. */
+#undef HAVE_SYS_PRCTL_H
+
+/* Define to 1 if you have the <sys/procctl.h> header file. */
+#undef HAVE_SYS_PROCCTL_H
+
+/* Define to 1 if you have the <sys/pstat.h> header file. */
+#undef HAVE_SYS_PSTAT_H
+
+/* Define to 1 if you have the <sys/ptms.h> header file. */
+#undef HAVE_SYS_PTMS_H
+
+/* Define to 1 if you have the <sys/ptrace.h> header file. */
+#undef HAVE_SYS_PTRACE_H
+
+/* Define to 1 if you have the <sys/random.h> header file. */
+#undef HAVE_SYS_RANDOM_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/statvfs.h> header file. */
+#undef HAVE_SYS_STATVFS_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/stream.h> header file. */
+#undef HAVE_SYS_STREAM_H
+
+/* Define to 1 if you have the <sys/stropts.h> header file. */
+#undef HAVE_SYS_STROPTS_H
+
+/* Define to 1 if you have the <sys/strtio.h> header file. */
+#undef HAVE_SYS_STRTIO_H
+
+/* Define to 1 if you have the <sys/sysctl.h> header file. */
+#undef HAVE_SYS_SYSCTL_H
+
+/* Force use of sys/syslog.h on Ultrix */
+#undef HAVE_SYS_SYSLOG_H
+
+/* Define to 1 if you have the <sys/sysmacros.h> header file. */
+#undef HAVE_SYS_SYSMACROS_H
+
+/* Define to 1 if you have the <sys/timers.h> header file. */
+#undef HAVE_SYS_TIMERS_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/un.h> header file. */
+#undef HAVE_SYS_UN_H
+
+/* Define to 1 if you have the <sys/vfs.h> header file. */
+#undef HAVE_SYS_VFS_H
+
+/* Define to 1 if you have the `tcgetpgrp' function. */
+#undef HAVE_TCGETPGRP
+
+/* Define to 1 if you have the `tcsendbreak' function. */
+#undef HAVE_TCSENDBREAK
+
+/* Define to 1 if you have the `time' function. */
+#undef HAVE_TIME
+
+/* Define to 1 if you have the `timegm' function. */
+#undef HAVE_TIMEGM
+
+/* Define to 1 if you have the <time.h> header file. */
+#undef HAVE_TIME_H
+
+/* Define if you have ut_time in utmp.h */
+#undef HAVE_TIME_IN_UTMP
+
+/* Define if you have ut_time in utmpx.h */
+#undef HAVE_TIME_IN_UTMPX
+
+/* Define to 1 if you have the `timingsafe_bcmp' function. */
+#undef HAVE_TIMINGSAFE_BCMP
+
+/* Define to 1 if you have the <tmpdir.h> header file. */
+#undef HAVE_TMPDIR_H
+
+/* Define to 1 if you have the `truncate' function. */
+#undef HAVE_TRUNCATE
+
+/* Define to 1 if you have the <ttyent.h> header file. */
+#undef HAVE_TTYENT_H
+
+/* Define if you have ut_tv in utmp.h */
+#undef HAVE_TV_IN_UTMP
+
+/* Define if you have ut_tv in utmpx.h */
+#undef HAVE_TV_IN_UTMPX
+
+/* Define if you have ut_type in utmp.h */
+#undef HAVE_TYPE_IN_UTMP
+
+/* Define if you have ut_type in utmpx.h */
+#undef HAVE_TYPE_IN_UTMPX
+
+/* Define to 1 if you have the <ucred.h> header file. */
+#undef HAVE_UCRED_H
+
+/* Define to 1 if the system has the type `uintmax_t'. */
+#undef HAVE_UINTMAX_T
+
+/* define if you have uintxx_t data type */
+#undef HAVE_UINTXX_T
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `unlinkat' function. */
+#undef HAVE_UNLINKAT
+
+/* Define to 1 if you have the `unsetenv' function. */
+#undef HAVE_UNSETENV
+
+/* Define to 1 if the system has the type `unsigned long long'. */
+#undef HAVE_UNSIGNED_LONG_LONG
+
+/* Define to 1 if you have the `unveil' function. */
+#undef HAVE_UNVEIL
+
+/* Define to 1 if you have the `updwtmp' function. */
+#undef HAVE_UPDWTMP
+
+/* Define to 1 if you have the `updwtmpx' function. */
+#undef HAVE_UPDWTMPX
+
+/* Define to 1 if you have the <usersec.h> header file. */
+#undef HAVE_USERSEC_H
+
+/* Define to 1 if you have the `user_from_uid' function. */
+#undef HAVE_USER_FROM_UID
+
+/* Define to 1 if you have the `usleep' function. */
+#undef HAVE_USLEEP
+
+/* Define to 1 if you have the <util.h> header file. */
+#undef HAVE_UTIL_H
+
+/* Define to 1 if you have the `utimensat' function. */
+#undef HAVE_UTIMENSAT
+
+/* Define to 1 if you have the `utimes' function. */
+#undef HAVE_UTIMES
+
+/* Define to 1 if you have the <utime.h> header file. */
+#undef HAVE_UTIME_H
+
+/* Define to 1 if you have the `utmpname' function. */
+#undef HAVE_UTMPNAME
+
+/* Define to 1 if you have the `utmpxname' function. */
+#undef HAVE_UTMPXNAME
+
+/* Define to 1 if you have the <utmpx.h> header file. */
+#undef HAVE_UTMPX_H
+
+/* Define to 1 if you have the <utmp.h> header file. */
+#undef HAVE_UTMP_H
+
+/* define if you have u_char data type */
+#undef HAVE_U_CHAR
+
+/* define if you have u_int data type */
+#undef HAVE_U_INT
+
+/* define if you have u_int64_t data type */
+#undef HAVE_U_INT64_T
+
+/* define if you have u_intxx_t data type */
+#undef HAVE_U_INTXX_T
+
+/* Define to 1 if you have the `vasprintf' function. */
+#undef HAVE_VASPRINTF
+
+/* Define if va_copy exists */
+#undef HAVE_VA_COPY
+
+/* Define to 1 if you have the <vis.h> header file. */
+#undef HAVE_VIS_H
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#undef HAVE_VSNPRINTF
+
+/* Define to 1 if you have the `waitpid' function. */
+#undef HAVE_WAITPID
+
+/* Define to 1 if you have the `warn' function. */
+#undef HAVE_WARN
+
+/* Define to 1 if you have the <wchar.h> header file. */
+#undef HAVE_WCHAR_H
+
+/* Define to 1 if you have the `wcwidth' function. */
+#undef HAVE_WCWIDTH
+
+/* Define to 1 if you have the `_getlong' function. */
+#undef HAVE__GETLONG
+
+/* Define to 1 if you have the `_getpty' function. */
+#undef HAVE__GETPTY
+
+/* Define to 1 if you have the `_getshort' function. */
+#undef HAVE__GETSHORT
+
+/* Define if you have struct __res_state _res as an extern */
+#undef HAVE__RES_EXTERN
+
+/* Define to 1 if you have the `__b64_ntop' function. */
+#undef HAVE___B64_NTOP
+
+/* Define to 1 if you have the `__b64_pton' function. */
+#undef HAVE___B64_PTON
+
+/* Define if compiler implements __FUNCTION__ */
+#undef HAVE___FUNCTION__
+
+/* Define if libc defines __progname */
+#undef HAVE___PROGNAME
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE___SS_FAMILY_IN_SS
+
+/* Define if __va_copy exists */
+#undef HAVE___VA_COPY
+
+/* Define if compiler implements __func__ */
+#undef HAVE___func__
+
+/* Define this if you are using the Heimdal version of Kerberos V5 */
+#undef HEIMDAL
+
+/* Define if you need to use IP address instead of hostname in $DISPLAY */
+#undef IPADDR_IN_DISPLAY
+
+/* Detect IPv4 in IPv6 mapped addresses and treat as IPv4 */
+#undef IPV4_IN_IPV6
+
+/* Define if your system choked on IP TOS setting */
+#undef IP_TOS_IS_BROKEN
+
+/* Define if you want Kerberos 5 support */
+#undef KRB5
+
+/* Define if pututxline updates lastlog too */
+#undef LASTLOG_WRITE_PUTUTXLINE
+
+/* Define to whatever link() returns for "not supported" if it doesn't return
+   EOPNOTSUPP. */
+#undef LINK_OPNOTSUPP_ERRNO
+
+/* Lock all memory to protect sshd against Linux kcompactd */
+#undef LINUX_MEMLOCK_ONFAULT
+
+/* Adjust Linux out-of-memory killer */
+#undef LINUX_OOM_ADJUST
+
+/* max value of long long calculated by configure */
+#undef LLONG_MAX
+
+/* min value of long long calculated by configure */
+#undef LLONG_MIN
+
+/* Account locked with pw(1) */
+#undef LOCKED_PASSWD_PREFIX
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_STRING
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_SUBSTR
+
+/* Some systems need a utmpx entry for /bin/login to work */
+#undef LOGIN_NEEDS_UTMPX
+
+/* Set this to your mail directory if you do not have _PATH_MAILDIR */
+#undef MAIL_DIRECTORY
+
+/* Define if your compiler lacks __builtin_popcount */
+#undef MISSING_BUILTIN_POPCOUNT
+
+/* Need setpgrp to for controlling tty */
+#undef NEED_SETPGRP
+
+/* compiler does not accept __attribute__ on prototype args */
+#undef NO_ATTRIBUTE_ON_PROTOTYPE_ARGS
+
+/* compiler does not accept __attribute__ on return types */
+#undef NO_ATTRIBUTE_ON_RETURN_TYPE
+
+/* SA_RESTARTed signals do no interrupt select */
+#undef NO_SA_RESTART
+
+/* Define to disable UID restoration test */
+#undef NO_UID_RESTORATION_TEST
+
+/* Define if X11 doesn't support AF_UNIX sockets on that system */
+#undef NO_X11_UNIX_SOCKETS
+
+/* Define if EVP_DigestUpdate returns void */
+#undef OPENSSL_EVP_DIGESTUPDATE_VOID
+
+/* OpenSSL has ECC */
+#undef OPENSSL_HAS_ECC
+
+/* libcrypto has ed25519 support */
+#undef OPENSSL_HAS_ED25519
+
+/* libcrypto has NID_X9_62_prime256v1 */
+#undef OPENSSL_HAS_NISTP256
+
+/* libcrypto has NID_secp384r1 */
+#undef OPENSSL_HAS_NISTP384
+
+/* libcrypto has NID_secp521r1 */
+#undef OPENSSL_HAS_NISTP521
+
+/* libcrypto is missing AES 192 and 256 bit functions */
+#undef OPENSSL_LOBOTOMISED_AES
+
+/* Define if you want the OpenSSL internally seeded PRNG only */
+#undef OPENSSL_PRNG_ONLY
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define if you are using Solaris-derived PAM which passes pam_messages to
+   the conversation function with an extra level of indirection */
+#undef PAM_SUN_CODEBASE
+
+/* Work around problematic Linux PAM modules handling of PAM_TTY */
+#undef PAM_TTY_KLUDGE
+
+/* must supply username to passwd */
+#undef PASSWD_NEEDS_USERNAME
+
+/* System dirs owned by bin (uid 2) */
+#undef PLATFORM_SYS_DIR_UID
+
+/* need inet in pledge for setsockopt IP_TOS */
+#undef PLEDGE_EXTRA_INET
+
+/* Define if poll 2nd arg is ulong */
+#undef POLL_NFDS_T_ULONG
+
+/* Port number of PRNGD/EGD random number socket */
+#undef PRNGD_PORT
+
+/* Location of PRNGD/EGD random number socket */
+#undef PRNGD_SOCKET
+
+/* read(1) can return 0 for a non-closed fd */
+#undef PTY_ZEROREAD
+
+/* Sandbox using capsicum */
+#undef SANDBOX_CAPSICUM
+
+/* Sandbox using Darwin sandbox_init(3) */
+#undef SANDBOX_DARWIN
+
+/* no privsep sandboxing */
+#undef SANDBOX_NULL
+
+/* Sandbox using setrlimit(2) */
+#undef SANDBOX_RLIMIT
+
+/* Sandbox using seccomp filter */
+#undef SANDBOX_SECCOMP_FILTER
+
+/* setrlimit RLIMIT_FSIZE works */
+#undef SANDBOX_SKIP_RLIMIT_FSIZE
+
+/* define if setrlimit RLIMIT_NOFILE breaks things */
+#undef SANDBOX_SKIP_RLIMIT_NOFILE
+
+/* Sandbox using Solaris/Illumos privileges */
+#undef SANDBOX_SOLARIS
+
+/* Specify the system call convention in use */
+#undef SECCOMP_AUDIT_ARCH
+
+/* Define if your platform breaks doing a seteuid before a setuid */
+#undef SETEUID_BREAKS_SETUID
+
+/* The size of `int', as computed by sizeof. */
+#undef SIZEOF_INT
+
+/* The size of `long int', as computed by sizeof. */
+#undef SIZEOF_LONG_INT
+
+/* The size of `long long int', as computed by sizeof. */
+#undef SIZEOF_LONG_LONG_INT
+
+/* The size of `short int', as computed by sizeof. */
+#undef SIZEOF_SHORT_INT
+
+/* The size of `time_t', as computed by sizeof. */
+#undef SIZEOF_TIME_T
+
+/* Define as const if snprintf() can declare const char *fmt */
+#undef SNPRINTF_CONST
+
+/* sockaddr_in has sin_len */
+#undef SOCK_HAS_LEN
+
+/* Define to a Set Process Title type if your system is supported by
+   bsd-setproctitle.c */
+#undef SPT_TYPE
+
+/* Define if sshd somehow reacquires a controlling TTY after setsid() */
+#undef SSHD_ACQUIRES_CTTY
+
+/* sshd PAM service name */
+#undef SSHD_PAM_SERVICE
+
+/* Use audit debugging module */
+#undef SSH_AUDIT_EVENTS
+
+/* Windows is sensitive to read buffer size */
+#undef SSH_IOBUFSZ
+
+/* non-privileged user for privilege separation */
+#undef SSH_PRIVSEP_USER
+
+/* Use tunnel device compatibility to OpenBSD */
+#undef SSH_TUN_COMPAT_AF
+
+/* Open tunnel devices the FreeBSD way */
+#undef SSH_TUN_FREEBSD
+
+/* Open tunnel devices the Linux tun/tap way */
+#undef SSH_TUN_LINUX
+
+/* No layer 2 tunnel support */
+#undef SSH_TUN_NO_L2
+
+/* Open tunnel devices the OpenBSD way */
+#undef SSH_TUN_OPENBSD
+
+/* Prepend the address family to IP tunnel traffic */
+#undef SSH_TUN_PREPEND_AF
+
+/* Define to 1 if all of the C90 standard headers exist (not just the ones
+   required in a freestanding environment). This macro is provided for
+   backward compatibility; new code need not use it. */
+#undef STDC_HEADERS
+
+/* Define if you want a different $PATH for the superuser */
+#undef SUPERUSER_PATH
+
+/* syslog_r function is safe to use in in a signal handler */
+#undef SYSLOG_R_SAFE_IN_SIGHAND
+
+/* Have sshd notify systemd on start/reload */
+#undef SYSTEMD_NOTIFY
+
+/* Support routing domains using Linux VRF */
+#undef SYS_RDOMAIN_LINUX
+
+/* Support passwords > 8 chars */
+#undef UNIXWARE_LONG_PASSWORDS
+
+/* Specify default $PATH */
+#undef USER_PATH
+
+/* Define this if you want to use libkafs' AFS support */
+#undef USE_AFS
+
+/* Use BSM audit module */
+#undef USE_BSM_AUDIT
+
+/* Use btmp to log bad logins */
+#undef USE_BTMP
+
+/* Use libedit for sftp */
+#undef USE_LIBEDIT
+
+/* Use Linux audit module */
+#undef USE_LINUX_AUDIT
+
+/* Enable OpenSSL engine support */
+#undef USE_OPENSSL_ENGINE
+
+/* Define if you want to enable PAM support */
+#undef USE_PAM
+
+/* Use PIPES instead of a socketpair() */
+#undef USE_PIPES
+
+/* Define if you have Solaris privileges */
+#undef USE_SOLARIS_PRIVS
+
+/* Define if you have Solaris process contracts */
+#undef USE_SOLARIS_PROCESS_CONTRACTS
+
+/* Define if you have Solaris projects */
+#undef USE_SOLARIS_PROJECTS
+
+/* Use libwtmpdb for sshd */
+#undef USE_WTMPDB
+
+/* compiler variable declarations after code */
+#undef VARIABLE_DECLARATION_AFTER_CODE
+
+/* compiler supports variable length arrays */
+#undef VARIABLE_LENGTH_ARRAYS
+
+/* Define if you shouldn't strip 'tty' from your ttyname in [uw]tmp */
+#undef WITH_ABBREV_NO_TTY
+
+/* Define if you want to enable AIX4's authenticate function */
+#undef WITH_AIXAUTHENTICATE
+
+/* Define if you have/want arrays (cluster-wide session management, not C
+   arrays) */
+#undef WITH_IRIX_ARRAY
+
+/* Define if you want IRIX audit trails */
+#undef WITH_IRIX_AUDIT
+
+/* Define if you want IRIX kernel jobs */
+#undef WITH_IRIX_JOBS
+
+/* Define if you want IRIX project management */
+#undef WITH_IRIX_PROJECT
+
+/* use libcrypto for cryptography */
+#undef WITH_OPENSSL
+
+/* Define if you want SELinux support. */
+#undef WITH_SELINUX
+
+/* Enable zlib */
+#undef WITH_ZLIB
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+#  define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+#  undef WORDS_BIGENDIAN
+# endif
+#endif
+
+/* Define if xauth is found in your path */
+#undef XAUTH_PATH
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* log for bad login attempts */
+#undef _PATH_BTMP
+
+/* Full path of your "passwd" program */
+#undef _PATH_PASSWD_PROG
+
+/* Specify location of ssh.pid */
+#undef _PATH_SSH_PIDDIR
+
+/* Define if we don't have struct __res_state in resolv.h */
+#undef __res_state
+
+/* Define to rpl_calloc if the replacement function should be used. */
+#undef calloc
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
+
+/* Define to rpl_realloc if the replacement function should be used. */
+#undef realloc
+
+/* type to use in place of socklen_t if not defined */
+#undef socklen_t
--- a/configure~	1970-01-01 04:00:00.000000000 +0400
+++ b/configure~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,28438 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.71 for OpenSSH Portable.
+#
+# Report bugs to <openssh-unix-dev@mindrot.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
+# Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
+if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else $as_nop
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+
+# Reset variables that may have inherited troublesome values from
+# the environment.
+
+# IFS needs to be set, to space, tab, and newline, in precisely that order.
+# (If _AS_PATH_WALK were called with IFS unset, it would have the
+# side effect of setting IFS to empty, thus disabling word splitting.)
+# Quoting is to prevent editors from complaining about space-tab.
+as_nl='
+'
+export as_nl
+IFS=" ""	$as_nl"
+
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# Ensure predictable behavior from utilities with locale-dependent output.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# We cannot yet rely on "unset" to work, but we need these variables
+# to be unset--not just set to an empty or harmless value--now, to
+# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh).  This construct
+# also avoids known problems related to "unset" and subshell syntax
+# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
+for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
+do eval test \${$as_var+y} \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+
+# Ensure that fds 0, 1, and 2 are open.
+if (exec 3>&0) 2>/dev/null; then :; else exec 0</dev/null; fi
+if (exec 3>&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
+if (exec 3>&2)            ; then :; else exec 2>/dev/null; fi
+
+# The user is always right.
+if ${PATH_SEPARATOR+false} :; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    test -r "$as_dir$0" && as_myself=$as_dir$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="as_nop=:
+if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else \$as_nop
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" )
+then :
+
+else \$as_nop
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+blah=\$(echo \$(echo blah))
+test x\"\$blah\" = xblah || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null
+then :
+  as_have_required=yes
+else $as_nop
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null
+then :
+
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null
+then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+IFS=$as_save_IFS
+if $as_found
+then :
+
+else $as_nop
+  if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi
+fi
+
+
+      if test "x$CONFIG_SHELL" != x
+then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno
+then :
+  printf "%s\n" "$0: This script requires a shell more modern than all"
+  printf "%s\n" "$0: the shells that I found on your system."
+  if test ${ZSH_VERSION+y} ; then
+    printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and
+$0: openssh-unix-dev@mindrot.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
+then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else $as_nop
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
+then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else $as_nop
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  printf "%s\n" "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+# Determine whether it's possible to make 'echo' print without a newline.
+# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
+# for compatibility with existing Makefiles.
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+# For backward compatibility with old third-party macros, we provide
+# the shell variables $as_echo and $as_echo_n.  New code should use
+# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
+as_echo='printf %s\n'
+as_echo_n='printf %s'
+
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='OpenSSH'
+PACKAGE_TARNAME='openssh'
+PACKAGE_VERSION='Portable'
+PACKAGE_STRING='OpenSSH Portable'
+PACKAGE_BUGREPORT='openssh-unix-dev@mindrot.org'
+PACKAGE_URL=''
+
+ac_unique_file="ssh.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stddef.h>
+#ifdef HAVE_STDIO_H
+# include <stdio.h>
+#endif
+#ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+#ifdef HAVE_STRING_H
+# include <string.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_header_c_list=
+ac_subst_vars='LTLIBOBJS
+COMPATINCLUDES
+CFLAGS_NOPIE
+LDFLAGS_NOPIE
+TMUX
+DROPBEARCONVERT
+DROPBEARKEY
+DBCLIENT
+DROPBEAR
+CONCH
+PUTTYGEN
+PLINK
+DEPEND
+UNSUPPORTED_ALGORITHMS
+TEST_MALLOC_OPTIONS
+TEST_SSH_UTF8
+TEST_SSH_IPV6
+piddir
+user_path
+mansubdir
+MANTYPE
+XAUTH_PATH
+STRIP_OPT
+xauth_path
+PRIVSEP_PATH
+CHANNELLIBS
+K5LIBS
+GSSLIBS
+KRB5CONF
+SSHDLIBS
+SSH_PRIVSEP_USER
+SK_STANDALONE
+LIBFIDO2
+SK_DUMMY_LIBRARY
+OPENSSL_BIN
+openssl_bin
+PICFLAG
+LIBWTMPDB
+LIBEDIT
+LDNSCONFIG
+LIBOBJS
+TESTLIBS
+LD
+PATH_PASSWD_PROG
+STARTUP_SCRIPT_SHELL
+MAKE_PACKAGE_SUPPORTED
+PATH_USERADD_PROG
+PATH_GROUPADD_PROG
+MANFMT
+TEST_SHELL
+PKGCONFIG
+MANDOC
+NROFF
+GROFF
+SH
+TEST_MINUS_S_SH
+SED
+KILL
+CAT
+ac_ct_AR
+AR
+MKDIR_P
+EGREP
+GREP
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+RANLIB
+CPP
+AWK
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+runstatedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_largefile
+with_openssl
+with_stackprotect
+with_hardening
+with_retpoline
+with_rpath
+with_cflags
+with_cflags_after
+with_cppflags
+with_ldflags
+with_ldflags_after
+with_libs
+with_Werror
+with_linux_memlock_onfault
+with_solaris_contracts
+with_solaris_projects
+with_solaris_privs
+with_osfsia
+with_zlib
+with_zlib_version_check
+with_ldns
+with_libedit
+with_wtmpdb
+with_audit
+with_pie
+enable_pkcs11
+enable_security_key
+with_security_key_builtin
+with_security_key_standalone
+with_ssl_dir
+with_openssl_header_check
+with_ssl_engine
+with_prngd_port
+with_prngd_socket
+with_pam
+with_pam_service
+with_privsep_user
+with_sandbox
+with_selinux
+with_kerberos5
+with_privsep_path
+with_xauth
+enable_strip
+with_maildir
+with_mantype
+with_shadow
+with_ipaddr_display
+enable_etc_default_login
+with_default_path
+with_superuser_path
+with_4in6
+with_bsd_auth
+with_pid_dir
+enable_fd_passing
+enable_lastlog
+enable_utmp
+enable_utmpx
+enable_wtmp
+enable_wtmpx
+enable_libutil
+enable_pututline
+enable_pututxline
+with_lastlog
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir runstatedir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures OpenSSH Portable to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/openssh]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of OpenSSH Portable:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-largefile     omit support for large files
+  --disable-pkcs11        disable PKCS#11 support code [no]
+  --disable-security-key  disable U2F/FIDO support code no
+  --disable-strip         Disable calling strip(1) on install
+  --disable-etc-default-login Disable using PATH from /etc/default/login no
+  --disable-fd-passing    disable file descriptor passsing no
+  --disable-lastlog       disable use of lastlog even if detected no
+  --disable-utmp          disable use of utmp even if detected no
+  --disable-utmpx         disable use of utmpx even if detected no
+  --disable-wtmp          disable use of wtmp even if detected no
+  --disable-wtmpx         disable use of wtmpx even if detected no
+  --disable-libutil       disable use of libutil (login() etc.) no
+  --disable-pututline     disable use of pututline() etc. (uwtmp) no
+  --disable-pututxline    disable use of pututxline() etc. (uwtmpx) no
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --without-openssl       Disable use of OpenSSL; use only limited internal crypto **EXPERIMENTAL**
+  --without-stackprotect  Don't use compiler's stack protection
+  --without-hardening     Don't use toolchain hardening flags
+  --without-retpoline     Enable retpoline spectre mitigation
+  --without-rpath         Disable auto-added -R linker paths
+  --with-cflags           Specify additional flags to pass to compiler
+  --with-cflags-after     Specify additional flags to pass to compiler after configure
+  --with-cppflags         Specify additional flags to pass to preprocessor
+  --with-ldflags          Specify additional flags to pass to linker
+  --with-ldflags-after    Specify additional flags to pass to linker after configure
+  --with-libs             Specify additional libraries to link with
+  --with-Werror           Build main code with -Werror
+  --with-linux-memlock-onfault Enables memory locking on Linux
+  --with-solaris-contracts Enable Solaris process contracts (experimental)
+  --with-solaris-projects Enable Solaris projects (experimental)
+  --with-solaris-privs    Enable Solaris/Illumos privileges (experimental)
+  --with-osfsia           Enable Digital Unix SIA
+  --with-zlib=PATH        Use zlib in PATH
+  --without-zlib-version-check Disable zlib version check
+  --with-ldns[=PATH]      Use ldns for DNSSEC support (optionally in PATH)
+  --with-libedit[=PATH]   Enable libedit support for sftp
+  --with-wtmpdb[=PATH]   Enable wtmpdb support for sshd
+  --with-audit=module     Enable audit support (modules=debug,bsm,linux)
+  --with-pie              Build Position Independent Executables if possible
+  --with-security-key-builtin include builtin U2F/FIDO support
+  --with-security-key-standalone build standalone sk-libfido2 SecurityKeyProvider
+  --with-ssl-dir=PATH     Specify path to OpenSSL installation
+  --without-openssl-header-check Disable OpenSSL version consistency check
+  --with-ssl-engine       Enable OpenSSL (hardware) ENGINE support
+  --with-prngd-port=PORT  read entropy from PRNGD/EGD TCP localhost:PORT
+  --with-prngd-socket=FILE read entropy from PRNGD/EGD socket FILE (default=/var/run/egd-pool)
+  --with-pam              Enable PAM support
+  --with-pam-service=name Specify PAM service name
+  --with-privsep-user=user Specify non-privileged user for privilege separation
+  --with-sandbox=style    Specify privilege separation sandbox (no, capsicum, darwin, rlimit, seccomp_filter)
+  --with-selinux          Enable SELinux support
+  --with-kerberos5=PATH   Enable Kerberos 5 support
+  --with-privsep-path=xxx Path for privilege separation chroot (default=/var/empty)
+  --with-xauth=PATH       Specify path to xauth program
+  --with-maildir=/path/to/mail    Specify your system mail directory
+  --with-mantype=man|cat|doc  Set man page type
+  --without-shadow        Disable shadow password support
+  --with-ipaddr-display   Use ip address instead of hostname in $DISPLAY
+  --with-default-path=    Specify default $PATH environment for server
+  --with-superuser-path=  Specify different path for super-user
+  --with-4in6             Check for and convert IPv4 in IPv6 mapped addresses
+  --with-bsd-auth         Enable BSD auth support
+  --with-pid-dir=PATH     Specify location of sshd.pid file
+  --with-lastlog=FILE|DIR specify lastlog location common locations
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <openssh-unix-dev@mindrot.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for configure.gnu first; this name is used for a wrapper for
+    # Metaconfig's "Configure" on case-insensitive file systems.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+OpenSSH configure Portable
+generated by GNU Autoconf 2.71
+
+Copyright (C) 2021 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest.beam
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to run conftest.$ac_ext, and return whether this succeeded. Assumes that
+# executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: program exited with status $ac_status" >&5
+       printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as

[truncated 732905 bytes]

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1 (local metadata check)

Local metadata consistency check

## Refinement Pass 1

You are refining a fixer patch after an explicit code review.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Read the latest author response at `./patch-output.txt`. Read the review report at `./review-1-output.txt`. This is refinement round 1. The original pre-edit snapshot is available at `./source` if you need to compare the current patch against it. Re-read the planning pass at `./plan-output.txt` before editing. The workspace currently changes these repo-relative paths: aclocal.m4, config.h.in, configure, regress/authorized_keys_root, regress/check-perm, regress/data, regress/ecdsa-sha2-nistp256, regress/ecdsa-sha2-nistp256.pub, regress/ecdsa-sha2-nistp384, regress/ecdsa-sha2-nistp384.pub, regress/ecdsa-sha2-nistp521, regress/ecdsa-sha2-nistp521.pub, regress/failed-regress.log, regress/failed-ssh.log, regress/failed-sshd.log, regress/host.ecdsa-sha2-nistp256, regress/host.ecdsa-sha2-nistp384, regress/host.ecdsa-sha2-nistp521, regress/host.sk-ecdsa-sha2-nistp256@openssh.com, regress/host.sk-ssh-ed25519@openssh.com, regress/host.ssh-ed25519, regress/host.ssh-rsa, regress/known_hosts, regress/log/20260510T065104.927573.ssh.346.log, regress/mkdtemp, regress/modpipe, regress/netcat, regress/regress.log, regress/rsa_ssh2_cr.prv, regress/rsa_ssh2_crnl.prv, regress/setuid-allowed, regress/sk-ecdsa-sha2-nistp256@openssh.com, regress/sk-ecdsa-sha2-nistp256@openssh.com.pub, regress/sk-ssh-ed25519@openssh.com, regress/sk-ssh-ed25519@openssh.com.pub, regress/ssh-ed25519, regress/ssh-ed25519.pub, regress/ssh-log-wrapper.sh, regress/ssh-rsa, regress/ssh-rsa.pub, regress/ssh.log, regress/ssh_config, regress/ssh_proxy, regress/sshd-log-wrapper.sh, regress/sshd.log, regress/sshd_config, regress/sshd_proxy, regress/t10.out.pub, regress/t12.out.pub, regress/t7.out.pub, regress/t9.out.pub, regress/timestamp. Either keep that exact set synchronized with `## Git Add Paths` and `## Issue Connection`, or revert any unintended file before you answer.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`, `make` and, if available, `make check`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. Address the review findings with the smallest reasonable follow-up changes. If the review identifies a runtime or correctness bug in the changed code, you must update the code itself before answering; a metadata-only response is not sufficient. Keep the patch upstream-friendly, use local project helpers and compat APIs when available, avoid awkward control flow when a simpler structure will do, keep the final response gittable, make the maintainer-facing explanation plain and direct, keep `## Evidence Confidence` honest, add short comments for any non-obvious translation or remapping logic, run relevant project-level build/tests from the workspace root before narrower checks when possible, try a bounded independent reproduction command/test if the review or plan shows one is safe, and summarize which review findings you addressed.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mentio

[truncated 4236 bytes]

Response

## Plan Pass

## Problem

Fixer observed an `sshd-session: gis [priv]` process during a runaway-process investigation, but the bundled evidence shows it sleeping in `poll`/`restart_syscall` with `wchan=poll_schedule_timeout.constprop.0`, one strace line over 5 seconds, and only `0.3%` total CPU across sampled `sshd-session` processes. The hot kernel symbols are indirect memory-management samples, not a symbolized OpenSSH userspace loop.

## Evidence Confidence

inferred

## Proposed Subject

No source patch yet: diagnose as insufficient evidence for an upstream OpenSSH code change, and collect a symbolized, process-specific reproduction before editing.

## Patch Plan

Do not edit files in this pass. The evidence does not establish a concrete OpenSSH bug: `server_loop2()` intentionally blocks in `ppoll()` using local `ptimeout_*` helpers, and `monitor_read()` intentionally blocks in `poll(..., -1)` waiting for monitor/log fds.

If later evidence proves a real busy loop, scope any patch to the confirmed loop in `serverloop.c` or `monitor.c`, preserving OpenSSH conventions: `ssh_signal()`, `fatal_f`/`error_f`/`debug_f`, `xmalloc` allocation helpers, `atomicio` for robust fd IO, and existing `ptimeout_*` timeout handling. Avoid awkward `goto`; prefer bounded `continue`/`return` paths matching nearby code.

No prior Fixer patch exists in this workspace to improve or replace. Debian patches touch `sshd-session.c` for GSSAPI, SELinux, TCP wrappers, and config paths, but none explain the observed poll sleep.

## Risks

A speculative source patch would likely add churn to security-sensitive privsep/session code without fixing a demonstrated defect.

Adding timeouts or wakeups around monitor/session polling without a reproduced condition risks breaking valid long-lived idle SSH sessions.

## Validation

Before any future focused compile, try the project entrypoint from the workspace root:

```sh
./configure && make
```

If that fails, record the exact configure/build failure and then use the narrowest reproducible compile target.

Bounded independent evidence attempt before editing: after a successful build, run:

```sh
make tests LTESTS=connect-privsep
```

and, if safe in the test harness, sample the spawned `sshd-session` with `strace -ttT -p <pid>`/`gdb bt` or equivalent to see whether it actually spins. Do not claim `reproduced` unless this shows repeated userspace activity or sustained CPU attributable to OpenSSH rather than an idle `poll`.

## Patch Pass

Subject: no patch: require stronger sshd-session loop evidence

## Commit Message
No source change is proposed. The collected perf, strace, and `/proc` evidence points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace busy loop. A speculative timeout or wakeup change in the server event loop would risk changing valid idle SSH session behavior without addressing a demonstrated bug.

## Evidence Confidence
inferred

## Issue Connection
The collected signal was a Fixer runaway-process investigation for `sshd-session: gis [priv]`, with a backtrace through libc `poll`, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, one `restart_syscall` line over a 5 second strace, and only `0.3%` total CPU across sampled `sshd-session` processes.

The cautious code-level inference is that this sampled a normal blocking wait in OpenSSH’s privilege separation design. “Privilege separation” means OpenSSH keeps a privileged monitor process around for operations requiring root; nearby code intentionally waits in `monitor_read()` with `poll(..., -1)` for monitor/log fds, while the post-auth session loop waits in `ppoll()` using the local `ptimeout_*` helpers.

I made no source change, following the saved plan, because the evidence is profiler/trace evidence without a reproducible OpenSSH failure. Local conventions inspected include `README.md`, `README.privsep`, `regress/README.regress`, `ssh_signal()`, `fatal_f`/`error_f`/`debug_f`, `xmalloc`, `atomicio`, and the `ptimeout_*` helpers. No new helper was needed because there is no patch.

The expected effect is to avoid landing an upstream-hostile speculative change until there is symbolized or reproducible evidence of an actual busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed immediately from the workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

After that generated-file blocker, I ran `autoreconf && ./configure && make sshd-session`; it completed and linked `sshd-session`.

For an independent reproduction attempt, I ran `make tests LTESTS=connect-privsep`. It built the needed test binaries but failed before exercising the privsep session: `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

I also ran `./sshd-session`, which exited with `sshd-session should not be executed directly`; this confirms it is not a valid standalone reproducer. No command reproduced sustained CPU use or a userspace loop.

## Review Pass 1 (local metadata check)

RESULT: fix-needed

## Findings
1. Patch metadata drift: the workspace currently changes `aclocal.m4`, `config.h.in`, `configure`, `regress/authorized_keys_root`, `regress/check-perm`, `regress/data`, `regress/ecdsa-sha2-nistp256`, `regress/ecdsa-sha2-nistp256.pub`, `regress/ecdsa-sha2-nistp384`, `regress/ecdsa-sha2-nistp384.pub`, `regress/ecdsa-sha2-nistp521`, `regress/ecdsa-sha2-nistp521.pub`, `regress/failed-regress.log`, `regress/failed-ssh.log`, `regress/failed-sshd.log`, `regress/host.ecdsa-sha2-nistp256`, `regress/host.ecdsa-sha2-nistp384`, `regress/host.ecdsa-sha2-nistp521`, `regress/host.sk-ecdsa-sha2-nistp256@openssh.com`, `regress/host.sk-ssh-ed25519@openssh.com`, `regress/host.ssh-ed25519`, `regress/host.ssh-rsa`, `regress/known_hosts`, `regress/log/20260510T065104.927573.ssh.346.log`, `regress/mkdtemp`, `regress/modpipe`, `regress/netcat`, `regress/regress.log`, `regress/rsa_ssh2_cr.prv`, `regress/rsa_ssh2_crnl.prv`, `regress/setuid-allowed`, `regress/sk-ecdsa-sha2-nistp256@openssh.com`, `regress/sk-ecdsa-sha2-nistp256@openssh.com.pub`, `regress/sk-ssh-ed25519@openssh.com`, `regress/sk-ssh-ed25519@openssh.com.pub`, `regress/ssh-ed25519`, `regress/ssh-ed25519.pub`, `regress/ssh-log-wrapper.sh`, `regress/ssh-rsa`, `regress/ssh-rsa.pub`, `regress/ssh.log`, `regress/ssh_config`, `regress/ssh_proxy`, `regress/sshd-log-wrapper.sh`, `regress/sshd.log`, `regress/sshd_config`, `regress/sshd_proxy`, `regress/t10.out.pub`, `regress/t12.out.pub`, `regress/t7.out.pub`, `regress/t9.out.pub`, `regress/timestamp`, but `## Git Add Paths` lists `None`. Update `## Git Add Paths` to match the real shipped file set exactly, and make sure `## Issue Connection` explains every functional file that remains in the patch.
2. Missing from `## Git Add Paths`: `aclocal.m4`, `config.h.in`, `configure`, `regress/authorized_keys_root`, `regress/check-perm`, `regress/data`, `regress/ecdsa-sha2-nistp256`, `regress/ecdsa-sha2-nistp256.pub`, `regress/ecdsa-sha2-nistp384`, `regress/ecdsa-sha2-nistp384.pub`, `regress/ecdsa-sha2-nistp521`, `regress/ecdsa-sha2-nistp521.pub`, `regress/failed-regress.log`, `regress/failed-ssh.log`, `regress/failed-sshd.log`, `regress/host.ecdsa-sha2-nistp256`, `regress/host.ecdsa-sha2-nistp384`, `regress/host.ecdsa-sha2-nistp521`, `regress/host.sk-ecdsa-sha2-nistp256@openssh.com`, `regress/host.sk-ssh-ed25519@openssh.com`, `regress/host.ssh-ed25519`, `regress/host.ssh-rsa`, `regress/known_hosts`, `regress/log/20260510T065104.927573.ssh.346.log`, `regress/mkdtemp`, `regress/modpipe`, `regress/netcat`, `regress/regress.log`, `regress/rsa_ssh2_cr.prv`, `regress/rsa_ssh2_crnl.prv`, `regress/setuid-allowed`, `regress/sk-ecdsa-sha2-nistp256@openssh.com`, `regress/sk-ecdsa-sha2-nistp256@openssh.com.pub`, `regress/sk-ssh-ed25519@openssh.com`, `regress/sk-ssh-ed25519@openssh.com.pub`, `regress/ssh-ed25519`, `regress/ssh-ed25519.pub`, `regress/ssh-log-wrapper.sh`, `regress/ssh-rsa`, `regress/ssh-rsa.pub`, `regress/ssh.log`, `regress/ssh_config`, `regress/ssh_proxy`, `regress/sshd-log-wrapper.sh`, `regress/sshd.log`, `regress/sshd_config`, `regress/sshd_proxy`, `regress/t10.out.pub`, `regress/t12.out.pub`, `regress/t7.out.pub`, `regress/t9.out.pub`, `regress/timestamp`.
2. Listed in `## Git Add Paths` but not actually changed: `None`.

## Refinement Pass 1

Subject: no patch: keep sshd-session diagnosis artifact-free

## Commit Message
No source change is proposed. The perf, strace, and `/proc` evidence still points at an `sshd-session` privilege-separation monitor sleeping in `poll`, not at a confirmed OpenSSH userspace loop. This refinement only removes validation artifacts so the no-patch diagnosis matches the clean worktree.

## Evidence Confidence
inferred

## Issue Connection
The collected signal was a Fixer runaway-process investigation for `sshd-session: gis [priv]`: libc `poll` in the backtrace, `/proc` state `S (sleeping)`, `wchan=poll_schedule_timeout.constprop.0`, one `restart_syscall` line over a 5 second strace, and `0.3%` total CPU across sampled `sshd-session` processes.

The cautious inference is that the sample caught normal privilege separation behavior. In OpenSSH, privilege separation means a privileged monitor process remains available for root-only operations; nearby code intentionally blocks in `monitor_read()` with `poll(..., -1)`, and the session loop blocks in `ppoll()` through the local `ptimeout_*` helpers.

I made no source change. I addressed the review finding by restoring the generated Autoconf files and removing untracked regression artifacts left by validation, so `## Git Add Paths` now matches the actual patch contents. I rechecked local docs and conventions: `README.md`, `README.privsep`, `regress/README.regress`, `ssh_signal()`, `fatal_f`/`error_f`/`debug_f`, `xmalloc`, `atomicio`, and `ptimeout_*`. No helper was needed because no code is changing.

The expected effect is to avoid shipping a speculative upstream patch until there is symbolized or reproducible evidence of an actual OpenSSH busy loop.

## Git Add Paths
None

## Validation
`./configure && make` failed from the clean workspace root with: `configure: error: ./configure.ac newer than configure, run autoreconf`.

`make` completed successfully using the generated build tree left from the earlier validation pass.

`make -n check` failed because there is no `check` target: `make: *** No rule to make target 'check'. Stop.`

The bounded reproduction attempt from the earlier author pass, `make tests LTESTS=connect-privsep`, failed before exercising a session: `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`. `./sshd-session` also only reported `sshd-session should not be executed directly`. No command reproduced sustained CPU use or a userspace loop.

Final `git status --short` is clean.

## Review Pass 2

RESULT: ok

No changed paths remain in the workspace, and `## Git Add Paths` correctly lists `None`. The latest response keeps `## Evidence Confidence` at `inferred`, does not claim a reproduced bug, and explains why the profiler/strace evidence is insufficient for an upstream source patch. Validation reports the project-level `./configure && make` blocker, the available `make` result, missing `check` target, and the blocked bounded reproduction attempt.

Diff

--- a/buildpkg.sh	1970-01-01 04:00:00.000000000 +0400
+++ b/buildpkg.sh	2026-05-10 06:50:24.881973128 +0400
@@ -0,0 +1,677 @@
+#!/bin/sh
+#
+# Fake Root Solaris/SVR4/SVR5 Build System - Prototype
+#
+# The following code has been provide under Public Domain License.  I really
+# don't care what you use it for.  Just as long as you don't complain to me
+# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
+#
+umask 022
+#
+# Options for building the package
+# You can create a openssh-config.local with your customized options
+#
+REMOVE_FAKE_ROOT_WHEN_DONE=yes
+#
+# uncommenting TEST_DIR and using
+# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
+# and
+# PKGNAME=tOpenSSH should allow testing a package without interfering
+# with a real OpenSSH package on a system. This is not needed on systems
+# that support the -R option to pkgadd.
+#TEST_DIR=/var/tmp	# leave commented out for production build
+PKGNAME=OpenSSH
+# revisions within the same version (REV=a)
+#REV=
+SYSVINIT_NAME=opensshd
+AWK=${AWK:="nawk"}
+MAKE=${MAKE:="make"}
+SSHDUID=67	# Default privsep uid
+SSHDGID=67	# Default privsep gid
+# uncomment these next three as needed
+#PERMIT_ROOT_LOGIN=no
+#X11_FORWARDING=yes
+#USR_LOCAL_IS_SYMLINK=yes
+# System V init run levels
+SYSVINITSTART=S98
+SYSVINITSTOP=K30
+# We will source these if they exist
+POST_MAKE_INSTALL_FIXES=./pkg-post-make-install-fixes.sh
+POST_PROTOTYPE_EDITS=./pkg-post-prototype-edit.sh
+# We'll be one level deeper looking for these
+PKG_PREINSTALL_LOCAL=../pkg-preinstall.local
+PKG_POSTINSTALL_LOCAL=../pkg-postinstall.local
+PKG_PREREMOVE_LOCAL=../pkg-preremove.local
+PKG_POSTREMOVE_LOCAL=../pkg-postremove.local
+PKG_REQUEST_LOCAL=../pkg-request.local
+# end of sourced files
+#
+OPENSSHD=opensshd.init
+OPENSSH_MANIFEST=openssh.xml
+OPENSSH_FMRI=svc:/site/${SYSVINIT_NAME}:default
+SMF_METHOD_DIR=/lib/svc/method/site
+SMF_MANIFEST_DIR=/var/svc/manifest/site
+
+PATH_GROUPADD_PROG=/usr/sbin/groupadd
+PATH_USERADD_PROG=/usr/sbin/useradd
+PATH_PASSWD_PROG=/usr/bin/passwd
+#
+# list of system directories we do NOT want to change owner/group/perms
+# when installing our package
+SYSTEM_DIR="/etc	\
+/etc/init.d		\
+/etc/rcS.d		\
+/etc/rc0.d		\
+/etc/rc1.d		\
+/etc/rc2.d		\
+/etc/opt		\
+/lib			\
+/lib/svc		\
+/lib/svc/method		\
+/lib/svc/method/site	\
+/opt			\
+/opt/bin		\
+/usr			\
+/usr/bin		\
+/usr/lib		\
+/usr/sbin		\
+/usr/share		\
+/usr/share/man		\
+/usr/share/man/man1	\
+/usr/share/man/man8	\
+/usr/local		\
+/usr/local/bin		\
+/usr/local/etc		\
+/usr/local/libexec	\
+/usr/local/man		\
+/usr/local/man/man1	\
+/usr/local/man/man8	\
+/usr/local/sbin		\
+/usr/local/share	\
+/var			\
+/var/opt		\
+/var/run		\
+/var/svc		\
+/var/svc/manifest	\
+/var/svc/manifest/site  \
+/var/tmp		\
+/tmp"
+
+# We may need to build as root so we make sure PATH is set up
+# only set the path if it's not set already
+[ -d /opt/bin ]  &&  {
+	echo $PATH | grep ":/opt/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/opt/bin
+}
+[ -d /usr/local/bin ]  &&  {
+	echo $PATH | grep ":/usr/local/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
+}
+[ -d /usr/ccs/bin ]  &&  {
+	echo $PATH | grep ":/usr/ccs/bin"  > /dev/null 2>&1
+	[ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
+}
+export PATH
+#
+
+[ -f Makefile ]  ||  {
+	echo "Please run this script from your build directory"
+	exit 1
+}
+
+# we will look for openssh-config.local to override the above options
+[ -s ./openssh-config.local ]  &&  . ./openssh-config.local
+
+START=`pwd`
+FAKE_ROOT=$START/pkg
+
+## Fill in some details, like prefix and sysconfdir
+for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir
+do
+	eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
+done
+
+## Are we using Solaris' SMF?
+DO_SMF=0
+if egrep "^#define USE_SOLARIS_PROCESS_CONTRACTS" config.h > /dev/null 2>&1
+then
+	DO_SMF=1
+fi
+
+## Collect value of privsep user
+for confvar in SSH_PRIVSEP_USER
+do
+	eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
+done
+
+## Set privsep defaults if not defined
+if [ -z "$SSH_PRIVSEP_USER" ]
+then
+	SSH_PRIVSEP_USER=sshd
+fi
+
+## Extract common info requires for the 'info' part of the package.
+VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'`
+
+ARCH=`uname -m`
+DEF_MSG="\n"
+OS_VER=`uname -v`
+SCRIPT_SHELL=/sbin/sh
+UNAME_R=`uname -r`
+UNAME_S=`uname -s`
+case ${UNAME_S} in
+	SunOS)	UNAME_S=Solaris
+		OS_VER=${UNAME_R}
+		ARCH=`uname -p`
+		RCS_D=yes
+		DEF_MSG="(default: n)"
+		;;
+	SCO_SV)	case ${UNAME_R} in
+			3.2)	UNAME_S=OpenServer5
+		OS_VER=`uname -X | grep Release | sed -e 's/^Rel.*3.2v//'`
+				;;
+			5)	UNAME_S=OpenServer6
+				;;
+		esac
+		SCRIPT_SHELL=/bin/sh
+		RC1_D=no
+		DEF_MSG="(default: n)"
+		;;
+esac
+
+case `basename $0` in
+	buildpkg.sh)
+## Start by faking root install
+echo "Faking root install..."
+[ -d $FAKE_ROOT ]  &&  rm -fr $FAKE_ROOT
+mkdir $FAKE_ROOT
+${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
+if [ $? -gt 0 ]
+then
+	echo "Fake root install failed, stopping."
+	exit 1
+fi
+
+## Setup our run level stuff while we are at it.
+if [ $DO_SMF -eq 1 ]
+then
+	# For Solaris' SMF, /lib/svc/method/site is the preferred place
+	# for start/stop scripts that aren't supplied with the OS, and
+	# similarly /var/svc/manifest/site for manifests.
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}
+	mkdir -p $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}${SMF_METHOD_DIR}/${SYSVINIT_NAME}
+
+	cat ${OPENSSH_MANIFEST} | \
+	    sed -e "s|__SYSVINIT_NAME__|${SYSVINIT_NAME}|" \
+	    -e "s|__SMF_METHOD_DIR__|${SMF_METHOD_DIR}|" \
+	    > $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+	chmod 644 $FAKE_ROOT${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d
+
+	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+	chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+fi
+
+[ "${PERMIT_ROOT_LOGIN}" = no ]  &&  \
+	perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+[ "${X11_FORWARDING}" = yes ]  &&  \
+	perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
+		$FAKE_ROOT${sysconfdir}/sshd_config
+# fix PrintMotd
+perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
+	$FAKE_ROOT${sysconfdir}/sshd_config
+
+# We don't want to overwrite config files on multiple installs
+mv $FAKE_ROOT${sysconfdir}/ssh_config $FAKE_ROOT${sysconfdir}/ssh_config.default
+mv $FAKE_ROOT${sysconfdir}/sshd_config $FAKE_ROOT${sysconfdir}/sshd_config.default
+
+# local tweeks here
+[ -s "${POST_MAKE_INSTALL_FIXES}" ]  &&  . ${POST_MAKE_INSTALL_FIXES}
+
+cd $FAKE_ROOT
+
+## Ok, this is outright wrong, but it will work.  I'm tired of pkgmk
+## whining.
+for i in *; do
+  PROTO_ARGS="$PROTO_ARGS $i=/$i";
+done
+
+## Build info file
+echo "Building pkginfo file..."
+cat > pkginfo << _EOF
+PKG=$PKGNAME
+NAME="OpenSSH Portable for ${UNAME_S}"
+DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
+VENDOR="OpenSSH Portable Team - https://www.openssh.com/portable.html"
+ARCH=$ARCH
+VERSION=$VERSION$REV
+CATEGORY="Security,application"
+BASEDIR=/
+CLASSES="none"
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+
+## Build empty depend file that may get updated by $POST_PROTOTYPE_EDITS
+echo "Building depend file..."
+touch depend
+
+## Build space file
+echo "Building space file..."
+if [ $DO_SMF -eq 1 ]
+then
+	# XXX Is this necessary?  If not, remove space line from mk-proto.awk.
+	touch space
+else
+	cat > space << _EOF
+# extra space required by start/stop links added by installf
+# in postinstall
+$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1
+$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME} 0 1
+_EOF
+	[ "$RC1_D" = no ]  ||  \
+	echo "$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+	[ "$RCS_D" = yes ]  &&  \
+	echo "$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME} 0 1" >> space
+fi
+
+## Build preinstall file
+echo "Building preinstall file..."
+cat > preinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+_EOF
+
+# local preinstall changes here
+[ -s "${PKG_PREINSTALL_LOCAL}" ]  &&  . ${PKG_PREINSTALL_LOCAL}
+
+cat >> preinstall << _EOF
+#
+if [ "\${PRE_INS_STOP}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm disable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+	fi
+fi
+
+exit 0
+_EOF
+
+## Build postinstall file
+echo "Building postinstall file..."
+cat > postinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ]  ||  \\
+	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
+		\${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
+
+# make rc?.d dirs only if we are doing a test install
+[ -n "${TEST_DIR}" ]  &&  [ $DO_SMF -ne 1 ] && {
+	[ "$RCS_D" = yes ]  &&  mkdir -p ${TEST_DIR}/etc/rcS.d
+	mkdir -p ${TEST_DIR}/etc/rc0.d
+	[ "$RC1_D" = no ]  ||  mkdir -p ${TEST_DIR}/etc/rc1.d
+	mkdir -p ${TEST_DIR}/etc/rc2.d
+}
+
+if [ $DO_SMF -eq 1 ]
+then
+	# Delete the existing service, if it exists, then import the
+	# new one.
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+	# NOTE, The manifest disables sshd by default.
+	svccfg import ${TEST_DIR}${SMF_MANIFEST_DIR}/${SYSVINIT_NAME}.xml
+else
+	if [ "\${USE_SYM_LINKS}" = yes ]
+	then
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+	else
+		[ "$RCS_D" = yes ]  &&  \\
+	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		[ "$RC1_D" = no ]  ||  \\
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOP}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+		installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+	fi
+fi
+
+# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
+[ -d $piddir ]  ||  installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 0755 root sys
+
+_EOF
+
+# local postinstall changes here
+[ -s "${PKG_POSTINSTALL_LOCAL}" ]  &&  . ${PKG_POSTINSTALL_LOCAL}
+
+cat >> postinstall << _EOF
+installf -f ${PKGNAME}
+
+# Use chroot to handle PKG_INSTALL_ROOT
+if [ ! -z "\${PKG_INSTALL_ROOT}" ]
+then
+	chroot="chroot \${PKG_INSTALL_ROOT}"
+fi
+# If this is a test build, we will skip the groupadd/useradd/passwd commands
+if [ ! -z "${TEST_DIR}" ]
+then
+	chroot=echo
+fi
+
+	echo "PrivilegeSeparation user always required."
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
+	then
+		echo "PrivSep user $SSH_PRIVSEP_USER already exists."
+		SSH_PRIVSEP_GROUP=\`grep "^$SSH_PRIVSEP_USER:" \${PKG_INSTALL_ROOT}/etc/passwd | awk -F: '{print \$4}'\`
+		SSH_PRIVSEP_GROUP=\`grep ":\$SSH_PRIVSEP_GROUP:" \${PKG_INSTALL_ROOT}/etc/group | awk -F: '{print \$1}'\`
+	else
+		DO_PASSWD=yes
+	fi
+	[ -z "\$SSH_PRIVSEP_GROUP" ]  &&  SSH_PRIVSEP_GROUP=$SSH_PRIVSEP_USER
+
+	# group required?
+	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'\$SSH_PRIVSEP_GROUP'\$' >/dev/null
+	then
+		echo "PrivSep group \$SSH_PRIVSEP_GROUP already exists."
+	else
+		DO_GROUP=yes
+	fi
+
+	# create group if required
+	[ "\$DO_GROUP" = yes ]  &&  {
+		# Use gid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
+		then
+			:
+		else
+			sshdgid="-g $SSHDGID"
+		fi
+		echo "Creating PrivSep group \$SSH_PRIVSEP_GROUP."
+		\$chroot ${PATH_GROUPADD_PROG} \$sshdgid \$SSH_PRIVSEP_GROUP
+	}
+
+	# Create user if required
+	[ "\$DO_PASSWD" = yes ]  &&  {
+		# Use uid of 67 if possible
+		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDUID'\$' >/dev/null
+		then
+			:
+		else
+			sshduid="-u $SSHDUID"
+		fi
+		echo "Creating PrivSep user $SSH_PRIVSEP_USER."
+		\$chroot ${PATH_USERADD_PROG} -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
+		\$chroot ${PATH_PASSWD_PROG} -l $SSH_PRIVSEP_USER
+	}
+
+if [ "\${POST_INS_START}" = "yes" ]
+then
+	if [ $DO_SMF -eq 1 ]
+	then
+		svcadm enable $OPENSSH_FMRI
+	else
+		${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
+	fi
+fi
+exit 0
+_EOF
+
+## Build preremove file
+echo "Building preremove file..."
+cat > preremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	svcadm disable $OPENSSH_FMRI
+else
+	${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+fi
+_EOF
+
+# local preremove changes here
+[ -s "${PKG_PREREMOVE_LOCAL}" ]  &&  . ${PKG_PREREMOVE_LOCAL}
+
+cat >> preremove << _EOF
+exit 0
+_EOF
+
+## Build postremove file
+echo "Building postremove file..."
+cat > postremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+if [ $DO_SMF -eq 1 ]
+then
+	if svcs $OPENSSH_FMRI > /dev/null 2>&1
+	then
+		svccfg delete -f $OPENSSH_FMRI
+	fi
+fi
+_EOF
+
+# local postremove changes here
+[ -s "${PKG_POSTREMOVE_LOCAL}" ]  &&  . ${PKG_POSTREMOVE_LOCAL}
+
+cat >> postremove << _EOF
+exit 0
+_EOF
+
+## Build request file
+echo "Building request file..."
+cat > request << _EOF
+trap 'exit 3' 15
+
+_EOF
+
+[ -x /usr/bin/ckyorn ]  ||  cat >> request << _EOF
+
+ckyorn() {
+# for some strange reason OpenServer5 has no ckyorn
+# We build a striped down version here
+
+DEFAULT=n
+PROMPT="Yes or No [yes,no,?,quit]"
+HELP_PROMPT="        Enter y or yes if your answer is yes; n or no if your answer is no."
+USAGE="usage: ckyorn [options]
+where options may include:
+        -d default
+        -h help
+        -p prompt
+"
+
+if [ \$# != 0 ]
+then
+	while getopts d:p:h: c
+	do
+		case \$c in
+			h)	HELP_PROMPT="\$OPTARG" ;;
+			d)	DEFAULT=\$OPTARG ;;
+			p)	PROMPT=\$OPTARG ;;
+			\\?)	echo "\$USAGE" 1>&2
+				exit 1 ;;
+		esac
+	done
+	shift \`expr \$OPTIND - 1\`
+fi
+
+while true
+do
+	echo "\${PROMPT}\\c " 1>&2
+	read key
+	[ -z "\$key" ]  &&  key=\$DEFAULT
+	case \$key in
+		[n,N]|[n,N][o,O]|[y,Y]|[y,Y][e,E][s,S])	echo "\${key}\\c"
+			exit 0 ;;
+		\\?)	echo \$HELP_PROMPT 1>&2 ;;
+		q|quit)	echo "q\\c" 1>&2
+			exit 3 ;;
+	esac
+done
+
+}
+
+_EOF
+
+if [ $DO_SMF -eq 1 ]
+then
+	# This could get hairy, as the running sshd may not be under SMF.
+	# We'll assume an earlier version of OpenSSH started via SMF.
+	cat >> request << _EOF
+PRE_INS_STOP=no
+POST_INS_START=no
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  ] && \\
+    /usr/bin/svcs -H $OPENSSH_FMRI 2>&1 | egrep "^online" > /dev/null 2>&1
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+else
+	cat >> request << _EOF
+USE_SYM_LINKS=no
+PRE_INS_STOP=no
+POST_INS_START=no
+# Use symbolic links?
+ans=\`ckyorn -d n \\
+-p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$?
+case \$ans in
+	[y,Y]*)	USE_SYM_LINKS=yes ;;
+esac
+
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid  -a  -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
+then
+	ans=\`ckyorn -d n \\
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	PRE_INS_STOP=yes
+			POST_INS_START=yes
+			;;
+	esac
+
+else
+
+# determine if we should start sshd
+	ans=\`ckyorn -d n \\
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+	case \$ans in
+		[y,Y]*)	POST_INS_START=yes ;;
+	esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+USE_SYM_LINKS='\$USE_SYM_LINKS'
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+fi
+
+# local request changes here
+[ -s "${PKG_REQUEST_LOCAL}" ]  &&  . ${PKG_REQUEST_LOCAL}
+
+cat >> request << _EOF
+exit 0
+
+_EOF
+
+## Next Build our prototype
+echo "Building prototype file..."
+cat >mk-proto.awk << _EOF
+	    BEGIN { print "i pkginfo"; print "i depend"; \\
+		    print "i preinstall"; print "i postinstall"; \\
+ 		    print "i preremove"; print "i postremove"; \\
+		    print "i request"; print "i space"; \\
+		    split("$SYSTEM_DIR",sys_files); }
+	    {
+	     for (dir in sys_files) { if ( \$3 != sys_files[dir] )
+		     { if ( \$1 == "s" )
+			{ \$5=""; \$6=""; }
+		     else
+			{ \$5="root"; \$6="sys"; }
+		     }
+		else
+		     { \$4="?"; \$5="?"; \$6="?"; break;}
+	    } }
+	    { print; }
+_EOF
+
+find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \
+	pkgproto $PROTO_ARGS | ${AWK} -f mk-proto.awk > prototype
+
+# /usr/local is a symlink on some systems
+[ "${USR_LOCAL_IS_SYMLINK}" = yes ]  &&  {
+	grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
+	mv prototype.new prototype
+}
+
+## Step back a directory and now build the package.
+cd ..
+# local prototype tweeks here
+[ -s "${POST_PROTOTYPE_EDITS}" ]  &&  . ${POST_PROTOTYPE_EDITS}
+
+echo "Building package.."
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+	justpkg.sh)
+rm -fr ${FAKE_ROOT}/${PKGNAME}
+grep -v "^PSTAMP=" $FAKE_ROOT/pkginfo > $$tmp
+mv $$tmp $FAKE_ROOT/pkginfo
+cat >> $FAKE_ROOT/pkginfo << _EOF
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
+	;;
+
+esac
+
+[ "${REMOVE_FAKE_ROOT_WHEN_DONE}" = yes ]  &&  rm -rf $FAKE_ROOT
+exit 0
+
--- a/config.h.in~	1970-01-01 04:00:00.000000000 +0400
+++ b/config.h.in~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,2107 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
+/* Define if you have a getaddrinfo that fails for the all-zeros IPv6 address
+   */
+#undef AIX_GETNAMEINFO_HACK
+
+/* Define if your AIX loginfailed() function takes 4 arguments (AIX >= 5.2) */
+#undef AIX_LOGINFAILED_4ARG
+
+/* System only supports IPv4 audit records */
+#undef AU_IPv4
+
+/* Define if your resolver libs need this for getrrsetbyname */
+#undef BIND_8_COMPAT
+
+/* The system has incomplete BSM API */
+#undef BROKEN_BSM_API
+
+/* broken in chroots on older kernels */
+#undef BROKEN_CLOSEFROM
+
+/* Define if cmsg_type is not passed correctly */
+#undef BROKEN_CMSG_TYPE
+
+/* getaddrinfo is broken (if present) */
+#undef BROKEN_GETADDRINFO
+
+/* getgroups(0,NULL) will return -1 */
+#undef BROKEN_GETGROUPS
+
+/* getline is not what we expect */
+#undef BROKEN_GETLINE
+
+/* Do not use system glob */
+#undef BROKEN_GLOB
+
+/* Define if you system's inet_ntoa is busted (e.g. Irix gcc issue) */
+#undef BROKEN_INET_NTOA
+
+/* Define if your struct dirent expects you to allocate extra space for d_name
+   */
+#undef BROKEN_ONE_BYTE_DIRENT_D_NAME
+
+/* System poll(2) implementation is broken */
+#undef BROKEN_POLL
+
+/* Can't do comparisons on readv */
+#undef BROKEN_READV_COMPARISON
+
+/* NetBSD read function is sometimes redirected, breaking atomicio comparisons
+   against it */
+#undef BROKEN_READ_COMPARISON
+
+/* Needed for NeXT */
+#undef BROKEN_SAVED_UIDS
+
+/* Define if your setregid() is broken */
+#undef BROKEN_SETREGID
+
+/* Define if your setresgid() is broken */
+#undef BROKEN_SETRESGID
+
+/* Define if your setresuid() is broken */
+#undef BROKEN_SETRESUID
+
+/* Define if your setreuid() is broken */
+#undef BROKEN_SETREUID
+
+/* LynxOS has broken setvbuf() implementation */
+#undef BROKEN_SETVBUF
+
+/* QNX shadow support is broken */
+#undef BROKEN_SHADOW_EXPIRE
+
+/* Define if your snprintf is busted */
+#undef BROKEN_SNPRINTF
+
+/* strndup broken, see APAR IY61211 */
+#undef BROKEN_STRNDUP
+
+/* strnlen broken, see APAR IY62551 */
+#undef BROKEN_STRNLEN
+
+/* strnvis detected broken */
+#undef BROKEN_STRNVIS
+
+/* tcgetattr with ICANON may hang */
+#undef BROKEN_TCGETATTR_ICANON
+
+/* updwtmpx is broken (if present) */
+#undef BROKEN_UPDWTMPX
+
+/* Define if you have BSD auth support */
+#undef BSD_AUTH
+
+/* Define if you want to specify the path to your lastlog file */
+#undef CONF_LASTLOG_FILE
+
+/* Define if you want to specify the path to your utmp file */
+#undef CONF_UTMP_FILE
+
+/* Define if you want to specify the path to your wtmpx file */
+#undef CONF_WTMPX_FILE
+
+/* Define if you want to specify the path to your wtmp file */
+#undef CONF_WTMP_FILE
+
+/* Need to call setpgrp as root */
+#undef DISABLE_FD_PASSING
+
+/* Define if you don't want to use lastlog */
+#undef DISABLE_LASTLOG
+
+/* Define if you don't want to use your system's login() call */
+#undef DISABLE_LOGIN
+
+/* Define if you don't want to use pututline() etc. to write [uw]tmp */
+#undef DISABLE_PUTUTLINE
+
+/* Define if you don't want to use pututxline() etc. to write [uw]tmpx */
+#undef DISABLE_PUTUTXLINE
+
+/* Define if you want to disable shadow passwords */
+#undef DISABLE_SHADOW
+
+/* Define if you don't want to use utmp */
+#undef DISABLE_UTMP
+
+/* Define if you don't want to use utmpx */
+#undef DISABLE_UTMPX
+
+/* Define if you don't want to use wtmp */
+#undef DISABLE_WTMP
+
+/* Define if you don't want to use wtmpx */
+#undef DISABLE_WTMPX
+
+/* Enable for PKCS#11 support */
+#undef ENABLE_PKCS11
+
+/* Enable for U2F/FIDO support */
+#undef ENABLE_SK
+
+/* Enable for built-in U2F/FIDO support */
+#undef ENABLE_SK_INTERNAL
+
+/* define if fflush(NULL) does not work */
+#undef FFLUSH_NULL_BUG
+
+/* File names may not contain backslash characters */
+#undef FILESYSTEM_NO_BACKSLASH
+
+/* fsid_t has member val */
+#undef FSID_HAS_VAL
+
+/* fsid_t has member __val */
+#undef FSID_HAS___VAL
+
+/* getpgrp takes one arg */
+#undef GETPGRP_VOID
+
+/* Conflicting defs for getspnam */
+#undef GETSPNAM_CONFLICTING_DEFS
+
+/* Define if your system glob() function has the GLOB_ALTDIRFUNC extension */
+#undef GLOB_HAS_ALTDIRFUNC
+
+/* Define if your system glob() function has gl_matchc options in glob_t */
+#undef GLOB_HAS_GL_MATCHC
+
+/* Define if your system glob() function has gl_statv options in glob_t */
+#undef GLOB_HAS_GL_STATV
+
+/* Define this if you want GSSAPI support in the version 2 protocol */
+#undef GSSAPI
+
+/* Define if you want to use shadow password expire field */
+#undef HAS_SHADOW_EXPIRE
+
+/* Define if your system uses access rights style file descriptor passing */
+#undef HAVE_ACCRIGHTS_IN_MSGHDR
+
+/* Define if you have ut_addr in utmp.h */
+#undef HAVE_ADDR_IN_UTMP
+
+/* Define if you have ut_addr in utmpx.h */
+#undef HAVE_ADDR_IN_UTMPX
+
+/* Define if you have ut_addr_v6 in utmp.h */
+#undef HAVE_ADDR_V6_IN_UTMP
+
+/* Define if you have ut_addr_v6 in utmpx.h */
+#undef HAVE_ADDR_V6_IN_UTMPX
+
+/* Define to 1 if you have the `arc4random' function. */
+#undef HAVE_ARC4RANDOM
+
+/* Define to 1 if you have the `arc4random_buf' function. */
+#undef HAVE_ARC4RANDOM_BUF
+
+/* Define to 1 if you have the `arc4random_stir' function. */
+#undef HAVE_ARC4RANDOM_STIR
+
+/* Define to 1 if you have the `arc4random_uniform' function. */
+#undef HAVE_ARC4RANDOM_UNIFORM
+
+/* Define to 1 if you have the `asprintf' function. */
+#undef HAVE_ASPRINTF
+
+/* OpenBSD's gcc has bounded */
+#undef HAVE_ATTRIBUTE__BOUNDED__
+
+/* Have attribute nonnull */
+#undef HAVE_ATTRIBUTE__NONNULL__
+
+/* compiler supports nonstring attribute */
+#undef HAVE_ATTRIBUTE__NONSTRING__
+
+/* OpenBSD's gcc has sentinel */
+#undef HAVE_ATTRIBUTE__SENTINEL__
+
+/* Define to 1 if you have the `aug_get_machine' function. */
+#undef HAVE_AUG_GET_MACHINE
+
+/* Define to 1 if you have the `auth_hostok' function. */
+#undef HAVE_AUTH_HOSTOK
+
+/* Define to 1 if you have the `auth_timeok' function. */
+#undef HAVE_AUTH_TIMEOK
+
+/* Define to 1 if you have the `b64_ntop' function. */
+#undef HAVE_B64_NTOP
+
+/* Define to 1 if you have the `b64_pton' function. */
+#undef HAVE_B64_PTON
+
+/* Define if you have the basename function. */
+#undef HAVE_BASENAME
+
+/* Define to 1 if you have the `bcopy' function. */
+#undef HAVE_BCOPY
+
+/* Define to 1 if you have the `bcrypt_pbkdf' function. */
+#undef HAVE_BCRYPT_PBKDF
+
+/* Define to 1 if you have the `bindresvport_sa' function. */
+#undef HAVE_BINDRESVPORT_SA
+
+/* Define to 1 if you have the `blf_enc' function. */
+#undef HAVE_BLF_ENC
+
+/* Define to 1 if you have the <blf.h> header file. */
+#undef HAVE_BLF_H
+
+/* Define to 1 if you have the `Blowfish_expand0state' function. */
+#undef HAVE_BLOWFISH_EXPAND0STATE
+
+/* Define to 1 if you have the `Blowfish_expandstate' function. */
+#undef HAVE_BLOWFISH_EXPANDSTATE
+
+/* Define to 1 if you have the `Blowfish_initstate' function. */
+#undef HAVE_BLOWFISH_INITSTATE
+
+/* Define to 1 if you have the `Blowfish_stream2word' function. */
+#undef HAVE_BLOWFISH_STREAM2WORD
+
+/* Define to 1 if you have the `BN_is_prime_ex' function. */
+#undef HAVE_BN_IS_PRIME_EX
+
+/* Define to 1 if you have the <bsd/libutil.h> header file. */
+#undef HAVE_BSD_LIBUTIL_H
+
+/* Define to 1 if you have the <bsm/audit.h> header file. */
+#undef HAVE_BSM_AUDIT_H
+
+/* Define to 1 if you have the <bstring.h> header file. */
+#undef HAVE_BSTRING_H
+
+/* Define to 1 if you have the `bzero' function. */
+#undef HAVE_BZERO
+
+/* calloc(0, x) returns NULL */
+#undef HAVE_CALLOC
+
+/* Define if you have caph_cache_tzdata */
+#undef HAVE_CAPH_CACHE_TZDATA
+
+/* Define to 1 if you have the <capsicum_helpers.h> header file. */
+#undef HAVE_CAPSICUM_HELPERS_H
+
+/* Define to 1 if you have the `cap_rights_limit' function. */
+#undef HAVE_CAP_RIGHTS_LIMIT
+
+/* Define to 1 if you have the `clock' function. */
+#undef HAVE_CLOCK
+
+/* Have clock_gettime */
+#undef HAVE_CLOCK_GETTIME
+
+/* define if you have clock_t data type */
+#undef HAVE_CLOCK_T
+
+/* Define to 1 if you have the `closefrom' function. */
+#undef HAVE_CLOSEFROM
+
+/* Define to 1 if you have the `close_range' function. */
+#undef HAVE_CLOSE_RANGE
+
+/* Define if gai_strerror() returns const char * */
+#undef HAVE_CONST_GAI_STRERROR_PROTO
+
+/* Define if your system uses ancillary data style file descriptor passing */
+#undef HAVE_CONTROL_IN_MSGHDR
+
+/* Define to 1 if you have the `crypt' function. */
+#undef HAVE_CRYPT
+
+/* Define to 1 if you have the <crypto/sha2.h> header file. */
+#undef HAVE_CRYPTO_SHA2_H
+
+/* Define to 1 if you have the <crypt.h> header file. */
+#undef HAVE_CRYPT_H
+
+/* Define if you are on Cygwin */
+#undef HAVE_CYGWIN
+
+/* Define if your libraries define daemon() */
+#undef HAVE_DAEMON
+
+/* Define to 1 if you have the declaration of `AI_NUMERICSERV', and to 0 if
+   you don't. */
+#undef HAVE_DECL_AI_NUMERICSERV
+
+/* Define to 1 if you have the declaration of `authenticate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_AUTHENTICATE
+
+/* Define to 1 if you have the declaration of `bzero', and to 0 if you don't.
+   */
+#undef HAVE_DECL_BZERO
+
+/* Define to 1 if you have the declaration of `ftruncate', and to 0 if you
+   don't. */
+#undef HAVE_DECL_FTRUNCATE
+
+/* Define to 1 if you have the declaration of `getentropy', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETENTROPY
+
+/* Define to 1 if you have the declaration of `getpeereid', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GETPEEREID
+
+/* Define to 1 if you have the declaration of `GLOB_NOMATCH', and to 0 if you
+   don't. */
+#undef HAVE_DECL_GLOB_NOMATCH
+
+/* Define to 1 if you have the declaration of `GSS_C_NT_HOSTBASED_SERVICE',
+   and to 0 if you don't. */
+#undef HAVE_DECL_GSS_C_NT_HOSTBASED_SERVICE
+
+/* Define to 1 if you have the declaration of `howmany', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HOWMANY
+
+/* Define to 1 if you have the declaration of `htole64', and to 0 if you
+   don't. */
+#undef HAVE_DECL_HTOLE64
+
+/* Define to 1 if you have the declaration of `h_errno', and to 0 if you
+   don't. */
+#undef HAVE_DECL_H_ERRNO
+
+/* Define to 1 if you have the declaration of `INFINITY', and to 0 if you
+   don't. */
+#undef HAVE_DECL_INFINITY
+
+/* Define to 1 if you have the declaration of `le32toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE32TOH
+
+/* Define to 1 if you have the declaration of `le64toh', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LE64TOH
+
+/* Define to 1 if you have the declaration of `loginfailed', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINFAILED
+
+/* Define to 1 if you have the declaration of `loginrestrictions', and to 0 if
+   you don't. */
+#undef HAVE_DECL_LOGINRESTRICTIONS
+
+/* Define to 1 if you have the declaration of `loginsuccess', and to 0 if you
+   don't. */
+#undef HAVE_DECL_LOGINSUCCESS
+
+/* Define to 1 if you have the declaration of `MAXSYMLINKS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_MAXSYMLINKS
+
+/* Define to 1 if you have the declaration of `memmem', and to 0 if you don't.
+   */
+#undef HAVE_DECL_MEMMEM
+
+/* Define to 1 if you have the declaration of `NFDBITS', and to 0 if you
+   don't. */
+#undef HAVE_DECL_NFDBITS
+
+/* Define to 1 if you have the declaration of `offsetof', and to 0 if you
+   don't. */
+#undef HAVE_DECL_OFFSETOF
+
+/* Define to 1 if you have the declaration of `O_NONBLOCK', and to 0 if you
+   don't. */
+#undef HAVE_DECL_O_NONBLOCK
+
+/* Define to 1 if you have the declaration of `passwdexpired', and to 0 if you
+   don't. */
+#undef HAVE_DECL_PASSWDEXPIRED
+
+/* Define to 1 if you have the declaration of `readv', and to 0 if you don't.
+   */
+#undef HAVE_DECL_READV
+
+/* Define to 1 if you have the declaration of `setauthdb', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SETAUTHDB
+
+/* Define to 1 if you have the declaration of `SHUT_RD', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SHUT_RD
+
+/* Define to 1 if you have the declaration of `UINT32_MAX', and to 0 if you
+   don't. */
+#undef HAVE_DECL_UINT32_MAX
+
+/* Define to 1 if you have the declaration of `writev', and to 0 if you don't.
+   */
+#undef HAVE_DECL_WRITEV
+
+/* Define to 1 if you have the declaration of `_getlong', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETLONG
+
+/* Define to 1 if you have the declaration of `_getshort', and to 0 if you
+   don't. */
+#undef HAVE_DECL__GETSHORT
+
+/* Define to 1 if you have the declaration of `__builtin_inff', and to 0 if
+   you don't. */
+#undef HAVE_DECL___BUILTIN_INFF
+
+/* Define to 1 if you have the `DES_crypt' function. */
+#undef HAVE_DES_CRYPT
+
+/* Define if you have /dev/ptmx */
+#undef HAVE_DEV_PTMX
+
+/* Define if you have /dev/ptc */
+#undef HAVE_DEV_PTS_AND_PTC
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the `dirfd' function. */
+#undef HAVE_DIRFD
+
+/* Define to 1 if you have the `dirname' function. */
+#undef HAVE_DIRNAME
+
+/* Define to 1 if you have the `dlopen' function. */
+#undef HAVE_DLOPEN
+
+/* Define to 1 if you have the `EC_KEY_METHOD_new' function. */
+#undef HAVE_EC_KEY_METHOD_NEW
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates' function. */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_get_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_GET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates' function. */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES
+
+/* Define to 1 if you have the `EC_POINT_set_affine_coordinates_GFp' function.
+   */
+#undef HAVE_EC_POINT_SET_AFFINE_COORDINATES_GFP
+
+/* Define to 1 if you have the <elf.h> header file. */
+#undef HAVE_ELF_H
+
+/* Define to 1 if you have the `endgrent' function. */
+#undef HAVE_ENDGRENT
+
+/* Define to 1 if you have the <endian.h> header file. */
+#undef HAVE_ENDIAN_H
+
+/* Define to 1 if you have the `endutent' function. */
+#undef HAVE_ENDUTENT
+
+/* Define to 1 if you have the `endutxent' function. */
+#undef HAVE_ENDUTXENT
+
+/* Define to 1 if you have the `err' function. */
+#undef HAVE_ERR
+
+/* Define to 1 if you have the `errx' function. */
+#undef HAVE_ERRX
+
+/* Define to 1 if you have the <err.h> header file. */
+#undef HAVE_ERR_H
+
+/* Define if your system has /etc/default/login */
+#undef HAVE_ETC_DEFAULT_LOGIN
+
+/* Define to 1 if you have the `EVP_chacha20' function. */
+#undef HAVE_EVP_CHACHA20
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_get_updated_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_GET_UPDATED_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_iv_noconst' function. */
+#undef HAVE_EVP_CIPHER_CTX_IV_NOCONST
+
+/* Define to 1 if you have the `EVP_CIPHER_CTX_set_iv' function. */
+#undef HAVE_EVP_CIPHER_CTX_SET_IV
+
+/* Define to 1 if you have the `EVP_DigestFinal_ex' function. */
+#undef HAVE_EVP_DIGESTFINAL_EX
+
+/* Define to 1 if you have the `EVP_DigestInit_ex' function. */
+#undef HAVE_EVP_DIGESTINIT_EX
+
+/* Define to 1 if you have the `EVP_DigestSign' function. */
+#undef HAVE_EVP_DIGESTSIGN
+
+/* Define to 1 if you have the `EVP_DigestVerify' function. */
+#undef HAVE_EVP_DIGESTVERIFY
+
+/* Define to 1 if you have the `EVP_MD_CTX_cleanup' function. */
+#undef HAVE_EVP_MD_CTX_CLEANUP
+
+/* Define to 1 if you have the `EVP_MD_CTX_copy_ex' function. */
+#undef HAVE_EVP_MD_CTX_COPY_EX
+
+/* Define to 1 if you have the `EVP_MD_CTX_init' function. */
+#undef HAVE_EVP_MD_CTX_INIT
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_private_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PRIVATE_KEY
+
+/* Define to 1 if you have the `EVP_PKEY_get_raw_public_key' function. */
+#undef HAVE_EVP_PKEY_GET_RAW_PUBLIC_KEY
+
+/* Define to 1 if you have the `EVP_sha256' function. */
+#undef HAVE_EVP_SHA256
+
+/* Define to 1 if you have the `EVP_sha384' function. */
+#undef HAVE_EVP_SHA384
+
+/* Define to 1 if you have the `EVP_sha512' function. */
+#undef HAVE_EVP_SHA512
+
+/* Define if you have ut_exit in utmp.h */
+#undef HAVE_EXIT_IN_UTMP
+
+/* Define to 1 if you have the `explicit_bzero' function. */
+#undef HAVE_EXPLICIT_BZERO
+
+/* Define to 1 if you have the `explicit_memset' function. */
+#undef HAVE_EXPLICIT_MEMSET
+
+/* Define to 1 if you have the `fchmod' function. */
+#undef HAVE_FCHMOD
+
+/* Define to 1 if you have the `fchmodat' function. */
+#undef HAVE_FCHMODAT
+
+/* Define to 1 if you have the `fchown' function. */
+#undef HAVE_FCHOWN
+
+/* Define to 1 if you have the `fchownat' function. */
+#undef HAVE_FCHOWNAT
+
+/* Use F_CLOSEM fcntl for closefrom */
+#undef HAVE_FCNTL_CLOSEM
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if the system has the type `fd_mask'. */
+#undef HAVE_FD_MASK
+
+/* Define to 1 if you have the <features.h> header file. */
+#undef HAVE_FEATURES_H
+
+/* Define to 1 if you have the `fido_assert_set_clientdata' function. */
+#undef HAVE_FIDO_ASSERT_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_prot' function. */
+#undef HAVE_FIDO_CRED_PROT
+
+/* Define to 1 if you have the `fido_cred_set_clientdata' function. */
+#undef HAVE_FIDO_CRED_SET_CLIENTDATA
+
+/* Define to 1 if you have the `fido_cred_set_prot' function. */
+#undef HAVE_FIDO_CRED_SET_PROT
+
+/* Define to 1 if you have the `fido_dev_get_touch_begin' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_BEGIN
+
+/* Define to 1 if you have the `fido_dev_get_touch_status' function. */
+#undef HAVE_FIDO_DEV_GET_TOUCH_STATUS
+
+/* Define to 1 if you have the `fido_dev_is_winhello' function. */
+#undef HAVE_FIDO_DEV_IS_WINHELLO
+
+/* Define to 1 if you have the `fido_dev_supports_cred_prot' function. */
+#undef HAVE_FIDO_DEV_SUPPORTS_CRED_PROT
+
+/* Define to 1 if you have the <floatingpoint.h> header file. */
+#undef HAVE_FLOATINGPOINT_H
+
+/* Define to 1 if you have the `flock' function. */
+#undef HAVE_FLOCK
+
+/* Define to 1 if you have the `fmt_scaled' function. */
+#undef HAVE_FMT_SCALED
+
+/* Define to 1 if you have the `fnmatch' function. */
+#undef HAVE_FNMATCH
+
+/* Define to 1 if you have the <fnmatch.h> header file. */
+#undef HAVE_FNMATCH_H
+
+/* Define to 1 if you have the `freeaddrinfo' function. */
+#undef HAVE_FREEADDRINFO
+
+/* Define to 1 if you have the `freezero' function. */
+#undef HAVE_FREEZERO
+
+/* Define to 1 if the system has the type `fsblkcnt_t'. */
+#undef HAVE_FSBLKCNT_T
+
+/* Define to 1 if the system has the type `fsfilcnt_t'. */
+#undef HAVE_FSFILCNT_T
+
+/* Define to 1 if you have the `fstatat' function. */
+#undef HAVE_FSTATAT
+
+/* Define to 1 if you have the `fstatfs' function. */
+#undef HAVE_FSTATFS
+
+/* Define to 1 if you have the `fstatvfs' function. */
+#undef HAVE_FSTATVFS
+
+/* Define to 1 if you have the `futimes' function. */
+#undef HAVE_FUTIMES
+
+/* Define to 1 if you have the `gai_strerror' function. */
+#undef HAVE_GAI_STRERROR
+
+/* Define to 1 if you have the `getaddrinfo' function. */
+#undef HAVE_GETADDRINFO
+
+/* Define to 1 if you have the `getaudit' function. */
+#undef HAVE_GETAUDIT
+
+/* Define to 1 if you have the `getaudit_addr' function. */
+#undef HAVE_GETAUDIT_ADDR
+
+/* Define to 1 if you have the `getcwd' function. */
+#undef HAVE_GETCWD
+
+/* Define to 1 if you have the `getentropy' function. */
+#undef HAVE_GETENTROPY
+
+/* Define to 1 if you have the `getgrouplist' function. */
+#undef HAVE_GETGROUPLIST
+
+/* Define to 1 if you have the `getgrset' function. */
+#undef HAVE_GETGRSET
+
+/* Define to 1 if you have the `getlastlogxbyname' function. */
+#undef HAVE_GETLASTLOGXBYNAME
+
+/* Define to 1 if you have the `getline' function. */
+#undef HAVE_GETLINE
+
+/* Define to 1 if you have the `getluid' function. */
+#undef HAVE_GETLUID
+
+/* Define to 1 if you have the `getnameinfo' function. */
+#undef HAVE_GETNAMEINFO
+
+/* Define to 1 if you have the `getopt' function. */
+#undef HAVE_GETOPT
+
+/* Define to 1 if you have the <getopt.h> header file. */
+#undef HAVE_GETOPT_H
+
+/* Define if your getopt(3) defines and uses optreset */
+#undef HAVE_GETOPT_OPTRESET
+
+/* Define if your libraries define getpagesize() */
+#undef HAVE_GETPAGESIZE
+
+/* Define to 1 if you have the `getpeereid' function. */
+#undef HAVE_GETPEEREID
+
+/* Define to 1 if you have the `getpeerucred' function. */
+#undef HAVE_GETPEERUCRED
+
+/* Define to 1 if you have the `getpgid' function. */
+#undef HAVE_GETPGID
+
+/* Define to 1 if you have the `getpgrp' function. */
+#undef HAVE_GETPGRP
+
+/* Define to 1 if you have the `getpwanam' function. */
+#undef HAVE_GETPWANAM
+
+/* Define to 1 if you have the `getrandom' function. */
+#undef HAVE_GETRANDOM
+
+/* Define to 1 if you have the `getrlimit' function. */
+#undef HAVE_GETRLIMIT
+
+/* Define if getrrsetbyname() exists */
+#undef HAVE_GETRRSETBYNAME
+
+/* Define to 1 if you have the `getseuserbyname' function. */
+#undef HAVE_GETSEUSERBYNAME
+
+/* Define to 1 if you have the `getsid' function. */
+#undef HAVE_GETSID
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define to 1 if you have the `getttyent' function. */
+#undef HAVE_GETTTYENT
+
+/* Define to 1 if you have the `getutent' function. */
+#undef HAVE_GETUTENT
+
+/* Define to 1 if you have the `getutid' function. */
+#undef HAVE_GETUTID
+
+/* Define to 1 if you have the `getutline' function. */
+#undef HAVE_GETUTLINE
+
+/* Define to 1 if you have the `getutxent' function. */
+#undef HAVE_GETUTXENT
+
+/* Define to 1 if you have the `getutxid' function. */
+#undef HAVE_GETUTXID
+
+/* Define to 1 if you have the `getutxline' function. */
+#undef HAVE_GETUTXLINE
+
+/* Define to 1 if you have the `getutxuser' function. */
+#undef HAVE_GETUTXUSER
+
+/* Define to 1 if you have the `get_default_context_with_level' function. */
+#undef HAVE_GET_DEFAULT_CONTEXT_WITH_LEVEL
+
+/* Define to 1 if you have the `glob' function. */
+#undef HAVE_GLOB
+
+/* Define to 1 if you have the <glob.h> header file. */
+#undef HAVE_GLOB_H
+
+/* Define to 1 if you have the `group_from_gid' function. */
+#undef HAVE_GROUP_FROM_GID
+
+/* Define to 1 if you have the <gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi_generic.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_GENERIC_H
+
+/* Define to 1 if you have the <gssapi/gssapi.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi/gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_GSSAPI_KRB5_H
+
+/* Define to 1 if you have the <gssapi.h> header file. */
+#undef HAVE_GSSAPI_H
+
+/* Define to 1 if you have the <gssapi_krb5.h> header file. */
+#undef HAVE_GSSAPI_KRB5_H
+
+/* Define if HEADER.ad exists in arpa/nameser.h */
+#undef HAVE_HEADER_AD
+
+/* Define to 1 if you have the `HMAC_CTX_init' function. */
+#undef HAVE_HMAC_CTX_INIT
+
+/* Define if you have ut_host in utmp.h */
+#undef HAVE_HOST_IN_UTMP
+
+/* Define if you have ut_host in utmpx.h */
+#undef HAVE_HOST_IN_UTMPX
+
+/* Define to 1 if you have the <iaf.h> header file. */
+#undef HAVE_IAF_H
+
+/* Define to 1 if you have the <ia.h> header file. */
+#undef HAVE_IA_H
+
+/* Define if you have ut_id in utmp.h */
+#undef HAVE_ID_IN_UTMP
+
+/* Define if you have ut_id in utmpx.h */
+#undef HAVE_ID_IN_UTMPX
+
+/* Define to 1 if you have the <ifaddrs.h> header file. */
+#undef HAVE_IFADDRS_H
+
+/* Define to 1 if you have the `inet_aton' function. */
+#undef HAVE_INET_ATON
+
+/* Define to 1 if you have the `inet_ntoa' function. */
+#undef HAVE_INET_NTOA
+
+/* Define to 1 if you have the `inet_ntop' function. */
+#undef HAVE_INET_NTOP
+
+/* Define to 1 if you have the `innetgr' function. */
+#undef HAVE_INNETGR
+
+/* define if you have int64_t data type */
+#undef HAVE_INT64_T
+
+/* Define to 1 if the system has the type `intmax_t'. */
+#undef HAVE_INTMAX_T
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* define if you have intxx_t data type */
+#undef HAVE_INTXX_T
+
+/* Define to 1 if the system has the type `in_addr_t'. */
+#undef HAVE_IN_ADDR_T
+
+/* Define to 1 if the system has the type `in_port_t'. */
+#undef HAVE_IN_PORT_T
+
+/* Define if you have isblank(3C). */
+#undef HAVE_ISBLANK
+
+/* Define to 1 if you have the `killpg' function. */
+#undef HAVE_KILLPG
+
+/* Define to 1 if you have the `krb5_cc_new_unique' function. */
+#undef HAVE_KRB5_CC_NEW_UNIQUE
+
+/* Define to 1 if you have the `krb5_free_error_message' function. */
+#undef HAVE_KRB5_FREE_ERROR_MESSAGE
+
+/* Define to 1 if you have the `krb5_get_error_message' function. */
+#undef HAVE_KRB5_GET_ERROR_MESSAGE
+
+/* Define to 1 if you have the <langinfo.h> header file. */
+#undef HAVE_LANGINFO_H
+
+/* Define to 1 if you have the <lastlog.h> header file. */
+#undef HAVE_LASTLOG_H
+
+/* Define if you want ldns support */
+#undef HAVE_LDNS
+
+/* Define to 1 if you have the <libaudit.h> header file. */
+#undef HAVE_LIBAUDIT_H
+
+/* Define to 1 if you have the `bsm' library (-lbsm). */
+#undef HAVE_LIBBSM
+
+/* Define to 1 if you have the `dl' library (-ldl). */
+#undef HAVE_LIBDL
+
+/* Define to 1 if you have the <libgen.h> header file. */
+#undef HAVE_LIBGEN_H
+
+/* Define if system has libiaf that supports set_id */
+#undef HAVE_LIBIAF
+
+/* Define to 1 if you have the `network' library (-lnetwork). */
+#undef HAVE_LIBNETWORK
+
+/* Define to 1 if you have the `pam' library (-lpam). */
+#undef HAVE_LIBPAM
+
+/* Define to 1 if you have the <libproc.h> header file. */
+#undef HAVE_LIBPROC_H
+
+/* Define to 1 if you have the `socket' library (-lsocket). */
+#undef HAVE_LIBSOCKET
+
+/* Define to 1 if you have the <libutil.h> header file. */
+#undef HAVE_LIBUTIL_H
+
+/* Define to 1 if you have the `xnet' library (-lxnet). */
+#undef HAVE_LIBXNET
+
+/* Define to 1 if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <linux/audit.h> header file. */
+#undef HAVE_LINUX_AUDIT_H
+
+/* Define to 1 if you have the <linux/filter.h> header file. */
+#undef HAVE_LINUX_FILTER_H
+
+/* Define to 1 if you have the <linux/if_tun.h> header file. */
+#undef HAVE_LINUX_IF_TUN_H
+
+/* Define to 1 if you have the <linux/seccomp.h> header file. */
+#undef HAVE_LINUX_SECCOMP_H
+
+/* Define to 1 if you have the `llabs' function. */
+#undef HAVE_LLABS
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the `localtime_r' function. */
+#undef HAVE_LOCALTIME_R
+
+/* Define to 1 if you have the `login' function. */
+#undef HAVE_LOGIN
+
+/* Define to 1 if you have the <login_cap.h> header file. */
+#undef HAVE_LOGIN_CAP_H
+
+/* Define to 1 if you have the `login_getcapbool' function. */
+#undef HAVE_LOGIN_GETCAPBOOL
+
+/* Define to 1 if you have the `login_getpwclass' function. */
+#undef HAVE_LOGIN_GETPWCLASS
+
+/* Define to 1 if you have the <login.h> header file. */
+#undef HAVE_LOGIN_H
+
+/* Define to 1 if you have the `logout' function. */
+#undef HAVE_LOGOUT
+
+/* Define to 1 if you have the `logwtmp' function. */
+#undef HAVE_LOGWTMP
+
+/* Define to 1 if the system has the type `long double'. */
+#undef HAVE_LONG_DOUBLE
+
+/* Define to 1 if the system has the type `long long'. */
+#undef HAVE_LONG_LONG
+
+/* Define to 1 if you have the <maillock.h> header file. */
+#undef HAVE_MAILLOCK_H
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+   to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the `mblen' function. */
+#undef HAVE_MBLEN
+
+/* Define to 1 if you have the `mbtowc' function. */
+#undef HAVE_MBTOWC
+
+/* Define to 1 if you have the `memmem' function. */
+#undef HAVE_MEMMEM
+
+/* Define to 1 if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define to 1 if you have the `memset_s' function. */
+#undef HAVE_MEMSET_S
+
+/* Define to 1 if you have the `mkdtemp' function. */
+#undef HAVE_MKDTEMP
+
+/* Define to 1 if you have the `mmap' function. */
+#undef HAVE_MMAP
+
+/* define if you have mode_t data type */
+#undef HAVE_MODE_T
+
+/* Some systems put nanosleep outside of libc */
+#undef HAVE_NANOSLEEP
+
+/* Define to 1 if you have the <ndir.h> header file. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the <netdb.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define to 1 if you have the <netgroup.h> header file. */
+#undef HAVE_NETGROUP_H
+
+/* Define to 1 if you have the <net/if_tun.h> header file. */
+#undef HAVE_NET_IF_TUN_H
+
+/* Define to 1 if you have the <net/route.h> header file. */
+#undef HAVE_NET_ROUTE_H
+
+/* Define if you are on NeXT */
+#undef HAVE_NEXT
+
+/* Define to 1 if the system has the type `nfds_t'. */
+#undef HAVE_NFDS_T
+
+/* Define to 1 if you have the `ngetaddrinfo' function. */
+#undef HAVE_NGETADDRINFO
+
+/* Define to 1 if you have the `nlist' function. */
+#undef HAVE_NLIST
+
+/* Define to 1 if you have the <nlist.h> header file. */
+#undef HAVE_NLIST_H
+
+/* Define to 1 if you have the `nl_langinfo' function. */
+#undef HAVE_NL_LANGINFO
+
+/* Define to 1 if you have the `nsleep' function. */
+#undef HAVE_NSLEEP
+
+/* Define to 1 if you have the `ogetaddrinfo' function. */
+#undef HAVE_OGETADDRINFO
+
+/* Define if you have an old version of PAM which takes only one argument to
+   pam_strerror */
+#undef HAVE_OLD_PAM
+
+/* Define to 1 if you have the `openlog_r' function. */
+#undef HAVE_OPENLOG_R
+
+/* Define to 1 if you have the `openpty' function. */
+#undef HAVE_OPENPTY
+
+/* Define to 1 if you have the `OpenSSL_version' function. */
+#undef HAVE_OPENSSL_VERSION
+
+/* Define to 1 if you have the `OpenSSL_version_num' function. */
+#undef HAVE_OPENSSL_VERSION_NUM
+
+/* Define if you have Digital Unix Security Integration Architecture */
+#undef HAVE_OSF_SIA
+
+/* Define to 1 if you have the `pam_getenvlist' function. */
+#undef HAVE_PAM_GETENVLIST
+
+/* Define to 1 if you have the <pam/pam_appl.h> header file. */
+#undef HAVE_PAM_PAM_APPL_H
+
+/* Define to 1 if you have the `pam_putenv' function. */
+#undef HAVE_PAM_PUTENV
+
+/* Define to 1 if you have the <paths.h> header file. */
+#undef HAVE_PATHS_H
+
+/* Define if you have ut_pid in utmp.h */
+#undef HAVE_PID_IN_UTMP
+
+/* define if you have pid_t data type */
+#undef HAVE_PID_T
+
+/* Define to 1 if you have the `pledge' function. */
+#undef HAVE_PLEDGE
+
+/* Define to 1 if you have the `poll' function. */
+#undef HAVE_POLL
+
+/* Define to 1 if you have the <poll.h> header file. */
+#undef HAVE_POLL_H
+
+/* Define to 1 if you have the `ppoll' function. */
+#undef HAVE_PPOLL
+
+/* Define to 1 if you have the `prctl' function. */
+#undef HAVE_PRCTL
+
+/* Define to 1 if you have the `priv_basicset' function. */
+#undef HAVE_PRIV_BASICSET
+
+/* Define to 1 if you have the <priv.h> header file. */
+#undef HAVE_PRIV_H
+
+/* Define to 1 if you have the `procctl' function. */
+#undef HAVE_PROCCTL
+
+/* Define if you have /proc/$pid/fd */
+#undef HAVE_PROC_PID
+
+/* Define to 1 if you have the `proc_pidinfo' function. */
+#undef HAVE_PROC_PIDINFO
+
+/* Define to 1 if you have the `pselect' function. */
+#undef HAVE_PSELECT
+
+/* Define to 1 if you have the `pstat' function. */
+#undef HAVE_PSTAT
+
+/* Define to 1 if you have the <pty.h> header file. */
+#undef HAVE_PTY_H
+
+/* Define to 1 if you have the `pututline' function. */
+#undef HAVE_PUTUTLINE
+
+/* Define to 1 if you have the `pututxline' function. */
+#undef HAVE_PUTUTXLINE
+
+/* Define to 1 if you have the `raise' function. */
+#undef HAVE_RAISE
+
+/* Define to 1 if you have the `readpassphrase' function. */
+#undef HAVE_READPASSPHRASE
+
+/* Define to 1 if you have the <readpassphrase.h> header file. */
+#undef HAVE_READPASSPHRASE_H
+
+/* Define to 1 if your system has a GNU libc compatible `realloc' function,
+   and to 0 otherwise. */
+#undef HAVE_REALLOC
+
+/* Define to 1 if you have the `reallocarray' function. */
+#undef HAVE_REALLOCARRAY
+
+/* Define to 1 if you have the `realpath' function. */
+#undef HAVE_REALPATH
+
+/* Define to 1 if you have the `recallocarray' function. */
+#undef HAVE_RECALLOCARRAY
+
+/* Define to 1 if you have the `recvmsg' function. */
+#undef HAVE_RECVMSG
+
+/* sys/resource.h has RLIMIT_NPROC */
+#undef HAVE_RLIMIT_NPROC
+
+/* Define to 1 if you have the <rpc/types.h> header file. */
+#undef HAVE_RPC_TYPES_H
+
+/* Define to 1 if you have the `rresvport_af' function. */
+#undef HAVE_RRESVPORT_AF
+
+/* Define to 1 if you have the `RSA_generate_key_ex' function. */
+#undef HAVE_RSA_GENERATE_KEY_EX
+
+/* Define to 1 if you have the `RSA_get_default_method' function. */
+#undef HAVE_RSA_GET_DEFAULT_METHOD
+
+/* Define to 1 if you have the <sandbox.h> header file. */
+#undef HAVE_SANDBOX_H
+
+/* Define to 1 if you have the `sandbox_init' function. */
+#undef HAVE_SANDBOX_INIT
+
+/* define if you have sa_family_t data type */
+#undef HAVE_SA_FAMILY_T
+
+/* Define to 1 if you have the `scan_scaled' function. */
+#undef HAVE_SCAN_SCALED
+
+/* Define if you have SecureWare-based protected password database */
+#undef HAVE_SECUREWARE
+
+/* Define to 1 if you have the <security/pam_appl.h> header file. */
+#undef HAVE_SECURITY_PAM_APPL_H
+
+/* Define to 1 if you have the `sendmsg' function. */
+#undef HAVE_SENDMSG
+
+/* Define to 1 if you have the `setauthdb' function. */
+#undef HAVE_SETAUTHDB
+
+/* Define to 1 if you have the `setdtablesize' function. */
+#undef HAVE_SETDTABLESIZE
+
+/* Define to 1 if you have the `setegid' function. */
+#undef HAVE_SETEGID
+
+/* Define to 1 if you have the `setenv' function. */
+#undef HAVE_SETENV
+
+/* Define to 1 if you have the `seteuid' function. */
+#undef HAVE_SETEUID
+
+/* Define to 1 if you have the `setgroupent' function. */
+#undef HAVE_SETGROUPENT
+
+/* Define to 1 if you have the `setgroups' function. */
+#undef HAVE_SETGROUPS
+
+/* Define to 1 if you have the `setlinebuf' function. */
+#undef HAVE_SETLINEBUF
+
+/* Define to 1 if you have the `setlogin' function. */
+#undef HAVE_SETLOGIN
+
+/* Define to 1 if you have the `setluid' function. */
+#undef HAVE_SETLUID
+
+/* Define to 1 if you have the `setpassent' function. */
+#undef HAVE_SETPASSENT
+
+/* Define to 1 if you have the `setpcred' function. */
+#undef HAVE_SETPCRED
+
+/* Define to 1 if you have the `setpflags' function. */
+#undef HAVE_SETPFLAGS
+
+/* Define to 1 if you have the `setppriv' function. */
+#undef HAVE_SETPPRIV
+
+/* Define to 1 if you have the `setproctitle' function. */
+#undef HAVE_SETPROCTITLE
+
+/* Define to 1 if you have the `setregid' function. */
+#undef HAVE_SETREGID
+
+/* Define to 1 if you have the `setresgid' function. */
+#undef HAVE_SETRESGID
+
+/* Define to 1 if you have the `setresuid' function. */
+#undef HAVE_SETRESUID
+
+/* Define to 1 if you have the `setreuid' function. */
+#undef HAVE_SETREUID
+
+/* Define to 1 if you have the `setrlimit' function. */
+#undef HAVE_SETRLIMIT
+
+/* Define to 1 if you have the `setsid' function. */
+#undef HAVE_SETSID
+
+/* Define to 1 if you have the `setutent' function. */
+#undef HAVE_SETUTENT
+
+/* Define to 1 if you have the `setutxdb' function. */
+#undef HAVE_SETUTXDB
+
+/* Define to 1 if you have the `setutxent' function. */
+#undef HAVE_SETUTXENT
+
+/* Define to 1 if you have the `setvbuf' function. */
+#undef HAVE_SETVBUF
+
+/* Define to 1 if you have the `set_id' function. */
+#undef HAVE_SET_ID
+
+/* Define to 1 if you have the `SHA256Update' function. */
+#undef HAVE_SHA256UPDATE
+
+/* Define to 1 if you have the <sha2.h> header file. */
+#undef HAVE_SHA2_H
+
+/* Define to 1 if you have the `SHA384Update' function. */
+#undef HAVE_SHA384UPDATE
+
+/* Define to 1 if you have the `SHA512Update' function. */
+#undef HAVE_SHA512UPDATE
+
+/* Define to 1 if you have the <shadow.h> header file. */
+#undef HAVE_SHADOW_H
+
+/* Define to 1 if you have the `sigaction' function. */
+#undef HAVE_SIGACTION
+
+/* Define to 1 if the system has the type `sighandler_t'. */
+#undef HAVE_SIGHANDLER_T
+
+/* Define to 1 if you have the `sigvec' function. */
+#undef HAVE_SIGVEC
+
+/* Define to 1 if the system has the type `sig_atomic_t'. */
+#undef HAVE_SIG_ATOMIC_T
+
+/* define if you have size_t data type */
+#undef HAVE_SIZE_T
+
+/* Define to 1 if you have the `snprintf' function. */
+#undef HAVE_SNPRINTF
+
+/* Define to 1 if you have the `socketpair' function. */
+#undef HAVE_SOCKETPAIR
+
+/* Have PEERCRED socket option */
+#undef HAVE_SO_PEERCRED
+
+/* define if you have ssize_t data type */
+#undef HAVE_SSIZE_T
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE_SS_FAMILY_IN_SS
+
+/* Define if you have ut_ss in utmpx.h */
+#undef HAVE_SS_IN_UTMPX
+
+/* Define to 1 if you have the `statfs' function. */
+#undef HAVE_STATFS
+
+/* Define to 1 if you have the `statvfs' function. */
+#undef HAVE_STATVFS
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#undef HAVE_STDIO_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasestr' function. */
+#undef HAVE_STRCASESTR
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the `strftime' function. */
+#undef HAVE_STRFTIME
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcat' function. */
+#undef HAVE_STRLCAT
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if you have the `strmode' function. */
+#undef HAVE_STRMODE
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
+/* Define to 1 if you have the `strnvis' function. */
+#undef HAVE_STRNVIS
+
+/* Define to 1 if you have the `strptime' function. */
+#undef HAVE_STRPTIME
+
+/* Define to 1 if you have the `strsep' function. */
+#undef HAVE_STRSEP
+
+/* Define to 1 if you have the `strsignal' function. */
+#undef HAVE_STRSIGNAL
+
+/* Define to 1 if you have the `strtoll' function. */
+#undef HAVE_STRTOLL
+
+/* Define to 1 if you have the `strtonum' function. */
+#undef HAVE_STRTONUM
+
+/* Define to 1 if you have the `strtoul' function. */
+#undef HAVE_STRTOUL
+
+/* Define to 1 if you have the `strtoull' function. */
+#undef HAVE_STRTOULL
+
+/* define if you have struct addrinfo data type */
+#undef HAVE_STRUCT_ADDRINFO
+
+/* Define to 1 if `d_type' is a member of `struct dirent'. */
+#undef HAVE_STRUCT_DIRENT_D_TYPE
+
+/* define if you have struct in6_addr data type */
+#undef HAVE_STRUCT_IN6_ADDR
+
+/* Define to 1 if `pw_change' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CHANGE
+
+/* Define to 1 if `pw_class' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_CLASS
+
+/* Define to 1 if `pw_expire' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_EXPIRE
+
+/* Define to 1 if `pw_gecos' is a member of `struct passwd'. */
+#undef HAVE_STRUCT_PASSWD_PW_GECOS
+
+/* Define to 1 if `fd' is a member of `struct pollfd'. */
+#undef HAVE_STRUCT_POLLFD_FD
+
+/* define if you have struct sockaddr_in6 data type */
+#undef HAVE_STRUCT_SOCKADDR_IN6
+
+/* Define to 1 if `sin6_scope_id' is a member of `struct sockaddr_in6'. */
+#undef HAVE_STRUCT_SOCKADDR_IN6_SIN6_SCOPE_ID
+
+/* define if you have struct sockaddr_storage data type */
+#undef HAVE_STRUCT_SOCKADDR_STORAGE
+
+/* Define to 1 if `f_files' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FILES
+
+/* Define to 1 if `f_flags' is a member of `struct statfs'. */
+#undef HAVE_STRUCT_STATFS_F_FLAGS
+
+/* Define to 1 if `st_blksize' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_BLKSIZE
+
+/* Define to 1 if `st_mtim' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIM
+
+/* Define to 1 if `st_mtime' is a member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_MTIME
+
+/* define if you have struct timespec */
+#undef HAVE_STRUCT_TIMESPEC
+
+/* define if you have struct timeval */
+#undef HAVE_STRUCT_TIMEVAL
+
+/* Define to 1 if you have the `sysconf' function. */
+#undef HAVE_SYSCONF
+
+/* Define if you have syslen in utmpx.h */
+#undef HAVE_SYSLEN_IN_UTMPX
+
+/* Define to 1 if you have the <sys/audit.h> header file. */
+#undef HAVE_SYS_AUDIT_H
+
+/* Define to 1 if you have the <sys/bitypes.h> header file. */
+#undef HAVE_SYS_BITYPES_H
+
+/* Define to 1 if you have the <sys/bsdtty.h> header file. */
+#undef HAVE_SYS_BSDTTY_H
+
+/* Define to 1 if you have the <sys/byteorder.h> header file. */
+#undef HAVE_SYS_BYTEORDER_H
+
+/* Define to 1 if you have the <sys/capsicum.h> header file. */
+#undef HAVE_SYS_CAPSICUM_H
+
+/* Define to 1 if you have the <sys/cdefs.h> header file. */
+#undef HAVE_SYS_CDEFS_H
+
+/* Define to 1 if you have the <sys/dir.h> header file. */
+#undef HAVE_SYS_DIR_H
+
+/* Define if your system defines sys_errlist[] */
+#undef HAVE_SYS_ERRLIST
+
+/* Define to 1 if you have the <sys/file.h> header file. */
+#undef HAVE_SYS_FILE_H
+
+/* Define to 1 if you have the <sys/label.h> header file. */
+#undef HAVE_SYS_LABEL_H
+
+/* Define to 1 if you have the <sys/mman.h> header file. */
+#undef HAVE_SYS_MMAN_H
+
+/* Define to 1 if you have the <sys/mount.h> header file. */
+#undef HAVE_SYS_MOUNT_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file. */
+#undef HAVE_SYS_NDIR_H
+
+/* Define if your system defines sys_nerr */
+#undef HAVE_SYS_NERR
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/poll.h> header file. */
+#undef HAVE_SYS_POLL_H
+
+/* Define to 1 if you have the <sys/prctl.h> header file. */
+#undef HAVE_SYS_PRCTL_H
+
+/* Define to 1 if you have the <sys/procctl.h> header file. */
+#undef HAVE_SYS_PROCCTL_H
+
+/* Define to 1 if you have the <sys/pstat.h> header file. */
+#undef HAVE_SYS_PSTAT_H
+
+/* Define to 1 if you have the <sys/ptms.h> header file. */
+#undef HAVE_SYS_PTMS_H
+
+/* Define to 1 if you have the <sys/ptrace.h> header file. */
+#undef HAVE_SYS_PTRACE_H
+
+/* Define to 1 if you have the <sys/random.h> header file. */
+#undef HAVE_SYS_RANDOM_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/statvfs.h> header file. */
+#undef HAVE_SYS_STATVFS_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/stream.h> header file. */
+#undef HAVE_SYS_STREAM_H
+
+/* Define to 1 if you have the <sys/stropts.h> header file. */
+#undef HAVE_SYS_STROPTS_H
+
+/* Define to 1 if you have the <sys/strtio.h> header file. */
+#undef HAVE_SYS_STRTIO_H
+
+/* Define to 1 if you have the <sys/sysctl.h> header file. */
+#undef HAVE_SYS_SYSCTL_H
+
+/* Force use of sys/syslog.h on Ultrix */
+#undef HAVE_SYS_SYSLOG_H
+
+/* Define to 1 if you have the <sys/sysmacros.h> header file. */
+#undef HAVE_SYS_SYSMACROS_H
+
+/* Define to 1 if you have the <sys/timers.h> header file. */
+#undef HAVE_SYS_TIMERS_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/un.h> header file. */
+#undef HAVE_SYS_UN_H
+
+/* Define to 1 if you have the <sys/vfs.h> header file. */
+#undef HAVE_SYS_VFS_H
+
+/* Define to 1 if you have the `tcgetpgrp' function. */
+#undef HAVE_TCGETPGRP
+
+/* Define to 1 if you have the `tcsendbreak' function. */
+#undef HAVE_TCSENDBREAK
+
+/* Define to 1 if you have the `time' function. */
+#undef HAVE_TIME
+
+/* Define to 1 if you have the `timegm' function. */
+#undef HAVE_TIMEGM
+
+/* Define to 1 if you have the <time.h> header file. */
+#undef HAVE_TIME_H
+
+/* Define if you have ut_time in utmp.h */
+#undef HAVE_TIME_IN_UTMP
+
+/* Define if you have ut_time in utmpx.h */
+#undef HAVE_TIME_IN_UTMPX
+
+/* Define to 1 if you have the `timingsafe_bcmp' function. */
+#undef HAVE_TIMINGSAFE_BCMP
+
+/* Define to 1 if you have the <tmpdir.h> header file. */
+#undef HAVE_TMPDIR_H
+
+/* Define to 1 if you have the `truncate' function. */
+#undef HAVE_TRUNCATE
+
+/* Define to 1 if you have the <ttyent.h> header file. */
+#undef HAVE_TTYENT_H
+
+/* Define if you have ut_tv in utmp.h */
+#undef HAVE_TV_IN_UTMP
+
+/* Define if you have ut_tv in utmpx.h */
+#undef HAVE_TV_IN_UTMPX
+
+/* Define if you have ut_type in utmp.h */
+#undef HAVE_TYPE_IN_UTMP
+
+/* Define if you have ut_type in utmpx.h */
+#undef HAVE_TYPE_IN_UTMPX
+
+/* Define to 1 if you have the <ucred.h> header file. */
+#undef HAVE_UCRED_H
+
+/* Define to 1 if the system has the type `uintmax_t'. */
+#undef HAVE_UINTMAX_T
+
+/* define if you have uintxx_t data type */
+#undef HAVE_UINTXX_T
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `unlinkat' function. */
+#undef HAVE_UNLINKAT
+
+/* Define to 1 if you have the `unsetenv' function. */
+#undef HAVE_UNSETENV
+
+/* Define to 1 if the system has the type `unsigned long long'. */
+#undef HAVE_UNSIGNED_LONG_LONG
+
+/* Define to 1 if you have the `unveil' function. */
+#undef HAVE_UNVEIL
+
+/* Define to 1 if you have the `updwtmp' function. */
+#undef HAVE_UPDWTMP
+
+/* Define to 1 if you have the `updwtmpx' function. */
+#undef HAVE_UPDWTMPX
+
+/* Define to 1 if you have the <usersec.h> header file. */
+#undef HAVE_USERSEC_H
+
+/* Define to 1 if you have the `user_from_uid' function. */
+#undef HAVE_USER_FROM_UID
+
+/* Define to 1 if you have the `usleep' function. */
+#undef HAVE_USLEEP
+
+/* Define to 1 if you have the <util.h> header file. */
+#undef HAVE_UTIL_H
+
+/* Define to 1 if you have the `utimensat' function. */
+#undef HAVE_UTIMENSAT
+
+/* Define to 1 if you have the `utimes' function. */
+#undef HAVE_UTIMES
+
+/* Define to 1 if you have the <utime.h> header file. */
+#undef HAVE_UTIME_H
+
+/* Define to 1 if you have the `utmpname' function. */
+#undef HAVE_UTMPNAME
+
+/* Define to 1 if you have the `utmpxname' function. */
+#undef HAVE_UTMPXNAME
+
+/* Define to 1 if you have the <utmpx.h> header file. */
+#undef HAVE_UTMPX_H
+
+/* Define to 1 if you have the <utmp.h> header file. */
+#undef HAVE_UTMP_H
+
+/* define if you have u_char data type */
+#undef HAVE_U_CHAR
+
+/* define if you have u_int data type */
+#undef HAVE_U_INT
+
+/* define if you have u_int64_t data type */
+#undef HAVE_U_INT64_T
+
+/* define if you have u_intxx_t data type */
+#undef HAVE_U_INTXX_T
+
+/* Define to 1 if you have the `vasprintf' function. */
+#undef HAVE_VASPRINTF
+
+/* Define if va_copy exists */
+#undef HAVE_VA_COPY
+
+/* Define to 1 if you have the <vis.h> header file. */
+#undef HAVE_VIS_H
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#undef HAVE_VSNPRINTF
+
+/* Define to 1 if you have the `waitpid' function. */
+#undef HAVE_WAITPID
+
+/* Define to 1 if you have the `warn' function. */
+#undef HAVE_WARN
+
+/* Define to 1 if you have the <wchar.h> header file. */
+#undef HAVE_WCHAR_H
+
+/* Define to 1 if you have the `wcwidth' function. */
+#undef HAVE_WCWIDTH
+
+/* Define to 1 if you have the `_getlong' function. */
+#undef HAVE__GETLONG
+
+/* Define to 1 if you have the `_getpty' function. */
+#undef HAVE__GETPTY
+
+/* Define to 1 if you have the `_getshort' function. */
+#undef HAVE__GETSHORT
+
+/* Define if you have struct __res_state _res as an extern */
+#undef HAVE__RES_EXTERN
+
+/* Define to 1 if you have the `__b64_ntop' function. */
+#undef HAVE___B64_NTOP
+
+/* Define to 1 if you have the `__b64_pton' function. */
+#undef HAVE___B64_PTON
+
+/* Define if compiler implements __FUNCTION__ */
+#undef HAVE___FUNCTION__
+
+/* Define if libc defines __progname */
+#undef HAVE___PROGNAME
+
+/* Fields in struct sockaddr_storage */
+#undef HAVE___SS_FAMILY_IN_SS
+
+/* Define if __va_copy exists */
+#undef HAVE___VA_COPY
+
+/* Define if compiler implements __func__ */
+#undef HAVE___func__
+
+/* Define this if you are using the Heimdal version of Kerberos V5 */
+#undef HEIMDAL
+
+/* Define if you need to use IP address instead of hostname in $DISPLAY */
+#undef IPADDR_IN_DISPLAY
+
+/* Detect IPv4 in IPv6 mapped addresses and treat as IPv4 */
+#undef IPV4_IN_IPV6
+
+/* Define if your system choked on IP TOS setting */
+#undef IP_TOS_IS_BROKEN
+
+/* Define if you want Kerberos 5 support */
+#undef KRB5
+
+/* Define if pututxline updates lastlog too */
+#undef LASTLOG_WRITE_PUTUTXLINE
+
+/* Define to whatever link() returns for "not supported" if it doesn't return
+   EOPNOTSUPP. */
+#undef LINK_OPNOTSUPP_ERRNO
+
+/* Lock all memory to protect sshd against Linux kcompactd */
+#undef LINUX_MEMLOCK_ONFAULT
+
+/* Adjust Linux out-of-memory killer */
+#undef LINUX_OOM_ADJUST
+
+/* max value of long long calculated by configure */
+#undef LLONG_MAX
+
+/* min value of long long calculated by configure */
+#undef LLONG_MIN
+
+/* Account locked with pw(1) */
+#undef LOCKED_PASSWD_PREFIX
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_STRING
+
+/* String used in /etc/passwd to denote locked account */
+#undef LOCKED_PASSWD_SUBSTR
+
+/* Some systems need a utmpx entry for /bin/login to work */
+#undef LOGIN_NEEDS_UTMPX
+
+/* Set this to your mail directory if you do not have _PATH_MAILDIR */
+#undef MAIL_DIRECTORY
+
+/* Define if your compiler lacks __builtin_popcount */
+#undef MISSING_BUILTIN_POPCOUNT
+
+/* Need setpgrp to for controlling tty */
+#undef NEED_SETPGRP
+
+/* compiler does not accept __attribute__ on prototype args */
+#undef NO_ATTRIBUTE_ON_PROTOTYPE_ARGS
+
+/* compiler does not accept __attribute__ on return types */
+#undef NO_ATTRIBUTE_ON_RETURN_TYPE
+
+/* SA_RESTARTed signals do no interrupt select */
+#undef NO_SA_RESTART
+
+/* Define to disable UID restoration test */
+#undef NO_UID_RESTORATION_TEST
+
+/* Define if X11 doesn't support AF_UNIX sockets on that system */
+#undef NO_X11_UNIX_SOCKETS
+
+/* Define if EVP_DigestUpdate returns void */
+#undef OPENSSL_EVP_DIGESTUPDATE_VOID
+
+/* OpenSSL has ECC */
+#undef OPENSSL_HAS_ECC
+
+/* libcrypto has ed25519 support */
+#undef OPENSSL_HAS_ED25519
+
+/* libcrypto has NID_X9_62_prime256v1 */
+#undef OPENSSL_HAS_NISTP256
+
+/* libcrypto has NID_secp384r1 */
+#undef OPENSSL_HAS_NISTP384
+
+/* libcrypto has NID_secp521r1 */
+#undef OPENSSL_HAS_NISTP521
+
+/* libcrypto is missing AES 192 and 256 bit functions */
+#undef OPENSSL_LOBOTOMISED_AES
+
+/* Define if you want the OpenSSL internally seeded PRNG only */
+#undef OPENSSL_PRNG_ONLY
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define if you are using Solaris-derived PAM which passes pam_messages to
+   the conversation function with an extra level of indirection */
+#undef PAM_SUN_CODEBASE
+
+/* Work around problematic Linux PAM modules handling of PAM_TTY */
+#undef PAM_TTY_KLUDGE
+
+/* must supply username to passwd */
+#undef PASSWD_NEEDS_USERNAME
+
+/* System dirs owned by bin (uid 2) */
+#undef PLATFORM_SYS_DIR_UID
+
+/* need inet in pledge for setsockopt IP_TOS */
+#undef PLEDGE_EXTRA_INET
+
+/* Define if poll 2nd arg is ulong */
+#undef POLL_NFDS_T_ULONG
+
+/* Port number of PRNGD/EGD random number socket */
+#undef PRNGD_PORT
+
+/* Location of PRNGD/EGD random number socket */
+#undef PRNGD_SOCKET
+
+/* read(1) can return 0 for a non-closed fd */
+#undef PTY_ZEROREAD
+
+/* Sandbox using capsicum */
+#undef SANDBOX_CAPSICUM
+
+/* Sandbox using Darwin sandbox_init(3) */
+#undef SANDBOX_DARWIN
+
+/* no privsep sandboxing */
+#undef SANDBOX_NULL
+
+/* Sandbox using setrlimit(2) */
+#undef SANDBOX_RLIMIT
+
+/* Sandbox using seccomp filter */
+#undef SANDBOX_SECCOMP_FILTER
+
+/* setrlimit RLIMIT_FSIZE works */
+#undef SANDBOX_SKIP_RLIMIT_FSIZE
+
+/* define if setrlimit RLIMIT_NOFILE breaks things */
+#undef SANDBOX_SKIP_RLIMIT_NOFILE
+
+/* Sandbox using Solaris/Illumos privileges */
+#undef SANDBOX_SOLARIS
+
+/* Specify the system call convention in use */
+#undef SECCOMP_AUDIT_ARCH
+
+/* Define if your platform breaks doing a seteuid before a setuid */
+#undef SETEUID_BREAKS_SETUID
+
+/* The size of `int', as computed by sizeof. */
+#undef SIZEOF_INT
+
+/* The size of `long int', as computed by sizeof. */
+#undef SIZEOF_LONG_INT
+
+/* The size of `long long int', as computed by sizeof. */
+#undef SIZEOF_LONG_LONG_INT
+
+/* The size of `short int', as computed by sizeof. */
+#undef SIZEOF_SHORT_INT
+
+/* The size of `time_t', as computed by sizeof. */
+#undef SIZEOF_TIME_T
+
+/* Define as const if snprintf() can declare const char *fmt */
+#undef SNPRINTF_CONST
+
+/* sockaddr_in has sin_len */
+#undef SOCK_HAS_LEN
+
+/* Define to a Set Process Title type if your system is supported by
+   bsd-setproctitle.c */
+#undef SPT_TYPE
+
+/* Define if sshd somehow reacquires a controlling TTY after setsid() */
+#undef SSHD_ACQUIRES_CTTY
+
+/* sshd PAM service name */
+#undef SSHD_PAM_SERVICE
+
+/* Use audit debugging module */
+#undef SSH_AUDIT_EVENTS
+
+/* Windows is sensitive to read buffer size */
+#undef SSH_IOBUFSZ
+
+/* non-privileged user for privilege separation */
+#undef SSH_PRIVSEP_USER
+
+/* Use tunnel device compatibility to OpenBSD */
+#undef SSH_TUN_COMPAT_AF
+
+/* Open tunnel devices the FreeBSD way */
+#undef SSH_TUN_FREEBSD
+
+/* Open tunnel devices the Linux tun/tap way */
+#undef SSH_TUN_LINUX
+
+/* No layer 2 tunnel support */
+#undef SSH_TUN_NO_L2
+
+/* Open tunnel devices the OpenBSD way */
+#undef SSH_TUN_OPENBSD
+
+/* Prepend the address family to IP tunnel traffic */
+#undef SSH_TUN_PREPEND_AF
+
+/* Define to 1 if all of the C90 standard headers exist (not just the ones
+   required in a freestanding environment). This macro is provided for
+   backward compatibility; new code need not use it. */
+#undef STDC_HEADERS
+
+/* Define if you want a different $PATH for the superuser */
+#undef SUPERUSER_PATH
+
+/* syslog_r function is safe to use in in a signal handler */
+#undef SYSLOG_R_SAFE_IN_SIGHAND
+
+/* Have sshd notify systemd on start/reload */
+#undef SYSTEMD_NOTIFY
+
+/* Support routing domains using Linux VRF */
+#undef SYS_RDOMAIN_LINUX
+
+/* Support passwords > 8 chars */
+#undef UNIXWARE_LONG_PASSWORDS
+
+/* Specify default $PATH */
+#undef USER_PATH
+
+/* Define this if you want to use libkafs' AFS support */
+#undef USE_AFS
+
+/* Use BSM audit module */
+#undef USE_BSM_AUDIT
+
+/* Use btmp to log bad logins */
+#undef USE_BTMP
+
+/* Use libedit for sftp */
+#undef USE_LIBEDIT
+
+/* Use Linux audit module */
+#undef USE_LINUX_AUDIT
+
+/* Enable OpenSSL engine support */
+#undef USE_OPENSSL_ENGINE
+
+/* Define if you want to enable PAM support */
+#undef USE_PAM
+
+/* Use PIPES instead of a socketpair() */
+#undef USE_PIPES
+
+/* Define if you have Solaris privileges */
+#undef USE_SOLARIS_PRIVS
+
+/* Define if you have Solaris process contracts */
+#undef USE_SOLARIS_PROCESS_CONTRACTS
+
+/* Define if you have Solaris projects */
+#undef USE_SOLARIS_PROJECTS
+
+/* Use libwtmpdb for sshd */
+#undef USE_WTMPDB
+
+/* compiler variable declarations after code */
+#undef VARIABLE_DECLARATION_AFTER_CODE
+
+/* compiler supports variable length arrays */
+#undef VARIABLE_LENGTH_ARRAYS
+
+/* Define if you shouldn't strip 'tty' from your ttyname in [uw]tmp */
+#undef WITH_ABBREV_NO_TTY
+
+/* Define if you want to enable AIX4's authenticate function */
+#undef WITH_AIXAUTHENTICATE
+
+/* Define if you have/want arrays (cluster-wide session management, not C
+   arrays) */
+#undef WITH_IRIX_ARRAY
+
+/* Define if you want IRIX audit trails */
+#undef WITH_IRIX_AUDIT
+
+/* Define if you want IRIX kernel jobs */
+#undef WITH_IRIX_JOBS
+
+/* Define if you want IRIX project management */
+#undef WITH_IRIX_PROJECT
+
+/* use libcrypto for cryptography */
+#undef WITH_OPENSSL
+
+/* Define if you want SELinux support. */
+#undef WITH_SELINUX
+
+/* Enable zlib */
+#undef WITH_ZLIB
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+#  define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+#  undef WORDS_BIGENDIAN
+# endif
+#endif
+
+/* Define if xauth is found in your path */
+#undef XAUTH_PATH
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* log for bad login attempts */
+#undef _PATH_BTMP
+
+/* Full path of your "passwd" program */
+#undef _PATH_PASSWD_PROG
+
+/* Specify location of ssh.pid */
+#undef _PATH_SSH_PIDDIR
+
+/* Define if we don't have struct __res_state in resolv.h */
+#undef __res_state
+
+/* Define to rpl_calloc if the replacement function should be used. */
+#undef calloc
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
+
+/* Define to rpl_realloc if the replacement function should be used. */
+#undef realloc
+
+/* type to use in place of socklen_t if not defined */
+#undef socklen_t
--- a/configure~	1970-01-01 04:00:00.000000000 +0400
+++ b/configure~	2026-04-02 12:09:03.000000000 +0400
@@ -0,0 +1,28438 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.71 for OpenSSH Portable.
+#
+# Report bugs to <openssh-unix-dev@mindrot.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
+# Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
+if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else $as_nop
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+
+# Reset variables that may have inherited troublesome values from
+# the environment.
+
+# IFS needs to be set, to space, tab, and newline, in precisely that order.
+# (If _AS_PATH_WALK were called with IFS unset, it would have the
+# side effect of setting IFS to empty, thus disabling word splitting.)
+# Quoting is to prevent editors from complaining about space-tab.
+as_nl='
+'
+export as_nl
+IFS=" ""	$as_nl"
+
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# Ensure predictable behavior from utilities with locale-dependent output.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# We cannot yet rely on "unset" to work, but we need these variables
+# to be unset--not just set to an empty or harmless value--now, to
+# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh).  This construct
+# also avoids known problems related to "unset" and subshell syntax
+# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
+for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
+do eval test \${$as_var+y} \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+
+# Ensure that fds 0, 1, and 2 are open.
+if (exec 3>&0) 2>/dev/null; then :; else exec 0</dev/null; fi
+if (exec 3>&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
+if (exec 3>&2)            ; then :; else exec 2>/dev/null; fi
+
+# The user is always right.
+if ${PATH_SEPARATOR+false} :; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    test -r "$as_dir$0" && as_myself=$as_dir$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="as_nop=:
+if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else \$as_nop
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" )
+then :
+
+else \$as_nop
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+blah=\$(echo \$(echo blah))
+test x\"\$blah\" = xblah || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null
+then :
+  as_have_required=yes
+else $as_nop
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null
+then :
+
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null
+then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+IFS=$as_save_IFS
+if $as_found
+then :
+
+else $as_nop
+  if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null
+then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi
+fi
+
+
+      if test "x$CONFIG_SHELL" != x
+then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno
+then :
+  printf "%s\n" "$0: This script requires a shell more modern than all"
+  printf "%s\n" "$0: the shells that I found on your system."
+  if test ${ZSH_VERSION+y} ; then
+    printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and
+$0: openssh-unix-dev@mindrot.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
+then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else $as_nop
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
+then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else $as_nop
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  printf "%s\n" "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+# Determine whether it's possible to make 'echo' print without a newline.
+# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
+# for compatibility with existing Makefiles.
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+# For backward compatibility with old third-party macros, we provide
+# the shell variables $as_echo and $as_echo_n.  New code should use
+# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
+as_echo='printf %s\n'
+as_echo_n='printf %s'
+
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='OpenSSH'
+PACKAGE_TARNAME='openssh'
+PACKAGE_VERSION='Portable'
+PACKAGE_STRING='OpenSSH Portable'
+PACKAGE_BUGREPORT='openssh-unix-dev@mindrot.org'
+PACKAGE_URL=''
+
+ac_unique_file="ssh.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stddef.h>
+#ifdef HAVE_STDIO_H
+# include <stdio.h>
+#endif
+#ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+#ifdef HAVE_STRING_H
+# include <string.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_header_c_list=
+ac_subst_vars='LTLIBOBJS
+COMPATINCLUDES
+CFLAGS_NOPIE
+LDFLAGS_NOPIE
+TMUX
+DROPBEARCONVERT
+DROPBEARKEY
+DBCLIENT
+DROPBEAR
+CONCH
+PUTTYGEN
+PLINK
+DEPEND
+UNSUPPORTED_ALGORITHMS
+TEST_MALLOC_OPTIONS
+TEST_SSH_UTF8
+TEST_SSH_IPV6
+piddir
+user_path
+mansubdir
+MANTYPE
+XAUTH_PATH
+STRIP_OPT
+xauth_path
+PRIVSEP_PATH
+CHANNELLIBS
+K5LIBS
+GSSLIBS
+KRB5CONF
+SSHDLIBS
+SSH_PRIVSEP_USER
+SK_STANDALONE
+LIBFIDO2
+SK_DUMMY_LIBRARY
+OPENSSL_BIN
+openssl_bin
+PICFLAG
+LIBWTMPDB
+LIBEDIT
+LDNSCONFIG
+LIBOBJS
+TESTLIBS
+LD
+PATH_PASSWD_PROG
+STARTUP_SCRIPT_SHELL
+MAKE_PACKAGE_SUPPORTED
+PATH_USERADD_PROG
+PATH_GROUPADD_PROG
+MANFMT
+TEST_SHELL
+PKGCONFIG
+MANDOC
+NROFF
+GROFF
+SH
+TEST_MINUS_S_SH
+SED
+KILL
+CAT
+ac_ct_AR
+AR
+MKDIR_P
+EGREP
+GREP
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+RANLIB
+CPP
+AWK
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+runstatedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_largefile
+with_openssl
+with_stackprotect
+with_hardening
+with_retpoline
+with_rpath
+with_cflags
+with_cflags_after
+with_cppflags
+with_ldflags
+with_ldflags_after
+with_libs
+with_Werror
+with_linux_memlock_onfault
+with_solaris_contracts
+with_solaris_projects
+with_solaris_privs
+with_osfsia
+with_zlib
+with_zlib_version_check
+with_ldns
+with_libedit
+with_wtmpdb
+with_audit
+with_pie
+enable_pkcs11
+enable_security_key
+with_security_key_builtin
+with_security_key_standalone
+with_ssl_dir
+with_openssl_header_check
+with_ssl_engine
+with_prngd_port
+with_prngd_socket
+with_pam
+with_pam_service
+with_privsep_user
+with_sandbox
+with_selinux
+with_kerberos5
+with_privsep_path
+with_xauth
+enable_strip
+with_maildir
+with_mantype
+with_shadow
+with_ipaddr_display
+enable_etc_default_login
+with_default_path
+with_superuser_path
+with_4in6
+with_bsd_auth
+with_pid_dir
+enable_fd_passing
+enable_lastlog
+enable_utmp
+enable_utmpx
+enable_wtmp
+enable_wtmpx
+enable_libutil
+enable_pututline
+enable_pututxline
+with_lastlog
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir runstatedir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures OpenSSH Portable to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/openssh]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of OpenSSH Portable:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-largefile     omit support for large files
+  --disable-pkcs11        disable PKCS#11 support code [no]
+  --disable-security-key  disable U2F/FIDO support code no
+  --disable-strip         Disable calling strip(1) on install
+  --disable-etc-default-login Disable using PATH from /etc/default/login no
+  --disable-fd-passing    disable file descriptor passsing no
+  --disable-lastlog       disable use of lastlog even if detected no
+  --disable-utmp          disable use of utmp even if detected no
+  --disable-utmpx         disable use of utmpx even if detected no
+  --disable-wtmp          disable use of wtmp even if detected no
+  --disable-wtmpx         disable use of wtmpx even if detected no
+  --disable-libutil       disable use of libutil (login() etc.) no
+  --disable-pututline     disable use of pututline() etc. (uwtmp) no
+  --disable-pututxline    disable use of pututxline() etc. (uwtmpx) no
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --without-openssl       Disable use of OpenSSL; use only limited internal crypto **EXPERIMENTAL**
+  --without-stackprotect  Don't use compiler's stack protection
+  --without-hardening     Don't use toolchain hardening flags
+  --without-retpoline     Enable retpoline spectre mitigation
+  --without-rpath         Disable auto-added -R linker paths
+  --with-cflags           Specify additional flags to pass to compiler
+  --with-cflags-after     Specify additional flags to pass to compiler after configure
+  --with-cppflags         Specify additional flags to pass to preprocessor
+  --with-ldflags          Specify additional flags to pass to linker
+  --with-ldflags-after    Specify additional flags to pass to linker after configure
+  --with-libs             Specify additional libraries to link with
+  --with-Werror           Build main code with -Werror
+  --with-linux-memlock-onfault Enables memory locking on Linux
+  --with-solaris-contracts Enable Solaris process contracts (experimental)
+  --with-solaris-projects Enable Solaris projects (experimental)
+  --with-solaris-privs    Enable Solaris/Illumos privileges (experimental)
+  --with-osfsia           Enable Digital Unix SIA
+  --with-zlib=PATH        Use zlib in PATH
+  --without-zlib-version-check Disable zlib version check
+  --with-ldns[=PATH]      Use ldns for DNSSEC support (optionally in PATH)
+  --with-libedit[=PATH]   Enable libedit support for sftp
+  --with-wtmpdb[=PATH]   Enable wtmpdb support for sshd
+  --with-audit=module     Enable audit support (modules=debug,bsm,linux)
+  --with-pie              Build Position Independent Executables if possible
+  --with-security-key-builtin include builtin U2F/FIDO support
+  --with-security-key-standalone build standalone sk-libfido2 SecurityKeyProvider
+  --with-ssl-dir=PATH     Specify path to OpenSSL installation
+  --without-openssl-header-check Disable OpenSSL version consistency check
+  --with-ssl-engine       Enable OpenSSL (hardware) ENGINE support
+  --with-prngd-port=PORT  read entropy from PRNGD/EGD TCP localhost:PORT
+  --with-prngd-socket=FILE read entropy from PRNGD/EGD socket FILE (default=/var/run/egd-pool)
+  --with-pam              Enable PAM support
+  --with-pam-service=name Specify PAM service name
+  --with-privsep-user=user Specify non-privileged user for privilege separation
+  --with-sandbox=style    Specify privilege separation sandbox (no, capsicum, darwin, rlimit, seccomp_filter)
+  --with-selinux          Enable SELinux support
+  --with-kerberos5=PATH   Enable Kerberos 5 support
+  --with-privsep-path=xxx Path for privilege separation chroot (default=/var/empty)
+  --with-xauth=PATH       Specify path to xauth program
+  --with-maildir=/path/to/mail    Specify your system mail directory
+  --with-mantype=man|cat|doc  Set man page type
+  --without-shadow        Disable shadow password support
+  --with-ipaddr-display   Use ip address instead of hostname in $DISPLAY
+  --with-default-path=    Specify default $PATH environment for server
+  --with-superuser-path=  Specify different path for super-user
+  --with-4in6             Check for and convert IPv4 in IPv6 mapped addresses
+  --with-bsd-auth         Enable BSD auth support
+  --with-pid-dir=PATH     Specify location of sshd.pid file
+  --with-lastlog=FILE|DIR specify lastlog location common locations
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <openssh-unix-dev@mindrot.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for configure.gnu first; this name is used for a wrapper for
+    # Metaconfig's "Configure" on case-insensitive file systems.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+OpenSSH configure Portable
+generated by GNU Autoconf 2.71
+
+Copyright (C) 2021 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest.beam
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to run conftest.$ac_ext, and return whether this succeeded. Assumes that
+# executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+printf "%s\n" "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }
+then :
+  ac_retval=0
+else $as_nop
+  printf "%s\n" "$as_me: program exited with status $ac_status" >&5
+       printf "%s\n" "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as

[truncated 1854456 bytes]

Prompt

## Plan Pass

You are planning a fixer patch before any edits happen.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. The original pre-edit snapshot is available at `./source` if you need to inspect it. For interpreter processes, plan from the script/application entrypoint evidence first and include the runtime only as a second investigation target unless the evidence proves a runtime bug.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. Inspect the relevant code, nearby callers, project contribution docs, and local helper/compat APIs, but do not edit files in this pass.

Return a short markdown plan with these exact sections:

## Problem
## Evidence Confidence
## Proposed Subject
## Patch Plan
## Risks
## Validation

Classify `## Evidence Confidence` as exactly one of `reproduced`, `observed`, or `inferred`. Use `inferred` only for a no-patch diagnosis/report plan unless you can name the extra evidence you will collect before editing; inferred source patches are blocked by Fixer because they are not pull-request-ready. For `observed` source-patch plans, plan to say in the final `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. The plan must explain how the proposed code change addresses the observed issue evidence, call out any prior Fixer patch that should be improved or replaced, reject awkward control flow such as avoidable `goto` if there is a cleaner bounded alternative, name any local helper APIs or maintainer conventions the patch should follow, and keep the intended maintainer-facing explanation clear enough that someone unfamiliar with the local complaint wording can still follow the fix. In `## Validation`, name the reproducible configure/build/test entrypoint you will try from the workspace root before any focused leaf compile or smoke check, and include one bounded independent reproduction attempt for the collected failure signal when it is safe and cheap. Do not plan to claim `reproduced` unless that reproduction command or test can actually show the failure.

## Patch Pass

You are working on a bounded fixer proposal.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Produce the smallest reasonable patch for the target repository, keep the change upstreamable, prefer the clearest control flow available, and do not keep avoidable `goto` when a simpler structure would read better. Before introducing new file, process, allocation, locking, networking, or platform APIs, inspect nearby code and project contribution docs for existing helpers or compatibility wrappers and use those local patterns unless you can explain why they do not fit. Validate from a reproducible workspace-root entrypoint before falling back to focused leaf commands; if a build or test cannot run, report the exact command, the exact blocker, and any narrower check you ran instead. During validation, also try one bounded independent reproduction of the collected failure signal when it is safe and cheap, such as a failing test, smoke command, perf/strace comparison, or before/after runtime check. Only use `reproduced` if that command or test actually reproduced the failure; otherwise keep `observed` and report the reproduction blocker. The final explanation must connect the observed issue evidence to the actual code change, not just paraphrase the diff. Write like a maintainer is going to read the patch mail cold: explain the bug in plain language, define subsystem-specific jargon the first time you need it, and make the causal story obvious. Explicitly classify evidence confidence as `reproduced`, `observed`, or `inferred`: `reproduced` means you reproduced the failure locally; `observed` means Fixer has direct crash/log/trace evidence but you did not independently reproduce it; `inferred` means the source patch is not pull-request-ready, so do not leave a source diff unless you first gather stronger observed/reproduced evidence; otherwise return a no-patch diagnosis/report. For any source-changing `observed` patch, say explicitly in `## Issue Connection` that the failure was observed by Fixer and not independently reproduced. If you introduce non-obvious state translation, index remapping, or backend split logic, add a short source comment that explains the invariant being preserved.

Start by explaining the likely root cause from the collected perf, strace, and /proc evidence. If you cannot land a safe patch, leave a diagnosis that is strong enough for an upstream bug report.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround. 

Keep the change narrowly scoped and summarize validation clearly.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

Before editing, read the plan at `./plan-output.txt` and follow it unless the code proves part of it wrong. If you change course, say so explicitly in the final write-up instead of silently drifting from the plan.

## Review Pass 1 (local metadata check)

Local metadata consistency check

## Refinement Pass 1

You are refining a fixer patch after an explicit code review.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it was acquired via `debian-source`. Read the latest author response at `./patch-output.txt`. Read the review report at `./review-1-output.txt`. This is refinement round 1. The original pre-edit snapshot is available at `./source` if you need to compare the current patch against it. Re-read the planning pass at `./plan-output.txt` before editing. The workspace currently changes these repo-relative paths: regress/authorized_keys_root, regress/ecdsa-sha2-nistp256, regress/ecdsa-sha2-nistp256.pub, regress/ecdsa-sha2-nistp384, regress/ecdsa-sha2-nistp384.pub, regress/ecdsa-sha2-nistp521, regress/ecdsa-sha2-nistp521.pub, regress/host.sk-ecdsa-sha2-nistp256@openssh.com, regress/host.sk-ssh-ed25519@openssh.com, regress/log/20260510T053258.446016.ssh.346.log, regress/sk-ecdsa-sha2-nistp256@openssh.com, regress/sk-ecdsa-sha2-nistp256@openssh.com.pub, regress/sk-ssh-ed25519@openssh.com, regress/sk-ssh-ed25519@openssh.com.pub, regress/ssh-ed25519, regress/ssh-ed25519.pub, regress/ssh-rsa, regress/ssh-rsa.pub, regress/sshd-log-wrapper.sh. Either keep that exact set synchronized with `## Git Add Paths` and `## Issue Connection`, or revert any unintended file before you answer.

Upstream-style expectation: before planning or editing, check for contribution/style docs (`CONTRIBUTING`, `HACKING`, `README-hacking`, `README.md`, `docs/`, `dev-docs/`) and scan the touched subsystem for local helpers. If the project has wrappers for file IO, path-relative IO, process spawning, memory allocation, logging, locking, or platform compatibility, prefer those wrappers over generic libc/std APIs. Do not invent a reproducer or user-visible failure that is not in the evidence bundle; if the evidence is profiler-only or indirect, describe it as a targeted mitigation or stop with a diagnosis instead of presenting a speculative patch as a confirmed bug fix. In the plan and final validation, name any such helper, convention, or evidence limit you found, or say that no relevant local helper was found. Treat this as a `openssh` upstream patch, not just a Debian-local workaround.

Validation expectation: try the project-level build/test entrypoint from the workspace root before reporting only a focused leaf compile. Detected candidate(s): `./configure && make`. If the project-level command fails because dependencies or generated files are missing, include the exact command and failure reason in `## Validation`, then run the narrowest relevant compile/test that is still reproducible from a clean checkout. Address the review findings with the smallest reasonable follow-up changes. If the review identifies a runtime or correctness bug in the changed code, you must update the code itself before answering; a metadata-only response is not sufficient. Keep the patch upstream-friendly, use local project helpers and compat APIs when available, avoid awkward control flow when a simpler structure will do, keep the final response gittable, make the maintainer-facing explanation plain and direct, keep `## Evidence Confidence` honest, add short comments for any non-obvious translation or remapping logic, run relevant project-level build/tests from the workspace root before narrower checks when possible, try a bounded independent reproduction command/test if the review or plan shows one is safe, and summarize which review findings you addressed.

In every authoring pass, your final response must start with `Subject: <single-line git commit subject>` and then include these markdown sections exactly:

## Commit Message
A short upstream-friendly explanation of what changed and why. Write it in plain language that a maintainer can follow without local complaint context. If you use subsystem jargon, define it immediately.

## Evidence Confidence
Exactly one word: `reproduced`, `observed`, or `inferred`. Use `reproduced` only when you reproduced the failure locally with a command or test, and include that command/test in `## Validation`. Use `observed` when Fixer has direct crash/log/trace evidence but you did not independently reproduce it. If `## Git Add Paths` lists source files for an `observed` patch, `## Issue Connection` must explicitly say the failure was observed by Fixer and not independently reproduced. Use `inferred` for profiler/strace/indirect evidence; inferred responses may be no-patch diagnoses or reports, but inferred source patches are not pull-request-ready until stronger evidence is gathered.

## Issue Connection
Write this as maintainer-facing patch mail, not as local Fixer notes. Cover four things explicitly in readable sentences: the user-visible symptom or the exact collected signal, the code-level cause or the cautious inference from evidence, the specific change you made, and the expected effect. Do not invent a reproducer, command line, crash, or user-visible failure that is not present in the evidence bundle. If the evidence is direct-but-not-reproduced, say it was observed by Fixer and not independently reproduced. If the evidence is indirect and you did not gather stronger evidence, do not leave a source diff; write a no-patch diagnosis/report instead. Include an explicit effect sentence such as `The expected effect is ...`, `This should reduce ...`, or `This prevents ...` for source patches. If the logic is non-obvious in code, mention that you added a short explanatory comment.

## Git Add Paths
List the repo-relative paths that belong in the final patch, one per line. Use `None` only when you intentionally made no source changes. Include intentionally new files, and do not list generated build artifacts.

## Validation
List the checks you ran, or say clearly that you could not run them. Include the independent reproduction command/test and result when `## Evidence Confidence` is `reproduced`; if reproduction was attempted but blocked, name the exact blocker and keep confidence at `observed` or `inferred`.

## Review Pass 2

You are reviewing a freshly generated fixer patch.

Read the evidence bundle at `./evidence.json`. The prepared workspace is `./workspace` and it

[truncated 3447 bytes]

Response

## Plan Pass

## Problem
Fixer observed an installed Debian `openssh-server` `sshd-session: gis [priv]` process and flagged it as a runaway-process candidate, but the bundled evidence is internally weak for a confirmed OpenSSH busy loop: process state is sleeping, `wchan` is `poll_schedule_timeout`, strace captured only one `restart_syscall`, and total sampled CPU was only 0.3%. The backtrace points through libc `poll()` into OpenSSH monitor-side code, consistent with the privileged monitor waiting in `monitor_read()`.

## Evidence Confidence
observed

## Proposed Subject
No source patch yet: diagnose likely non-actionable idle privileged monitor poll sample.

## Patch Plan
Do not edit files in this pass. Treat the evidence as an observed Fixer signal, not an independently reproduced bug.

Before any future patch, map the installed binary offsets to symbols using debug symbols or a locally rebuilt unstripped `sshd-session`; the current installed binary is stripped and the raw investigation directory referenced by `evidence.json` is unavailable in the workspace.

Relevant subsystem to inspect further is `monitor.c:monitor_read()`, with `serverloop.c:wait_until_can_do_something()` as a secondary target. The `[priv]` process title points to the monitor path, not the post-auth session loop.

Follow OpenSSH conventions already present in the subsystem: `poll()` in `monitor.c`, `ppoll()` plus `ptimeout_*` helpers in `serverloop.c`/`misc.c`, `fatal_f()`/`debug*_f()` logging, and `x*alloc` wrappers such as `xrecallocarray()`. No relevant project-specific file IO or process-spawn helper is implicated.

No prior Fixer patch is present in the workspace to improve or replace.

If extra evidence later proves a real tight loop, prefer a bounded local control-flow fix in the implicated loop, avoiding an awkward `goto`; for example, handle a specific persistent readiness/error condition directly in the loop body and add a regression test that demonstrates the repeated wakeup.

## Risks
A speculative source patch here would be misleading: the current evidence can be explained by normal privileged monitor behavior while blocked in `poll()`.

Changing monitor polling without a reproducer risks breaking log-drain ordering, monitor request dispatch, or signal behavior in privilege separation.

The Debian source includes downstream GSSAPI and packaging patches, but the intended fix, if any, should remain acceptable upstream OpenSSH code rather than a Debian-local workaround.

## Validation
First try the project-level entrypoint from the workspace root: `./configure && make`.

If that fails because build dependencies or generated files are missing, record the exact failing command and error, then use the narrowest reproducible build target, likely `make sshd-session` after any successful configure step.

For a bounded independent reproduction attempt, build an unstripped local `sshd-session` and run a minimal local sshd/regression scenario such as `make tests LTESTS=connection-timeout`, then check whether the privileged monitor shows repeated wakeups or CPU use. Do not claim `reproduced` unless that command or an equally bounded trace actually shows the failure signal.

## Patch Pass

Subject: no patch: diagnose sshd-session monitor poll sample

## Commit Message
No source change was made. The collected evidence points at an `sshd-session` privileged monitor blocked in `poll()`, not at a confirmed OpenSSH busy loop. The privileged monitor is the root-owned process that waits for requests from the unprivileged session child.

## Evidence Confidence
inferred

## Issue Connection
Fixer collected a profiler/trace signal for `sshd-session: gis [priv]`: a backtrace through libc `poll()`, one `restart_syscall` line over 5 seconds of strace, `/proc` state `S (sleeping)`, `wchan` `poll_schedule_timeout`, and only 0.3% total CPU across sampled `sshd-session` processes.

The likely root cause is a false-positive runaway-process classification. In `monitor.c`, `monitor_read()` intentionally calls `poll(..., -1)` while the privileged monitor waits for monitor messages or child log messages. That matches the process title `[priv]` and the `/proc` wait channel. The nearby post-auth session loop in `serverloop.c` uses the local `ptimeout_*` helpers from `misc.c`, but the evidence points first at the monitor path, where an indefinite `poll()` is the existing convention.

I followed the saved plan and did not change course: because the evidence is profiler/strace-based and the raw investigation directory named in `evidence.json` is unavailable, there is not enough evidence for an upstreamable source patch. No code change was made. The expected effect is to avoid landing a speculative monitor-loop change without a demonstrated repeated wakeup, CPU spin, or incorrect readiness condition.

Style/convention check: only `README.md` was present among the requested contribution docs. It points development to the OpenSSH mailing list/Bugzilla. Relevant local conventions found were `fatal_f()`/`debug*_f()` logging, `sshbuf_new()`/`sshbuf_*` buffer helpers, `x*alloc` allocation wrappers, `poll()` in `monitor.c`, and `ppoll()` with `ptimeout_*` in server/client event loops.

## Git Add Paths
None

## Validation
`./configure && make` failed from the workspace root with:
`configure: error: ./configure.ac newer than configure, run autoreconf`

Narrower reproducible build after regenerating generated files:
`autoreconf && ./configure && make sshd-session`
Result: passed; `sshd-session` linked successfully.

Bounded independent reproduction attempt:
`make tests LTESTS=connection-timeout`
Result: did not reproduce the Fixer signal. The test harness failed before the target runtime check with `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Additional blocker: the raw evidence artifact directory referenced by `evidence.json` was not present, so I could not inspect the original raw gdb/strace files beyond the bundled evidence summary.

## Review Pass 1 (local metadata check)

RESULT: fix-needed

## Findings
1. Patch metadata drift: the workspace currently changes `regress/authorized_keys_root`, `regress/ecdsa-sha2-nistp256`, `regress/ecdsa-sha2-nistp256.pub`, `regress/ecdsa-sha2-nistp384`, `regress/ecdsa-sha2-nistp384.pub`, `regress/ecdsa-sha2-nistp521`, `regress/ecdsa-sha2-nistp521.pub`, `regress/host.sk-ecdsa-sha2-nistp256@openssh.com`, `regress/host.sk-ssh-ed25519@openssh.com`, `regress/log/20260510T053258.446016.ssh.346.log`, `regress/sk-ecdsa-sha2-nistp256@openssh.com`, `regress/sk-ecdsa-sha2-nistp256@openssh.com.pub`, `regress/sk-ssh-ed25519@openssh.com`, `regress/sk-ssh-ed25519@openssh.com.pub`, `regress/ssh-ed25519`, `regress/ssh-ed25519.pub`, `regress/ssh-rsa`, `regress/ssh-rsa.pub`, `regress/sshd-log-wrapper.sh`, but `## Git Add Paths` lists `None`. Update `## Git Add Paths` to match the real shipped file set exactly, and make sure `## Issue Connection` explains every functional file that remains in the patch.
2. Missing from `## Git Add Paths`: `regress/authorized_keys_root`, `regress/ecdsa-sha2-nistp256`, `regress/ecdsa-sha2-nistp256.pub`, `regress/ecdsa-sha2-nistp384`, `regress/ecdsa-sha2-nistp384.pub`, `regress/ecdsa-sha2-nistp521`, `regress/ecdsa-sha2-nistp521.pub`, `regress/host.sk-ecdsa-sha2-nistp256@openssh.com`, `regress/host.sk-ssh-ed25519@openssh.com`, `regress/log/20260510T053258.446016.ssh.346.log`, `regress/sk-ecdsa-sha2-nistp256@openssh.com`, `regress/sk-ecdsa-sha2-nistp256@openssh.com.pub`, `regress/sk-ssh-ed25519@openssh.com`, `regress/sk-ssh-ed25519@openssh.com.pub`, `regress/ssh-ed25519`, `regress/ssh-ed25519.pub`, `regress/ssh-rsa`, `regress/ssh-rsa.pub`, `regress/sshd-log-wrapper.sh`.
2. Listed in `## Git Add Paths` but not actually changed: `None`.

## Refinement Pass 1

Subject: no patch: diagnose sshd-session monitor poll sample

## Commit Message
No source change was made. The review finding was addressed by removing generated regression artifacts so the final patch set is empty and consistent with the no-patch diagnosis.

## Evidence Confidence
inferred

## Issue Connection
Fixer collected an indirect profiler/trace signal for `sshd-session: gis [priv]`: a backtrace through libc `poll()`, one `restart_syscall` line over 5 seconds of strace, `/proc` state `S (sleeping)`, `wchan` `poll_schedule_timeout`, and 0.3% total CPU across sampled `sshd-session` processes.

The cautious code-level inference is that this is a likely false-positive runaway-process classification. The `[priv]` process title points at OpenSSH’s privileged monitor, and `monitor.c:monitor_read()` intentionally blocks in `poll(..., -1)` while waiting for monitor requests or child log messages. The nearby session event loop uses `ppoll()` with the local `ptimeout_*` helpers, but the evidence points first at the monitor path, where indefinite `poll()` is the existing pattern.

The specific refinement change was to remove the unintended `regress/` files generated by validation. No source diff remains. The expected effect is a clean, upstreamable no-patch report rather than a speculative monitor-loop change without evidence of repeated wakeups or CPU spin.

Style/convention check: only `README.md` was present among the requested contribution docs. Relevant local conventions found were `fatal_f()`/`debug*_f()` logging, `sshbuf_*` buffer helpers, `x*alloc` allocation wrappers, `poll()` in `monitor.c`, and `ppoll()` with `ptimeout_*` in server/client event loops.

## Git Add Paths
None

## Validation
`./configure && make`
Result: passed from the workspace root.

Bounded independent reproduction attempt from the prior authoring pass:
`make tests LTESTS=connection-timeout`
Result: did not reproduce the Fixer signal. The harness failed before the target runtime check with `Unsupported option UsePAM`, `Missing privilege separation directory: /var/empty`, and `FATAL: sshd_proxy broken`.

Review finding addressed:
`git status --short` and `git diff --name-only` are now clean after removing generated regression artifacts.

## Review Pass 2

RESULT: ok

No findings. The refined response is a no-patch diagnosis with `## Evidence Confidence` correctly set to `inferred`, and the workspace is clean, so `## Git Add Paths: None` matches the actual diff.

The author’s explanation stays within the indirect perf/strace/proc evidence, does not invent a reproduced failure, reports the project-level `./configure && make` validation, and notes the blocked bounded reproduction attempt without overstating it.